Introduction
This manual provides detailed instructions for the proper setup, operation, and maintenance of your LEXiBOOK Scooby-Doo Digital Alarm Clock (Model RL800SD). Please read this manual thoroughly before using the product to ensure optimal performance and safety.
Figure 1: Front view of the LEXiBOOK Scooby-Doo Digital Alarm Clock.
Safety Information
- Keep the device away from water and moisture.
- Do not expose to direct sunlight or extreme temperatures.
- Use only the specified battery type (3 x AA/LR6).
- Do not mix old and new batteries, or different types of batteries.
- Dispose of batteries responsibly according to local regulations.
- This product is recommended for ages 3 years and up.
Package Contents
- 1 x LEXiBOOK Scooby-Doo Digital Alarm Clock
- 1 x Instruction Manual
Batteries (3 x AA/LR6) are not included and must be purchased separately.
Figure 2: Product packaging showing the alarm clock.
Setup
1. Battery Installation
- Locate the battery compartment on the underside of the alarm clock.
- Open the battery compartment cover.
- Insert 3 x AA/LR6 batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Figure 3: Rear view of the alarm clock, indicating the battery compartment and control buttons.
2. Initial Time Setting
- Press and hold the 'Time Set' button (usually marked with a clock icon) located on the back of the unit. The hour digits will start flashing.
- Use the '+' and '-' buttons on the front to adjust the hour.
- Press the 'Time Set' button again to confirm the hour and move to minute adjustment. The minute digits will flash.
- Use the '+' and '-' buttons to adjust the minutes.
- Press the 'Time Set' button one last time to confirm the minutes and exit time setting mode.
Operating Instructions
1. Setting the Alarm
- Press and hold the 'Alarm Set' button (usually marked with a bell icon) on the back of the unit. The alarm hour digits will start flashing.
- Use the '+' and '-' buttons to adjust the alarm hour.
- Press the 'Alarm Set' button again to confirm the alarm hour and move to alarm minute adjustment. The alarm minute digits will flash.
- Use the '+' and '-' buttons to adjust the alarm minutes.
- Press the 'Alarm Set' button again to select the alarm sound. Use the '+' and '-' buttons to cycle through the available magic-themed alarm sounds.
- Press the 'Alarm Set' button again to adjust the alarm volume. Use the '+' and '-' buttons to set the desired volume level.
- Press the 'Alarm Set' button one last time to confirm settings and exit alarm setting mode. An alarm icon will appear on the display, indicating the alarm is active.
2. Activating the Night Light
- Press down on the Scooby-Doo figure on top of the clock to activate the night light.
- The Scooby-Doo figure will light up for a few minutes, providing a soft glow.
- The LCD screen is backlit for easy readability in low light conditions.
Figure 4: Scooby-Doo figure illuminated as a night light.
3. Snooze Function
- When the alarm sounds, press down on the Scooby-Doo figure or the top of the clock to activate the snooze function. The alarm will pause and sound again after a short interval.
4. Stopping the Alarm
- To completely stop the alarm, press the 'Alarm Set' button on the back of the unit. The alarm icon on the display will disappear.
5. Playing Sound Effects
- Press the dedicated sound effects button (if available, typically marked with a speaker icon) to play various magic sound effects.
Maintenance
- Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace all 3 x AA/LR6 batteries when the low battery indicator appears on the display, or when the clock's functions become erratic.
- Storage: If storing the clock for an extended period, remove the batteries to prevent leakage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is blank or dim. | Batteries are low or incorrectly installed. | Replace batteries with new ones, ensuring correct polarity. |
| Alarm does not sound. | Alarm is not set or volume is too low. | Ensure alarm is activated (alarm icon visible) and volume is adjusted. |
| Night light does not activate. | Batteries are low or the figure is not pressed firmly. | Replace batteries. Press the Scooby-Doo figure firmly. |
Specifications
- Brand: LEXiBOOK
- Model Number: RL800SD
- Display Type: Digital LCD with Backlight
- Power Source: 3 x AA/LR6 Batteries (not included)
- Material: Plastic (Acrylonitrile Butadiene Styrene)
- Product Dimensions: 3.54"W x 7.17"H
- Item Weight: 220 Grams (approx. 7.8 ounces)
- Special Features: Night Light, Snooze Function, Adjustable Alarm Volume, Multiple Alarm Sounds, Low Battery Indicator
- Recommended Age: 3 years and up
Official Product Video
Video 1: Official demonstration of the LEXiBOOK Scooby-Doo Digital Alarm Clock features, including night light and alarm functions.
Warranty and Support
LEXiBOOK products are designed and manufactured to the highest quality standards. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided on the product packaging or visit the official LEXiBOOK website. Please retain your proof of purchase for warranty claims.
For further assistance, you may visit the LEXiBOOK Store on Amazon.
