atomberg Renesa Pedestal Fan

atomberg Renesa 400mm Pedestal Fan User Manual

Model: Renesa Pedestal Fan

1. Introduction

Thank you for choosing the atomberg Renesa 400mm Pedestal Fan. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new fan. The Renesa Pedestal Fan is designed for optimal air delivery and energy efficiency, featuring a BLDC motor, remote control, and a sleek design suitable for any home or office environment.

Key Features:

  • Energy-Efficient BLDC Technology: 5-star rated, consumes only 35W at top speed.
  • High Air Delivery: 76 CMM with a speed of 1500 RPM.
  • Low Noise Operation: Less than 57 dB.
  • Remote Control Convenience: Adjust speed, activate boost mode, set timers, enable sleep mode, and control oscillation.
  • Wide Coverage: 90° swing and 30° manual tilt.
  • Portable and Easy to Maintain: Lightweight design with high-quality ABS blades for easy cleaning.

2. Safety Instructions

Please read all safety instructions carefully before using the fan to prevent injury or damage.

  • Always ensure the fan is placed on a stable, flat surface to prevent it from tipping over.
  • Do not insert fingers or any objects into the fan grille when it is operating.
  • Keep the fan away from water or other liquids. Do not use it in wet environments.
  • Unplug the fan from the power outlet before cleaning, assembling, or disassembling.
  • Do not operate the fan with a damaged cord or plug. Contact customer support for repairs.
  • Ensure the voltage rating on the fan matches your local power supply.
  • Keep children and pets away from the fan during operation.

3. Package Contents

Verify that all items are present in the package:

  • 1 x Motor Unit
  • 1 x Down Rod
  • 1 x Set of Blades (3 blades)
  • 1 x Remote Control
  • 1 x Mounting Kit (includes base, grilles, fasteners)
  • 1 x Warranty Card

4. Setup and Assembly

The atomberg Renesa Pedestal Fan is designed for easy assembly. Follow these steps:

  1. Assemble the Base: Attach the down rod to the fan base using the provided fasteners. Ensure it is securely tightened.
  2. Attach the Motor Unit: Carefully slide the motor unit onto the top of the down rod. Secure it with the locking mechanism or screws as indicated in the diagram.
  3. Install the Rear Grille: Place the rear grille onto the motor unit, aligning the notches. Secure it with the provided nut.
  4. Attach the Blades: Slide the fan blades onto the motor shaft, ensuring they are properly seated. Secure them with the blade cap.
  5. Install the Front Grille: Place the front grille over the blades and align it with the rear grille. Secure the grilles together using the clips or fasteners around the rim.
Assembled atomberg Renesa Pedestal Fan with remote control
Figure 4.1: Fully assembled atomberg Renesa Pedestal Fan with its remote control.
Close-up of atomberg Renesa Pedestal Fan showing digital speed display, sleek design, and feather touch button
Figure 4.2: Detailed view of the fan's digital speed display and feather-touch control button.

5. Operating Instructions

Your Renesa Pedestal Fan can be operated using the feather-touch button on the fan body or the included IR remote control.

5.1 Using the Remote Control

The IR remote control provides full functionality for convenient operation from a distance. Ensure the remote has working batteries.

atomberg Renesa Pedestal Fan remote control with labeled buttons for speed, boost, timer, sleep, and oscillation
Figure 5.1: The universal remote control for the atomberg Renesa Pedestal Fan.
  • Power Button (): Turns the fan ON or OFF.
  • Speed Control (1-6): Adjusts the fan speed from 1 (lowest) to 6 (highest). The digital display on the fan will show the current speed.
  • Boost Mode: Increases the fan to its highest speed instantly.
  • Timer Mode: Sets the fan to turn off automatically after a pre-set number of hours. Press repeatedly to cycle through timer options.
  • Sleep Mode: Gradually decreases the fan's speed every two hours for comfortable sleep.
  • Oscillation Control: Activates or deactivates the 90° automatic swing function.

5.2 Using the Feather-Touch Button

The feather-touch button on the fan body allows for basic control:

  • Press once to turn the fan ON.
  • Subsequent presses will cycle through speed settings.
  • Long press to turn the fan OFF.
  • The feather-touch button also controls oscillation.
atomberg Renesa Pedestal Fan demonstrating 90 degree swing and 30 degree manual tilt
Figure 5.2: The fan offers a 90° automatic swing and a 30° manual tilt for wide air coverage.

6. Maintenance

Regular cleaning and maintenance will ensure the longevity and optimal performance of your fan.

  • Cleaning: Always unplug the fan before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces. The ABS blades are designed for easy cleaning; wipe them gently to remove dust. Do not use abrasive cleaners or solvents.
  • Storage: If storing the fan for an extended period, ensure it is clean and dry. Store it in a cool, dry place, preferably in its original packaging to protect it from dust and damage.
  • Motor: The BLDC motor is maintenance-free and does not require lubrication.

7. Troubleshooting

If you encounter issues with your fan, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Fan does not turn on.No power supply.
Power cord not properly connected.
Check if the fan is plugged into a live outlet.
Ensure the power cord is securely connected.
Low airflow.Fan blades or grilles are dirty.
Incorrect speed setting.
Clean the fan blades and grilles.
Increase the fan speed using the remote or button.
Fan is noisy.Loose parts.
Fan not on a stable surface.
Check for any loose components and tighten them.
Place the fan on a flat, stable surface.
Remote control not working.Dead batteries.
Obstruction between remote and fan.
Replace the batteries in the remote control.
Ensure a clear line of sight to the fan's receiver.

Note: The atomberg Renesa Pedestal Fan maintains consistent speed even during voltage fluctuations ranging between 165V-285V. If the issue persists after attempting these solutions, please contact atomberg customer support.

8. Specifications

FeatureSpecification
Brandatomberg
Model NameRenesa Pedestal Fan
ColourMidnight Black
Electric Fan DesignPedestal Fan (Table Fan design for head)
Power SourceCorded Electric
Product Dimensions60D x 23W x 47H Centimeters
Special FeatureInverter Compatible, Remote Controlled
Noise Level57 dB
Wattage35 Watts
Number of Blades3
Air Flow Capacity76 Cubic Metres per Minute
Blade Length400 Millimetres
Speed1500 RPM
Voltage230.0 V
Item Weight6.4 Kilograms
Control MethodRemote
Blade MaterialPlastic
Number of Power Levels6
Country of OriginIndia

9. Warranty and Support

Your atomberg Renesa Pedestal Fan comes with a standard 1-year warranty. You can avail an additional 1-year warranty by registering your purchase on the official atomberg website. The registration process is simple and takes only three steps.

atomberg offers professional installation services at a nominal cost across India. To inquire about this service or for any support needs, please contact us:

atomberg warranty information showing 1+1 years warranty and PAN India service network
Figure 9.1: Warranty and service network details for atomberg products.

© 2024 atomberg. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.