1. Introduction
Thank you for choosing the AEG AZE159 Ultimate Power Mop Nozzle. This accessory is designed to enhance your cleaning experience by providing efficient wet cleaning for hard floors when used with compatible AEG 8000 series cordless vacuum cleaners. Please read this manual thoroughly before initial use to ensure proper setup, operation, and maintenance.
2. Safety Information
- Always ensure the mop nozzle is correctly attached to the vacuum cleaner before operation.
- Do not immerse the mop nozzle in water. Clean only as instructed in the maintenance section.
- Use only clean water or recommended cleaning agents in the spray bottle. Avoid corrosive or flammable liquids.
- Keep hands and loose clothing away from rotating parts during operation.
- Disconnect the mop nozzle from the vacuum cleaner before performing any maintenance or cleaning tasks.
- This product is intended for indoor household use only.
3. Package Contents
Verify that all items are present in your package:
- 1 x AEG UltimatePower Mop Nozzle
- 2 x Standard Cleaning Pads
- 1 x Spray Bottle
4. Setup Instructions
- Attach Cleaning Pads: Securely attach the two standard cleaning pads to the underside of the mop nozzle. Ensure they are centered and firmly in place. The pads are designed for easy removal and attachment with a loop.
- Fill Spray Bottle: Open the spray bottle and fill it with clean water. You may add a small amount of compatible floor cleaning agent if desired. Do not overfill.
- Attach Spray Bottle: Mount the filled spray bottle onto the hand part of your AEG 8000 cordless vacuum cleaner. Ensure it is securely fastened.
- Connect Mop Nozzle: Attach the UltimatePower mop nozzle to the main body of your AEG 8000 cordless vacuum cleaner. Ensure a firm connection.
Image 4.1: The AEG Ultimate Power Mop Nozzle with cleaning pads attached.
Image 4.2: Close-up of the two standard cleaning pads.
Image 4.3: The spray bottle designed to attach to the vacuum's hand part.
5. Operation
- Power On: Turn on your AEG 8000 cordless vacuum cleaner. The mop nozzle's rotating pads will begin to spin.
- Spray Function: To dispense water or cleaning solution, manually press the trigger on the spray bottle. Dose the amount of liquid as needed for the cleaning task.
- Cleaning: Guide the mop nozzle across your hard floors. The rotating pads will effectively remove dirt and grime. The integrated LED lights will illuminate the cleaning path, making dust and debris visible even in dimly lit areas or under furniture.
- Maneuvering: The low profile (6.2 cm height) of the mop nozzle allows it to reach under furniture and into tight spaces for thorough cleaning.
- Power Off: Once cleaning is complete, turn off your vacuum cleaner.
Image 5.1: Demonstrating the use of the mop nozzle with the vacuum.
Image 5.2: The mop nozzle in action, highlighting the LED lights.
Image 5.3: The rotating pads effectively cleaning a spill.
6. Maintenance
- Cleaning Pads: After each use, remove the cleaning pads from the mop nozzle. The pads are machine washable for easy cleaning. Allow them to air dry completely before reattaching or storing.
- Spray Bottle: Empty any remaining liquid from the spray bottle after use. Rinse the bottle with clean water to prevent residue buildup.
- Mop Nozzle Body: Wipe the exterior of the mop nozzle with a damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Storage: Store the mop nozzle and accessories in a clean, dry place. Ensure the spray bottle is empty before storage. Note: The spray bottle may need to be removed from the vacuum for charging station compatibility.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water is dispensed from the spray bottle. | Spray bottle is empty or clogged. | Refill the spray bottle. Check the nozzle for any blockages and clear if necessary. Ensure the bottle is correctly attached. |
| Mop nozzle not cleaning effectively. | Pads are dirty or worn. Insufficient pressure applied. | Clean or replace the cleaning pads. Apply gentle downward pressure on the vacuum cleaner during operation to enhance cleaning performance. |
| Mop nozzle not rotating. | Not properly connected to the vacuum. Obstruction. | Ensure the mop nozzle is securely attached to the vacuum cleaner. Check for any debris obstructing the rotating mechanism. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | AEG |
| Model Name | AZE159 |
| Color | Black |
| Product Dimensions (L x W x H) | 12.2" x 12.99" x 2.76" |
| Item Weight | 2.75 pounds |
| Special Feature | Lightweight, LED lights |
| Included Components | Mop Nozzle, 2 Standard Pads, Spray Bottle |
| Recommended Use | Hard bottom floors |
9. Warranty and Support
This AEG product comes with a standard manufacturer's warranty. For detailed warranty information, service, or support, please refer to the documentation included with your AEG 8000 cordless vacuum cleaner or visit the official AEG website. Keep your proof of purchase for warranty claims.
For further assistance, you may contact AEG customer support through their official channels. Please have your model number (AZE159) ready when contacting support.
