InnoGIO Mini Mesh Nebulizer GIO-605 User Manual

1. Introduction

Thank you for choosing the InnoGIO Mini Mesh Nebulizer, Model GIO-605. This portable, medical-certified membrane nebulizer is designed for effective respiratory treatment for both adults and children. Its compact size, quiet operation, and dual power options make it a convenient solution for managing respiratory conditions. Please read this manual thoroughly before first use to ensure safe and proper operation.

2. Product Overview and Components

The InnoGIO Mini Mesh Nebulizer utilizes vibrating mesh technology to efficiently deliver medication in fine particles (approximately 5 µm diameter) for optimal inhalation. The device is designed for ease of use with a single-button operation.

Figure 1: InnoGIO Mini Mesh Nebulizer GIO-605. This image shows the compact, white nebulizer unit with a clear medication cup and a grey power button.

What's Included:

• 1 x InnoGIO Mini Mesh Nebulizer Unit (Model GIO-605)
• 1 x Adult Mask
• 1 x Child Mask
• 1 x Mouthpiece
• 1 x Medication Cup (integrated or detachable, depending on model variant)
• 1 x USB Power Cable
• 1 x Storage Pouch

Figure 2: Nebulizer unit displayed with its full set of accessories, including adult mask, child mask, mouthpiece, USB cable, and a storage pouch.

3. Safety Information

This device is a medical product. Always consult your doctor or pharmacist before using any medication with this nebulizer. Follow these safety guidelines:

• Do not use the device if it is damaged.
• Keep out of reach of children when not in use.
• Use only prescribed medication suitable for nebulization.
• Do not immerse the main unit in water or other liquids.
• Ensure the medication cup is securely attached before operation.
• Disconnect from power source before cleaning.
• Do not block the air vents during operation.
• This device is not a toy.

4. Setup

4.1 Powering the Device

The InnoGIO Mini Mesh Nebulizer can be powered in two ways:

1. Batteries: Insert 2 'A' type batteries (not included) into the battery compartment located at the bottom of the device. Ensure correct polarity.
2. USB Power: Connect the provided USB cable to the micro USB port on the device and to a suitable USB power adapter (e.g., phone charger, power bank, computer USB port).

Note: The device can operate on either batteries or USB power. Do not attempt to charge non-rechargeable batteries via the USB port.

Figure 3: Bottom view of the nebulizer, illustrating the battery compartment and micro USB port for power connection.

4.2 Filling the Medication Cup

1. Open the medication cup lid.
2. Carefully pour the prescribed amount of medication into the cup. The cup may have a graduation scale to assist with accurate dosing. Do not overfill.
3. Close the medication cup lid securely.

Figure 4: Side view of the nebulizer, highlighting the clear medication cup where liquid medicine is added.

4.3 Attaching the Accessory

Choose the appropriate accessory (adult mask, child mask, or mouthpiece) and securely attach it to the nebulizer's outlet port.

Figure 5: The nebulizer unit with the adult mask securely attached, ready for use.

Figure 6: The nebulizer unit with the mouthpiece attached, providing an alternative method for inhalation.

5. Operation

1. Ensure the device is powered and the medication cup is filled and sealed.
2. Press the power button (usually a single grey button with a power symbol) to turn on the device. A small indicator light may illuminate.
3. Place the mask over your nose and mouth, or place the mouthpiece in your mouth, ensuring a comfortable and secure fit.
4. Breathe normally through the mask or mouthpiece. You will see a fine mist being produced.
5. Continue inhalation until the medication cup is empty or as directed by your healthcare professional.
6. To turn off the device, press the power button again.
7. After each use, disconnect the accessory and proceed to cleaning.

Figure 7: The nebulizer in operation, clearly showing the fine mist being generated from the medication cup, indicating active nebulization.

Figure 8: A child comfortably using the InnoGIO Mini Mesh Nebulizer with the child-sized mask, demonstrating ease of use for pediatric patients.

6. Maintenance and Cleaning

Proper cleaning after each use is essential to maintain hygiene and ensure the longevity of your nebulizer.

1. Disassembly: Disconnect the mask/mouthpiece and remove the medication cup from the main unit.
2. Cleaning the Medication Cup and Accessories:
   • Rinse the medication cup, mask, and mouthpiece thoroughly under warm running water.
   • For a more thorough cleaning, these parts can be soaked in a mild disinfectant solution (e.g., diluted white vinegar or a medical device disinfectant) for the recommended time, then rinsed again with clean water.
   • Allow all parts to air dry completely before reassembly or storage.
3. Cleaning the Main Unit:
   • Wipe the exterior of the main unit with a soft, damp cloth.
   • Do not immerse the main unit in water.
   • Ensure no liquid enters the power port or battery compartment.
4. Storage: Store the clean, dry nebulizer and its accessories in the provided storage pouch or a clean, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

If the problem persists after trying these solutions, please contact customer support.

8. Specifications

9. Warranty and Support

InnoGIO is committed to customer satisfaction. This product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your packaging or visit our official website.

If you have any questions, require assistance, or need further clarification regarding the use, maintenance, or troubleshooting of your InnoGIO Mini Mesh Nebulizer, please do not hesitate to contact our professional customer support team. Our experienced advisors are ready to assist you.

Contact Information: Please refer to the contact details provided on the product packaging or our official InnoGIO website.