1. Product Overview
The Ideal Lux Plisse' SP1 D35 is a modern suspension light designed for indoor use. It features a distinctive pleated glass diffuser and a chrome-plated metal frame, providing elegant and diffused illumination.
This image shows the Ideal Lux Plisse' SP1 D35 suspension light. It features a distinctive white blown glass diffuser with a pleated, ribbed texture, suspended by thin cables and a transparent electrical cord. The top of the diffuser is accented with a chrome-plated metal mount.
2. Safety Information
- Always disconnect power at the main circuit breaker before installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician to ensure compliance with local electrical codes and safety standards.
- Do not exceed the maximum wattage specified for the bulb (E27 max 60W).
- Ensure all connections are secure and properly insulated.
- This product is designed for indoor use only.
3. Setup and Installation
3.1 Components Included
- Metal plated frame (chrome finish)
- Blown white acid glass diffuser with embossed decoration
- Transparent PVC electrical cable
- Mounting hardware (may vary)
Note: An E27 bulb (max 60W) is required and not included with the product.
3.2 Installation Steps
- Prepare for Installation: Ensure power is disconnected at the circuit breaker. Clear the installation area.
- Mount the Fixture: Securely attach the mounting bracket to the ceiling junction box using appropriate hardware.
- Wire the Fixture: Connect the electrical wires from the fixture to the corresponding wires in the junction box (live to live, neutral to neutral, ground to ground). Use wire nuts to secure connections.
- Attach the Canopy: Carefully push the canopy up to the ceiling, covering the junction box, and secure it with the provided screws or fasteners.
- Install the Diffuser: Attach the glass diffuser to the metal frame according to the specific design. Ensure it is securely fastened.
- Insert the Bulb: Screw an E27 bulb (max 60W) into the lamp holder.
- Restore Power: Once installation is complete and all components are secure, restore power at the circuit breaker.
Consult a qualified electrician if you are unsure about any step of the installation process.
4. Operating Instructions
Once properly installed and powered, the Ideal Lux Plisse' SP1 D35 suspension light operates via a standard wall switch connected to its electrical circuit. Simply toggle the switch to turn the light on or off.
5. Maintenance and Care
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the chrome-plated metal parts. For the glass diffuser, use a soft, damp cloth with a mild glass cleaner if necessary, then dry thoroughly. Avoid abrasive cleaners or solvents.
- Bulb Replacement: Ensure power is disconnected. Allow the old bulb to cool completely before unscrewing it. Replace with a new E27 bulb, ensuring it does not exceed 60W.
- Inspection: Periodically check the suspension cables and electrical connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check the circuit breaker and wall switch. Ensure power is restored. |
| Light bulb is faulty. | Replace the E27 bulb. Ensure it is screwed in correctly. | |
| Loose wiring connection. | (Disconnect power first) Check all wire connections. If unsure, consult a qualified electrician. | |
| Light flickers. | Loose bulb or faulty bulb. | Tighten or replace the E27 bulb. |
| Incorrect bulb type/wattage. | Ensure an E27 bulb is used and does not exceed 60W. |
7. Specifications
| Brand | Ideal Lux |
| Model Number | IDL285184 |
| Product Dimensions (L x W x H) | 35 x 35 x 238 cm (max height) |
| Minimum Height | 48 cm |
| Diameter | 35 cm |
| Item Weight | 2.06 Kilograms |
| Style | Modern |
| Color (Diffuser) | White |
| Finish (Frame) | Chrome |
| Material | Glass, Metal |
| Number of Bulbs | 1 |
| Bulb Type | E27 |
| Max Wattage | 60 Watts |
| Power Source | Corded Electric |
| Indoor/Outdoor Use | Indoor |
8. Warranty and Support
For warranty information, spare parts, or technical support, please contact your retailer or the manufacturer, Ideal Lux, directly. Please have your model number (IDL285184) and purchase details available when contacting support.
Information regarding spare parts availability is not explicitly provided in the product details.