1. Introduction
Welcome to the TEEHO TE002 Fingerprint Door Lock user manual. This guide provides detailed instructions for the installation, setup, operation, and maintenance of your new keyless entry electronic keypad deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and security.
2. Product Overview
The TEEHO TE002 is a smart deadbolt designed for convenient and secure access to your home. It offers multiple unlocking methods and smart features for enhanced security and ease of use.
Key Features
- Easy Installation: Can be installed in minutes with just a screwdriver, no drilling required. Compatible only with 2-1/8" (54mm) door holes.
- One-Time Code: Set a temporary PIN code that automatically deletes after single use for secure guest access.
- Convenient Keyless Entry: Supports up to 20 unique access codes and fingerprints for family members and temporary codes for guests.
- Secure Fingerprint Unlock: Biometric fingerprint identification technology unlocks your door in approximately 1 second with a 0.3-second recognition time.
- Smart Locking Features: Adjustable automatic door lock timer (10-99 seconds) and one-touch auto-lock by pressing and holding any keypad key for 2 seconds.
Package Contents
- TEEHO Fingerprint Deadbolt Door Lock
- 1 Standard Key
- Latch
- Strike Plate
- Installation Instructions
- Programming Instructions
Figure 2.1: TEEHO TE002 Fingerprint Door Lock, showcasing the keypad, fingerprint sensor, and keyhole.
3. Installation Guide
The TEEHO TE002 is designed for easy installation, typically requiring only a screwdriver. No additional drilling is needed if your door has a standard 2-1/8" (54mm) door hole.
Before You Begin
Ensure your door meets the compatibility requirements:
- Door Hole Diameter: Only suitable for 2-1/8" (54mm) door holes.
- Door Thickness: 1-3/8" to 2" (35mm to 50mm).
- Not compatible with Rim Cylinder, Mortise, or Integrated lock types.
Figure 3.1: Door compatibility and dimensions for the TEEHO TE002 lock.
Step-by-Step Installation
For detailed, illustrated installation steps, please refer to the dedicated Installation Instructions included in your package or download the PDF manual:
4. Initial Setup and Programming
After installation, you will need to program your lock with user codes and fingerprints.
Adding User Codes
The lock supports up to 20 user codes. Follow the programming instructions to add, modify, or delete user codes. Remember to choose strong, unique codes.
Figure 4.1: The lock supports up to 20 user codes and 20 fingerprints, along with physical key access.
Adding Fingerprints
The lock can store up to 20 fingerprints. For optimal recognition, ensure your finger is clean and dry when enrolling. It is recommended to enroll the same finger multiple times from different angles.
Figure 4.2: Quick and secure fingerprint unlocking with 0.3s biometric identification.
One-Time Passwords
Generate one-time PIN codes for temporary access. These codes are automatically deleted after a single use, providing secure access for visitors or service personnel.
Figure 4.3: Securely provide temporary access using one-time passwords.
5. Daily Operation
Unlocking the Door
- Fingerprint: Place your enrolled finger on the sensor.
- Keypad Code: Enter your valid user code on the keypad.
- Physical Key: Use the provided standard key as a backup.
Locking the Door
- Automatic Lock: The lock can be set to automatically lock after 10-99 seconds.
- One-Touch Lock: Press and hold any key on the keypad for 2 seconds to instantly lock the door.
Figure 5.1: The lock features adjustable auto-lock and convenient one-touch locking.
6. Maintenance
Battery Replacement
The TEEHO TE002 operates on 4 AA batteries (not included). The lock features a low battery indicator to alert you when replacement is needed. Battery life is approximately 6 months under normal usage. Replace all four batteries simultaneously for optimal performance.
Figure 6.1: The lock offers energy conservation with a low battery indicator.
Cleaning
Wipe the lock surface with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish or electronic components.
7. Troubleshooting
If you encounter issues with your TEEHO TE002 lock, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lock does not respond to keypad/fingerprint. | Low batteries; incorrect code/fingerprint; system error. | Replace batteries; re-enter code/fingerprint; try physical key; reset lock if necessary (refer to programming instructions). |
| Fingerprint not recognized. | Finger is wet/dirty; poor enrollment; sensor dirty. | Ensure finger and sensor are clean and dry; re-enroll fingerprint; try different finger. |
| Auto-lock feature not working. | Feature disabled; incorrect timer setting. | Check programming instructions to enable and set auto-lock timer. |
| Keypad lights do not illuminate. | Batteries are completely dead. | Replace batteries immediately. |
If the problem persists, please contact TEEHO customer support.
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | TEEHO |
| Model Name | TE002 |
| Lock Type | Deadbolt |
| Special Features | Fingerprint unlock, One-time Access, Auto Lock, One-touch Anti-peeping Password, IP54 Waterproof |
| Material | Aluminum |
| Color | Oil Rubbed Bronze |
| Item Dimensions L x W x H | 5.12 x 2.95 x 1.3 inches |
| Item Weight | 1 Pounds |
| Power Source | 4 AA Batteries (not included) |
| Connectivity Protocol | Nonconnected |
| UPC | 762765885963 |
9. Warranty and Customer Support
TEEHO is committed to providing quality products and excellent customer service.
- 30-Day Customer Commitment: TEEHO offers a 30-day commitment for customer satisfaction.
- 1-Year Product Support: Enjoy 1-year product support on all parts.
- Lifetime After-Sales Customer Service: TEEHO provides lifetime after-sales customer service.
For assistance, please contact TEEHO customer service:
- Online Phone Support: Monday to Friday, 9 AM to 5 PM PST.
- Online Email Service: Available 24/7.
