Introduction
This manual provides essential information for the safe and efficient operation of your Optimus H-7236 18-inch Tower Space Heater. Please read all instructions carefully before use and retain this manual for future reference.
Important Safety Instructions
WARNING: To reduce the risk of fire, electric shock, or injury, observe the following:
- Read all instructions before using this heater.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
- Always use this heater on a stable, flat surface.
- Do not use this heater in bathrooms, laundry areas, or similar indoor locations where water is present.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- This heater has an internal heat limiting thermostat and an overheat protection circuit. If the heater overheats, the circuit will automatically shut off the heater.
- This heater is equipped with a tip-over safety switch. If the heater is accidentally tipped over, it will automatically shut off.
Product Overview
The Optimus H-7236 is an 18-inch tower space heater designed for indoor use, featuring two heat settings and automatic thermostat control. It includes safety features such as a tip-over switch and overheat protection.
Figure 1: Optimus H-7236 18-inch Tower Space Heater. This image displays the black tower heater with its front grille and top control knobs visible.
Key Features:
- Two Heat Settings: 750 and 1500 watts for versatile heating.
- Automatic Thermostat Control Switch: Maintains desired room temperature.
- Tip-over Safety Switch: Automatically shuts off the unit if it tips over.
- Internal Heat Limiting Thermostat: Prevents overheating.
- Overheat Protection Circuit: Additional safety measure against excessive heat.
- Oscillating Function: Distributes heat evenly across the room.
- Cool Touch Housing: Designed to remain cool to the touch during operation.
Setup
- Unpacking: Carefully remove the heater from its packaging. Retain packaging for off-season storage.
- Placement: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 meters) of clear space around the heater from walls, furniture, and other objects. Do not place the heater on soft surfaces like rugs or carpets that could block the air intake.
- Power Connection: Ensure the heater is switched to the "OFF" position before plugging it into a 120V AC, 60Hz electrical outlet. Do not use an extension cord or power strip with this heater.
Operating Instructions
Control Panel:
Figure 2: Top view of the heater showing the control knobs. The left knob controls the thermostat, and the right knob selects the operating mode (OFF, FAN, LOW, HIGH, OSC).
- Power On: Plug the heater into a suitable electrical outlet.
- Select Mode: Turn the right control knob to select your desired operating mode:
- FAN: Operates as a fan only, without heat.
- LOW (750W): Provides low heat output.
- HIGH (1500W): Provides high heat output.
- OSC: Activates the oscillation function, allowing the heater to rotate and distribute heat more widely. This can be combined with FAN, LOW, or HIGH settings.
- Set Thermostat: Turn the left control knob to adjust the thermostat.
- To increase the temperature, turn the knob clockwise towards the "+" symbol.
- To decrease the temperature, turn the knob counter-clockwise towards the "-" symbol.
- The heater will cycle on and off to maintain the set temperature.
- Power Off: To turn off the heater, turn the right control knob to the "OFF" position. Unplug the heater from the outlet when not in use.
Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning:
- Always unplug the heater before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the heater.
- Do not use abrasive cleaners or solvents.
- Ensure no water enters the interior of the heater.
- Storage:
- Store the heater in a cool, dry location when not in use.
- It is recommended to store the heater in its original packaging to protect it from dust and damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Not plugged in; power switch off; tip-over switch activated; overheat protection activated. | Ensure plug is firmly in outlet; turn power switch to ON; place heater on a flat surface; unplug and allow to cool for 30 minutes before restarting. |
| Heater produces no heat. | Thermostat set too low; mode set to FAN only. | Increase thermostat setting; select LOW or HIGH heat mode. |
| Heater cycles on and off frequently. | Room temperature reached set thermostat level. | This is normal operation. If desired, adjust thermostat to a higher setting. |
Specifications
- Model: H-7236
- Brand: Optimus
- Power Settings: 750W / 1500W
- Voltage: 120V AC, 60Hz
- Dimensions: 7.2 x 7.2 x 18.3 inches (L x W x H)
- Weight: 4.3 pounds
- Features: Oscillating, Automatic Thermostat, Tip-over Safety Switch, Overheat Protection
- Indoor/Outdoor Usage: Indoor only
- UPC: 630326172367
Warranty Information
This Optimus H-7236 Tower Space Heater comes with a 3-year manufacturer's warranty. Please refer to the warranty card included with your product for full terms and conditions. Keep your purchase receipt as proof of purchase.
Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Optimus customer support. Contact information can typically be found on the product packaging or the official Optimus website.
