RYOBI ONE+ 18V Cordless Hybrid LED Panel Light (PCL631B)

Introduction

Thank you for choosing the RYOBI ONE+ 18V Cordless Hybrid LED Panel Light. This manual provides essential information for the safe and efficient operation of your new light. Please read it thoroughly before use and retain it for future reference.

Image: The RYOBI ONE+ 18V Cordless Hybrid LED Panel Light, shown with its main and side LED panels fully extended, highlighting its bright illumination capabilities.

Important Safety Information

WARNING:

• Always wear appropriate personal protective equipment (PPE) when operating power tools and lighting equipment.
• Do not look directly into the LED light source. This can cause temporary or permanent vision damage.
• Keep children and bystanders away while operating the light.
• This product is Not Water Resistant. Avoid exposure to water or damp conditions to prevent electric shock or damage.
• Ensure the battery pack is securely installed or the extension cord is properly connected before use.
• Use only RYOBI ONE+ 18V batteries and compatible chargers.

Package Contents

Your RYOBI ONE+ 18V Cordless Hybrid LED Panel Light package includes:

• 1 x RYOBI ONE+ 18V Cordless Hybrid LED Panel Light (Tool Only)

Note: Battery, charger, and extension cord are sold separately.

Image: A graphic displaying the text "BATTERY & CHARGER SOLD SEPARATELY" in large, green letters, emphasizing that these components are not included with the light.

Image: A graphic displaying the text "EXTENSION CORD SOLD SEPARATELY" in large, orange letters, indicating that an extension cord for hybrid power is not included.

Setup

Powering the Light: Hybrid Operation

The RYOBI ONE+ Hybrid LED Panel Light offers two power options:

1. Using an 18V ONE+ Battery:

   Insert a fully charged RYOBI ONE+ 18V battery into the battery port located on the back of the light. Ensure it clicks securely into place.

   

   Image: A detailed view of the rear of the RYOBI LED Panel Light, showing the slot for an 18V battery and the AC power input for hybrid operation.

2. Using an Extension Cord (AC Power):

   Connect a standard extension cord (sold separately) to the AC power input port on the back of the light. Plug the other end into a suitable power outlet.

Mounting Options

The light can be used freestanding or mounted:

• Freestanding: Place the light on a stable, flat surface. The integrated feet provide stability.
• Tripod Mounting: The base of the light features a standard tripod mounting hole, allowing for secure attachment to compatible tripods (tripod sold separately) for elevated or hands-free lighting.

Operating Instructions

Powering On/Off and Adjusting Brightness

1. Power On: Press the power button located on the top of the light. The light will typically turn on at its highest brightness setting.
2. Adjust Brightness: Press the power button repeatedly to cycle through the three available brightness settings (High, Medium, Low).
3. Power Off: After cycling through all brightness settings, pressing the power button one more time will turn the light off.

Adjusting Light Panels

The RYOBI Hybrid LED Panel Light features adjustable panels for versatile light coverage:

• Main Panel: The large central LED panel can pivot up to 150 degrees, allowing you to direct the primary light source.
• Side Panels: The two smaller side LED panels can rotate 360 degrees independently. This allows for broad area illumination or focused lighting in multiple directions.

Image: The RYOBI LED Panel Light with its side panels angled outwards, demonstrating its ability to provide wide-angle illumination.

Key Features

• High Light Output: Delivers up to 3,000 lumens of bright LED light.
• 360° Light Coverage: Achieved through independently rotating side panels.
• Hybrid Power: Operates with any RYOBI 18V ONE+ battery or a standard extension cord.
• Adjustable Panels: Main panel pivots 150°, side panels rotate 360° for customizable light direction.
• Portable Design: Lightweight with an integrated carrying handle for easy transport.
• Tripod Mountable: Features a standard mounting hole for use with tripods.

Image: The RYOBI LED Panel Light shown in a folded, compact configuration, illustrating its portability and ease of storage.

Maintenance

• Cleaning: Wipe the light with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the light is off and unplugged before cleaning.
• Storage: Store the light in a dry, protected area when not in use. Fold the panels inward to protect the LED surfaces.
• Battery Care: If using battery power, remove the battery when storing the light for extended periods. Store batteries in a cool, dry place.

Troubleshooting

Specifications

Warranty and Support

The RYOBI ONE+ 18V Cordless Hybrid LED Panel Light is backed by the RYOBI 3-Year Manufacturer’s Warranty. For warranty claims, technical support, or service inquiries, please refer to the official RYOBI website or contact their customer service department.

For more information, visit: www.ryobitools.com