Dardoo Advanced Racing Simulator Cockpit - User Manual

1. Safety Information

Please read all safety warnings and instructions carefully before assembling and using the Dardoo Advanced Racing Simulator Cockpit. Failure to follow these instructions may result in injury or damage to the product.

• Ensure all bolts and fasteners are securely tightened before use. Regularly check for loose connections.
• Do not exceed the maximum weight capacity of the seat and frame.
• Keep hands and fingers clear of moving parts during adjustment.
• Assemble on a flat, stable surface to prevent tipping.
• This product is intended for indoor use only.
• Keep children and pets away from the product during assembly and adjustment.

2. Product Overview

The Dardoo Advanced Racing Simulator Cockpit provides a stable and adjustable platform for an immersive racing simulation experience. It features a robust metal frame, an ergonomic seat, and multiple adjustment points for personalized comfort and compatibility with various racing peripherals.

Figure 2.1: Overall view of the Dardoo Advanced Racing Simulator Cockpit.

Key Features:

• Strong & Sturdy Design: Features a flange structure with 4 screws at each joint for enhanced stability and a 50mm round pipe frame for strong load-bearing capacity.
• Ergonomic Racing Seat: Wider dual-rail design, comfortable and breathable faux leather with cotton fill, offering 65-180° adjustability for an authentic racing feel.
• Free Adjustment: Two-stage steering wheel platform with adjustable height and width. Pedal platform and shift lever platform also support personalized angle and position adjustments.
• Wide Compatibility: Designed to fit popular racing steering wheels, pedals, and shifters from brands such as Logitech (G920, G923), Thrustmaster (T300RS, T500RS, TX), and Fanatec. Compatible with direct-drive steering wheels and monitor mounts (sold separately).

3. Package Contents

The Dardoo Advanced Racing Simulator Cockpit is shipped in two separate boxes. Please ensure all components are present before beginning assembly.

Figure 3.1: The product is delivered in two boxes: Box A for the Racing Seat and Box B for the Racing Cockpit Stand.

Included Components:

• Racing Cockpit Frame (Metal)
• Ergonomic Racing Seat (Faux Leather with Cotton Fill)
• Steering Wheel Platform
• Pedal Platform
• Shifter Platform
• Assembly Hardware (screws, bolts, tools)
• Instruction Manual

Note: Electronic devices such as steering wheels, pedals, shifters, and monitor mounts are not included and must be purchased separately.

4. Setup & Assembly

Follow these steps to assemble your Dardoo Advanced Racing Simulator Cockpit. It is recommended to have a second person assist with certain steps.

4.1 Frame Assembly

1. Unpack all components from both boxes and verify against the package contents list.
2. Begin by assembling the main frame components. The flange structure ensures stability; secure each joint with the provided 4 screws.
3. Attach the steering wheel platform to the main frame. Ensure it is securely fastened but allow for initial height and width adjustments.
4. Install the pedal platform at the front of the frame.
5. Attach the shifter platform to the side of the frame. This can be positioned for left or right-hand driving.

Figure 4.1: Illustration of the robust flange structure and 50mm round tube design, ensuring stability and a load-bearing capacity of 400 lbs.

4.2 Seat Installation

The ergonomic racing seat is designed for comfort and adjustability. Refer to the video below for detailed seat installation instructions.

1. Prepare the Seat: Lift the adjusting lever on the seat upwards and pull the slide rail out to expose the mounting points.
2. Install Front Screws: Align the front of the seat with the seat bracket on the cockpit frame. Secure the two front screws.
3. Install Rear Screws: Move the slide rail and seat bracket backwards to expose the rear mounting points. Secure the two rear screws.
4. Ensure all seat mounting screws are tightened for stability.

Figure 4.2: Close-up view of the adjustable seat mechanism, highlighting the slide rails and recline lever.

5. Operating Instructions

The Dardoo Advanced Racing Simulator Cockpit offers extensive adjustability to optimize your racing setup.

5.1 Adjusting the Cockpit

• Steering Wheel Platform: The two-stage platform allows for adjustment of both height and width. Loosen the securing bolts, position the platform to your desired height and width, and then re-tighten all bolts firmly.
• Pedal Platform: The pedal platform can be adjusted for angle (0-30 degrees) to suit your preference. Loosen the adjustment bolts, set the desired angle, and re-tighten.
• Shifter Platform: The shifter platform can be mounted on either the left or right side of the cockpit and its position can be adjusted. Secure it firmly once the desired position is achieved.
• Seat Adjustment:
  • Seat Slide: Use the lever located under the front of the seat to slide the seat forward or backward on its rails. Release the lever to lock the seat in place.
  • Seat Recline: Use the recline lever on the side of the seat to adjust the backrest angle between 65° and 180°.

Figure 5.1: Visual guide to the freely adjustable components: pedal angle (0-30°), steering wheel platform height and width, and seat recline (65-180°). The shifter platform can also be configured for left or right-hand driving.

5.2 Peripheral Compatibility

The cockpit is designed for wide compatibility with major racing peripheral brands.

Figure 5.2: The cockpit is compatible with a wide range of racing peripherals, including steering wheels from Logitech (G27, G29, G920), Thrustmaster (TMX PRO, TX), MOZA, PXN, as well as various shifters and handbrakes.

Mount your steering wheel, pedals, and shifter to their respective platforms using the provided hardware or hardware specific to your peripherals. Ensure all devices are securely attached to prevent movement during use.

6. Maintenance

Regular maintenance will ensure the longevity and safe operation of your racing simulator cockpit.

• Cleaning: Wipe down the metal frame with a damp cloth. For the faux leather seat, use a mild soap solution and a soft cloth, then wipe dry. Avoid harsh chemicals.
• Fastener Check: Periodically inspect all bolts, screws, and connections to ensure they remain tight. Re-tighten any loose fasteners to maintain stability.
• Moving Parts: Ensure that the seat slide rails and adjustment mechanisms operate smoothly. If necessary, apply a small amount of silicone-based lubricant to the slide rails.
• Storage: If storing the cockpit for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

7. Troubleshooting

This section addresses common issues you might encounter with your racing simulator cockpit.

If you encounter issues not listed here or require further assistance, please contact Dardoo customer support.

8. Specifications

• Brand: Dardoo
• Model Name: Sim Rig Cockpit NO.14
• Model Number: racing simulator cockpit NO.14-BLACKSEAT
• Material Type: Metal (Frame), Faux Leather (Seat), Cotton (Fill)
• Color: Sim Cockpit 14+blackseat
• Item Weight: 80.4 Pounds
• Item Dimensions (D x W x H): 23.6"D x 23.6"W x 7.87"H (Note: This seems to be package dimensions, actual assembled dimensions may vary slightly)
• Additional Features: Flange Structure, Multi Position Adjustment, Round Tube Structure (50mm)
• Reclining Position Count: 1 (Adjustable range 65-180°)
• Required Assembly: Yes
• Indoor Outdoor Usage: Indoor
• Age Range Description: Adult

9. Warranty & Support

Manufacturer Warranty: 3 months warranty + permanent online technical support.

For warranty claims, technical assistance, or any questions regarding your Dardoo Advanced Racing Simulator Cockpit, please contact Dardoo customer support through the retailer where the product was purchased or visit the official Dardoo website for contact information.

Please retain your proof of purchase for warranty purposes.