1. Product Overview
The QEEIG Floating Shelves (Model FS015) are designed to provide versatile and stylish storage solutions for various rooms in your home. Made from durable Medium Density Fiberboard (MDF) with a laminated finish, these shelves offer a clean, modern aesthetic with invisible brackets for a seamless "floating" effect.
Each shelf measures 6.7 inches deep, 15.7 inches wide, and 1.5 inches high, providing ample space for books, toiletries, decorative items, or small plants. The enhanced steel brackets ensure sturdy support, holding up to 25 lbs per shelf without leaning or sagging.
Image: Set of three QEEIG floating shelves with their hidden metal brackets.
2. Package Contents
Before beginning assembly, please ensure all parts are present and undamaged. The package includes:
- 3 x MDF Boards (Shelves)
- 3 x Metal Brackets
- 1 x Hardware Kits (screws, wall anchors, mini leveler)
- 1 x Instructions (this manual)
3. Setup and Installation
Assembly is designed to be quick and straightforward, typically taking only a few minutes per shelf. A detailed assembly video is provided below for visual guidance.
Required Tools (Not Included):
- Drill
- Hammer
- Screwdriver
Installation Steps:
- Mark Holes Location: Use the provided mini leveler and a pencil to mark the desired position for the bracket on the wall. Ensure the bracket is level.
- Install Bracket:
- For Wood Studs: Align the bracket with the marked holes and secure it directly into the wood studs using the provided screws. The bracket is designed for 16-inch screw spacing to align with standard gypsum board studs.
- For Concrete or Brick Walls: Drill pilot holes at the marked locations. Insert the wall anchors into the pilot holes using a hammer. Then, secure the bracket to the wall using the screws.
- Slide the Board into Bracket: Carefully slide the MDF shelf board onto the metal rods of the installed bracket.
- Secure the Boards: Use the short screws provided to fix the boards to the brackets from underneath, ensuring a stable and secure fit.
Image: Product dimensions for installation planning.
Image: Illustration of the non-sagging steel brackets with a 2.5° elevated angle for stability.
Video: Official QEEIG assembly guide for floating shelves (Model FS008/FS015). This video demonstrates marking hole locations, installing brackets for different wall types, sliding boards onto brackets, and securing them with screws.
4. Operating and Usage
These floating shelves are designed for various applications throughout your home, including bathrooms, bedrooms, kitchens, and living rooms. They are ideal for displaying decorative items, storing toiletries, books, or small kitchen essentials.
- Weight Limit: Each shelf can safely hold up to 25 lbs (11.3 kg). Do not exceed this weight limit to ensure stability and prevent damage.
- Placement: The invisible bracket design creates a clean look, perfect for filling empty wall spaces above desks, fireplaces, entryways, or vanities.
- Versatility: Use them to organize items in the bathroom (shampoo, towels), display collectibles in the living room, or hold spices in the kitchen.
Image: Example of shelves used in a bathroom setting.
Image: Close-up showing the "invisible clean look" of the floating shelf.
Video: Official QEEIG video showcasing floating shelves in various home settings, highlighting their versatility and aesthetic appeal.
5. Maintenance
To maintain the appearance and longevity of your QEEIG Floating Shelves, follow these simple care instructions:
- Cleaning: Wipe the shelves with a dry, soft cloth to remove dust and light smudges.
- Avoid Moisture: While the shelves are durable, avoid prolonged exposure to excessive moisture to prevent damage to the MDF material and laminated finish.
- Inspection: Periodically check the mounting screws and brackets to ensure they remain tight and secure. Tighten if necessary.
6. Troubleshooting
If you encounter any issues with your floating shelves, please refer to the following common solutions:
- Shelf is not level: Ensure the mounting bracket was installed perfectly level. Adjust the bracket if needed. The included mini leveler is crucial for this step.
- Shelf feels wobbly or unstable: Verify that all screws are securely tightened into the wall and the shelf board. If installing into drywall without studs, ensure the wall anchors are correctly installed and fully expanded.
- Shelf is sagging: Check that the weight on the shelf does not exceed the 25 lbs limit. Redistribute items or remove excess weight. Ensure the bracket is properly secured to a stud or appropriate wall anchors.
- Difficulty sliding board onto bracket: Ensure the bracket rods are clean and free of obstructions. Gently align the shelf's pre-drilled holes with the rods and apply even pressure.
7. Specifications
| Brand | QEEIG |
| Model Name | FS015 |
| Product Dimensions | 6.7"D x 15.7"W x 1.5"H |
| Item Weight | 5.7 pounds (for the set of 3) |
| Material | Engineered Wood (Medium Density Fiberboard) |
| Finish Type | Laminated |
| Color | B. White |
| Number of Items | 3 shelves |
| Weight Limit | 25 Pounds per shelf |
| Installation Type | Wall Mount (Invisible Brackets) |
| Assembly Required | Yes |
| Product Care Instructions | Wipe with Dry Cloth |
| UPC | 740207900061 |
8. Safety Information
WARNING: Ensure proper wall mounting and do not exceed the weight limit of 25 lbs per shelf to prevent accidents and potential injury.
9. Warranty and Support
For any questions, concerns, or support regarding your QEEIG Floating Shelves, please contact QEEIG customer service through the retailer where the product was purchased. Please retain your proof of purchase for warranty claims, if applicable.
Visit the QEEIG Store for more products and information.
