McGrey P212 MP Passive Speaker

Introduction

The McGrey P212 MP is a versatile passive full-range speaker designed for both stationary and mobile stage setups, suitable for indoor and outdoor environments. This manual provides essential information for the safe and efficient operation of your speaker.

Key features include:

• Passive full-range speaker with 120 W RMS / 600 W Peak power handling.
• 8 Ohm impedance.
• 2-way system featuring a 12-inch woofer and a 1-inch tweeter.
• Frequency range of 55 Hz - 18 kHz.
• Maximum sound pressure level (SPL) of 96 dB.
• Equipped with SPK-compatible input and output connectors.
• Durable black plastic housing with 3 carrying handles and a front metal grille.
• Integrated 35 mm stand flange with fixing screw for easy mounting.

Safety Information

Please read and understand all safety instructions before operating the speaker. Keep this manual for future reference.

• Power: Ensure the speaker is connected to an appropriate amplifier with matching impedance (8 Ohm). Do not exceed the maximum power handling (600 W Peak).
• Placement: Place the speaker on a stable, level surface or mount it securely on a compatible speaker stand using the 35 mm flange. Avoid placing it in direct sunlight, near heat sources, or in excessively humid environments.
• Ventilation: Do not block ventilation openings. Ensure adequate airflow around the speaker.
• Connections: Always make sure the amplifier is turned off before connecting or disconnecting cables to prevent damage to the speaker or amplifier. Use high-quality speaker cables.
• Hearing Protection: High sound pressure levels can cause permanent hearing damage. Use appropriate hearing protection when operating the speaker at high volumes.
• Cleaning: Disconnect the speaker from the amplifier before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or solvents.
• Service: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.

Package Contents

Upon unpacking, please verify that all listed items are present and in good condition:

• 1 x McGrey P212 MP Passive Speaker
• Integrated 35 mm stand flange with fixing screw
• 3 x Integrated carrying handles
• This User Manual

Setup

1. Speaker Placement

The McGrey P212 MP speaker can be used in various orientations:

• Floor Standing: Place the speaker directly on a stable, flat surface.
• Speaker Stand Mounting: Utilize the integrated 35 mm stand flange on the bottom of the speaker to mount it on a compatible speaker stand. Ensure the stand is stable and capable of supporting the speaker's weight (approximately 10.1 kg). Secure the speaker to the stand using the fixing screw.
• Monitor Position: The speaker's cabinet design allows it to be placed on its side for use as a floor monitor.

Figure 1: Angled view of the McGrey P212 MP Passive Speaker, showcasing its robust design and integrated handles.

Figure 2: The speaker positioned horizontally, demonstrating its capability for use as a floor monitor.

Figure 3: Bottom view of the speaker, highlighting the 35 mm stand flange for pole mounting.

2. Connections

The P212 MP features SPK-compatible connectors for input and linking to other speakers.

Figure 4: Detailed view of the rear connection panel, showing the SPK-compatible INPUT and LINK OUTPUT ports.

1. Ensure your amplifier is turned OFF before making any connections.
2. Connect a speaker cable from the output of your amplifier to the INPUT connector on the rear panel of the P212 MP speaker. Ensure a secure connection.
3. If you are connecting multiple passive speakers in a daisy-chain configuration, use the LINK OUTPUT connector to send the audio signal to the input of the next speaker. Ensure the total impedance load on your amplifier is within its safe operating range.
4. Once all connections are secure, you may power on your amplifier.

Operating

The McGrey P212 MP is a passive speaker, meaning it requires an external amplifier to produce sound. Its operation is straightforward once properly connected.

1. Power On: After ensuring all connections are correct and secure, power on your audio source (e.g., mixer, media player) and then your amplifier.
2. Volume Control: Start with the amplifier's volume control at its minimum setting. Gradually increase the volume to a comfortable listening level. Avoid setting the volume too high, which can lead to distortion and potential damage to the speaker or your hearing.
3. Audio Playback: Begin playing audio through your connected source. Adjust the volume and equalization on your amplifier or mixer as needed to achieve the desired sound.
4. Power Off: When finished, first turn down the amplifier's volume, then power off the amplifier, and finally power off your audio source. This sequence helps prevent sudden pops or surges that could damage equipment.

Figure 5: The McGrey P212 MP speakers are suitable for various applications, including home entertainment and small events.

Maintenance

Proper maintenance will ensure the longevity and optimal performance of your McGrey P212 MP speaker.

• Cleaning: Regularly wipe the speaker cabinet with a soft, dry, lint-free cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the speaker grille or connectors. Do not use abrasive cleaners, waxes, or solvents.
• Storage: If storing the speaker for an extended period, keep it in a cool, dry place, away from direct sunlight and extreme temperatures. Consider using a protective cover to prevent dust accumulation.
• Inspection: Periodically check all cables and connectors for signs of wear or damage. Ensure all screws and fasteners are tight.

Troubleshooting

If you encounter issues with your McGrey P212 MP speaker, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact McGrey customer support or a qualified service technician.

Specifications

Warranty and Support

McGrey products are built to high quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided at the time of purchase or visit the official McGrey website.

For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your authorized McGrey dealer or the McGrey customer service department.

Contact Information:

• Website: www.mcgrey.de
• Email: support@mcgrey.de

Please have your product model (P212 MP) and serial number (if applicable) ready when contacting support.