PRIOS 9917019
Contents
PRIOS Aureka LED Ceiling Light
Model: 9917019
Product Overview
The PRIOS Aureka LED Ceiling Light is a versatile lighting solution designed for both recessed and surface mounting. Its timeless round shape and white finish make it suitable for various indoor environments. This multi-functional light features an integrated motion sensor and a DIP switch for adjusting the light color before installation, making it ideal for both private and commercial use.

Image: Front view of the PRIOS Aureka LED Ceiling Light, showcasing its sleek, round design.
Safety Information
Please read these safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other injuries.
- Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- Ensure the power supply is disconnected before installation, maintenance, or cleaning.
- Do not modify the product in any way.
- This product is designed for indoor use only (IP20 protection class).
- Do not expose the product to water or high humidity.
- Keep packaging materials out of reach of children.
Package Contents
Verify that all components are present before beginning installation:
- PRIOS Aureka LED Ceiling Light fixture (with integrated LED light source)
- Mounting hardware (screws, anchors, mounting bracket)
- Instruction Manual (this document)

Image: The PRIOS Aureka LED Ceiling Light and its accompanying mounting hardware.
Setup and Installation
1. Pre-Installation Considerations
Before installation, determine whether you will be surface mounting or recessing the light. Ensure the chosen location has adequate space and a stable surface for mounting.

Image: Dimensions of the light fixture: 330mm diameter and 19mm height.

Image: Recessed depth required for installation: 42mm.
2. Adjusting Light Color (DIP Switch)
The Aureka ceiling light features a DIP switch that allows you to select the desired light color (color temperature) before installation. This switch is located on the back of the fixture. Choose between warm white, neutral white, or cool white settings according to your preference.

Image: Detail of the DIP switch on the back of the light fixture, used to select color temperature.
Note: This adjustment must be made before the light is fully installed and connected to power.
3. Mounting the Fixture
- Turn off the main power supply at the circuit breaker.
- Mark the drilling points on the ceiling according to the mounting bracket.
- Drill holes and insert appropriate wall anchors if necessary.
- Secure the mounting bracket to the ceiling using the provided screws.
- Connect the electrical wires (Live, Neutral, Earth) from the ceiling to the corresponding terminals on the light fixture. Ensure connections are secure.
- Attach the light fixture to the mounting bracket, ensuring it is firmly secured.
- Restore power supply and test the light.
Operating Instructions
Motion Sensor Functionality
The PRIOS Aureka LED Ceiling Light is equipped with an intelligent, integrated motion sensor. This sensor detects movement within its range and automatically switches the light ON. After a period of no detected movement, the light will automatically switch OFF.
- Detection Range: Approximately 4-6 meters.
- Illumination Duration: The light remains on for approximately 40 seconds after the last detected movement.
Note: The motion sensor is designed to save energy by ensuring the light is only active when needed.


Image: The ceiling light in operation, demonstrating its illumination in various settings.
Light Color Adjustment (Pre-Installation)
As mentioned in the setup section, the light color is set via a DIP switch before installation. Once installed, the light will operate at the selected color temperature.

Image: Visual representation of the different light color options available (warm, neutral, cool white).
Maintenance
The PRIOS Aureka LED Ceiling Light requires minimal maintenance.
- Cleaning: Disconnect power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface. Do not use abrasive cleaners or solvents.
- LED Light Source: The LED light source is integrated and not user-replaceable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; faulty fixture. | Check circuit breaker. Ensure wiring connections are secure. If problem persists, contact a qualified electrician. |
| Motion sensor not detecting movement. | Sensor obstructed; incorrect placement; environmental factors. | Ensure sensor lens is clean and unobstructed. Verify placement is within optimal range (4-6m). Avoid placing near heat sources or strong air currents. |
| Light stays on continuously. | Constant movement in detection area; sensor malfunction. | Ensure no continuous movement is within the sensor's range. If the area is clear and the light remains on, contact support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | PRIOS |
| Model Number | 9917019 |
| Product Dimensions | 33 x 33 x 1.9 cm (Diameter x Diameter x Height) |
| Item Weight | 722 grams |
| Material | Aluminium, Polycarbonate (PC) |
| Color | White / Opal |
| Style | Modern |
| Light Source Type | Integrated LED |
| Power Consumption | 30 Watt |
| Luminous Flux | 2700 lm |
| Color Temperature | Adjustable (via DIP switch) |
| Color Rendering Index (CRI) | 80.00 |
| Voltage | 230 Volt |
| Protection Class (IP) | IP20 |
| Electrical Protection Class | II |
| Special Features | Energy efficient, Motion sensor |
| Application Area | Indoor (Living/Dining room, Hallway, Kitchen) |
| Recessed Depth | 4.2 cm |


Image: Energy efficiency label (Class F) and detailed product fiche.
Recycling and Disposal
This product contains electronic components and an integrated LED light source. It should not be disposed of with general household waste.
- Recycling: Please dispose of this product at designated collection points for electrical and electronic equipment. This helps protect the environment and human health.
- Disposal of Broken or Damaged Lamps: Handle broken lamps with care. Avoid direct contact with broken parts. Dispose of them safely at appropriate recycling facilities.
- For more information on the energy efficiency of this product, you can refer to the EPREL database: https://eprel.ec.europa.eu/qr/745130
Warranty and Support
PRIOS products are manufactured to high-quality standards. For information regarding warranty terms, technical support, or service inquiries, please refer to the purchase documentation or contact your retailer. You may also visit the official PRIOS website for further assistance.
Manufacturer: PRIOS
Contact: Refer to your point of purchase or the manufacturer's official website for support channels.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.