1. Product Overview
The atomberg Renesa 400mm Pedestal Fan is a 5-star rated, energy-efficient BLDC stand fan designed for optimal air delivery and quiet operation in homes and offices. It features a modern design with an LED display and comes with a remote control for convenient operation.
- Energy-Efficient BLDC Technology: Consumes only 35W at top speed, saving up to 35% in electricity.
- High Air Delivery: Offers 76 CMM (Cubic Meters Per Minute) and a speed of 1500 RPM.
- Quiet Operation: Noise levels are less than 55 dB.
- Dual Control: Operable via IR remote and a feather-touch button.
- Wide Coverage: Features a 90° automatic swing and up to 30° manual tilt.
- Easy Maintenance: Designed for simple assembly and cleaning with high-quality PP blades.
- Consistent Performance: Maintains speed during voltage fluctuations (165V-285V).
The atomberg Renesa Pedestal Fan, showcasing its sleek design in a home environment.
2. Safety Instructions
Please read all safety instructions carefully before using the fan to prevent injury or damage. Keep this manual for future reference.
- Ensure the fan is placed on a stable, level surface to prevent tipping.
- Do not insert fingers or any objects through the grill when the fan is operating.
- Keep children and pets away from the fan during operation.
- Unplug the fan from the power outlet before cleaning or performing any maintenance.
- Do not use the fan near water or in excessively humid environments.
- Avoid using the fan with a damaged cord or plug. Contact customer support for assistance.
3. Package Contents
Verify that all items are present in the box upon unboxing:
- Blade set - 1 Unit
- Remote - 1 Unit
- Motor box - 1 Unit
- Shackle kit - 1 Unit
- Manual Leaflet & Warranty card - 1 Unit
4. Setup and Assembly
The atomberg Renesa Pedestal Fan is designed for easy plug-and-play installation. Follow these general steps for assembly:
- Securely attach the base to the main stand pole.
- Connect the motor unit to the top of the stand pole.
- Install the fan blades onto the motor shaft, ensuring they are properly aligned and secured.
- Attach the front and rear safety grills, making sure they are firmly locked in place.
- Plug the power cord into a suitable electrical outlet.
5. Operating Instructions
The fan can be controlled using the included IR remote or the feather-touch button on the unit.
5.1. Remote Control Functions
The universal IR remote allows for convenient adjustment of fan settings:
- Power Button: Turns the fan On/Off.
- Speed Control: Adjusts between 6 different speed levels.
- Boost Mode: Activates the highest speed setting for maximum airflow.
- Timer Mode: Sets a timer for automatic fan shutdown after a pre-set duration.
- Sleep Mode: Gradually decreases fan speed for comfortable sleep.
- Oscillation Control: Toggles the 90° automatic swing function.
This image highlights the fan's modern design, featuring a clear digital display for speed settings and a responsive feather-touch button for easy control.
5.2. Manual Controls
The feather-touch button on the fan's body allows for basic power and speed adjustments.
5.3. Oscillation and Tilt
- 90° Swing: The fan head automatically oscillates 90 degrees to distribute air across a wider area. This can be controlled via the remote.
- 30° Tilt: The fan head can be manually tilted up to 30 degrees to direct airflow precisely where needed.
This visual demonstrates the fan's ability to provide extensive air coverage through its 90-degree automatic swing and up to 30-degree manual tilt, allowing precise airflow direction.
6. Maintenance
Regular cleaning and maintenance will ensure optimal performance and longevity of your fan.
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to wipe down the exterior surfaces.
- The high-quality PP blades are designed for easy cleaning. Carefully remove the front grill and wipe the blades with a damp cloth. Ensure blades are dry before reassembling.
- Do not use abrasive cleaners or solvents, as they may damage the fan's finish.
- Ensure all parts are dry before plugging the fan back in.
7. Troubleshooting
If you encounter any issues with your atomberg Renesa Pedestal Fan, refer to the following common troubleshooting steps:
- Fan not turning on: Check if the power cord is securely plugged into a working outlet. Ensure the remote control batteries are not depleted.
- Reduced airflow: Clean the fan blades and grills to remove any dust or obstructions. Ensure the fan is not placed too close to walls or furniture that might block airflow.
- Unusual noise: Check for any loose parts, especially the fan blades and grills. Ensure the fan is assembled correctly and placed on a stable surface.
- Remote control not working: Replace the batteries in the remote control. Ensure there are no obstructions between the remote and the fan's sensor.
If the problem persists after trying these steps, please contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | atomberg |
| Model Name | Renesa Pedestal |
| Electric Fan Design | Floor Fan |
| Power Source | Corded Electric |
| Product Dimensions | 60D x 20W x 46H Centimeters |
| Special Feature | Inverter Compatible, Remote Controlled |
| Controller Type | Remote Control |
| Number Of Speeds | 6 |
| Noise Level | 55 Decibels |
| Wattage | 35 Watts |
| Number of Blades | 3 |
| Air Flow Capacity | 76 Cubic Meters Per Minute |
| Speed | 1500 RPM |
| Voltage | 220 Volts |
| Motor Type | BLDC |
| Installation Type | Plug and Play |
| Material Type | Plastic |
| Blade Material | Plastic |
| Blade Length | 400 Millimetres |
| Item Weight | 6.35 Kilograms |
| Country of Origin | India |
9. Warranty and Support
Your atomberg Renesa Pedestal Fan comes with a comprehensive warranty and dedicated customer support.
- Standard Warranty: A standard 1-year warranty is included with your purchase.
- Extended Warranty: An additional 1-year warranty can be availed by registering your purchase on the official Atomberg website.
- Onsite Service: Atomberg offers a PAN India service network for convenient support.
The fan comes with a standard 1-year warranty, extendable by an additional year upon website registration, supported by a wide service network across India.
Customer Support:
For any queries, technical assistance, or warranty claims, please contact:
- Manufacturer: Atomberg Technologies Pvt Ltd
- Customer Care Email: support@atomberg.com
- Customer Care Phone: 08448449442
10. Product Videos
No official product videos with 'Seller' creator type and m3u8 format were found in the provided product data to embed. Please refer to the product page for any available video content.
