saschedross LC-H260100

Download PDF
Contents

saschedross AC/DC Adapter for Medcursor Massage Guns (Model LC-H260100)

Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your saschedross AC/DC Adapter, Model LC-H260100. This power supply is designed to charge and power compatible Medcursor deep tissue percussion massage guns, including models MG03 Pro, MMG0301, MG02, MMG0201, Mg03Pro, Mg03 Pro, Mg02 Pro, and Mg02Pro. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

To ensure safe operation and prevent damage, observe the following safety precautions:

  • Input Voltage: This adapter is designed for a wide input voltage range of 100-240VAC, 50/60Hz. Ensure your wall outlet voltage is within this range.
  • Protection Features: The adapter includes Over Voltage Output Protection (OVP), Over Current Output Protection (OCP), and Short Circuit Output Protection (SCP) to safeguard your devices.
  • Indoor Use Only: This adapter is intended for indoor use in dry locations. Do not expose it to water, moisture, or extreme temperatures.
  • Proper Connection: Always ensure the adapter is fully inserted into the wall outlet and the barrel connector is securely plugged into the compatible device.
  • Avoid Damage: Do not use the adapter if the cord or plug is damaged. Do not attempt to open or repair the adapter yourself. Refer all servicing to qualified personnel.
  • Unplug When Not in Use: Disconnect the adapter from the power outlet when not in use for extended periods.

3. Product Overview

The saschedross AC/DC Adapter (Model LC-H260100) is a compact, external power supply designed for efficient charging and powering of your Medcursor massage gun. It features a durable plastic enclosure and a standard barrel connector.

3.1 Components

  • AC/DC Adapter Unit (Black, compact wall-mount design)
  • Integrated Power Cord with Barrel Connector

3.2 Dimensions and Cable Length

Diagram showing the dimensions of the saschedross AC/DC adapter. The adapter measures approximately 2.7 inches in height and 1.2 inches in width from the front view, and 1.6 inches in depth from the side view.

Figure 1: Adapter Dimensions. The adapter unit measures approximately 2.7 inches (height) x 1.2 inches (width) x 1.6 inches (depth).

Image of the saschedross AC/DC adapter with its power cord coiled, indicating a cable length of 6.5 feet.

Figure 2: Adapter with Cable. The integrated power cord has a length of approximately 6.5 feet.

4. Setup

Follow these steps to set up your AC/DC adapter:

  1. Verify Compatibility: Ensure your Medcursor massage gun requires a 26V 1A power supply and uses a barrel connector. This adapter is compatible with models such as MG03 Pro, MMG0301, MG02, MMG0201, Mg03Pro, Mg03 Pro, Mg02 Pro, and Mg02Pro.
  2. Connect to Device: Insert the barrel connector end of the adapter's cord firmly into the charging port of your Medcursor massage gun.
  3. Plug into Outlet: Insert the adapter's two-prong plug into a standard North American (Type A) wall outlet.
A hand plugging the saschedross AC/DC adapter into a wall outlet, demonstrating the setup process.

Figure 3: Plugging in the Adapter. Ensure the adapter is securely plugged into a wall outlet.

5. Operating Instructions

Once the adapter is connected to both the wall outlet and your Medcursor massage gun, it will begin to supply power or charge the device's battery. Refer to your massage gun's instruction manual for specific charging indicators and operational details.

  • The adapter provides a stable 26V DC output at 1A.
  • Charging times will vary depending on the battery level and model of your massage gun.
  • Always ensure the adapter is placed in a well-ventilated area during operation.

6. Maintenance

Proper care will extend the life of your adapter:

  • Cleaning: Disconnect the adapter from the power source and device before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid tightly coiling the cable to prevent damage.
  • Inspection: Periodically inspect the adapter, cord, and connector for any signs of damage, such as fraying, cuts, or bent pins. If damage is found, discontinue use immediately.

7. Troubleshooting

If you encounter issues with your adapter, try the following steps:

  • No Power to Device:
    • Ensure the adapter is fully plugged into a working wall outlet.
    • Verify the barrel connector is securely inserted into your massage gun's charging port.
    • Test the wall outlet with another device to confirm it has power.
    • Check for any visible damage to the adapter or cable. If damaged, discontinue use.
  • Device Not Charging:
    • Confirm that your massage gun is compatible with a 26V 1A power supply.
    • Ensure the massage gun's battery is not fully charged or defective.
    • Refer to your massage gun's manual for specific charging indicators and troubleshooting.

If problems persist, contact customer support.

8. Specifications

Feature Specification
Model Number LC-H260100
Brand saschedross
Input Voltage 100-240VAC, 50/60Hz
Output Voltage 26V DC
Output Current 1A
Wattage 26W
Connector Type Barrel Connector
Power Plug Type Type A - 2 pin (North American)
Compatible Devices Medcursor MG03, MG0301, MG02, MG0201, Mg03Pro, Mg03 Pro, Mg02 Pro, Mg02Pro Deep Tissue Percussion Massage Guns
Protection Features OVP, OCP, SCP
Color Black
Material Plastic
Form Factor Compact External Power Supply, Wall Mount
Manufacturer Shenzhen Waweis Technology Co., Ltd

9. Warranty and Support

This saschedross AC/DC Adapter comes with a 1-year service warranty from the date of purchase. Additionally, a 30-day money-back guarantee is offered. For warranty claims, technical support, or any inquiries, please contact your retailer or the manufacturer directly.

Manufacturer: Shenzhen Waweis Technology Co., Ltd

Please retain your proof of purchase for warranty purposes.

© 2023 saschedross. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.