Instruction Manual

1. Introduction

Thank you for purchasing the Soundmaster SCD7800SW Boombox. This versatile audio system combines modern digital radio (DAB+) with traditional FM radio, a CD player, MP3 playback via USB, and a classic cassette recorder. It also features an alarm clock and a convenient audio book function. Please read this manual carefully before operating the unit to ensure proper use and to maximize its performance.

Figure 1: Soundmaster SCD7800SW Boombox

2. Safety Instructions

To ensure safe operation and prevent damage, please observe the following safety precautions:

• Do not expose this appliance to dripping or splashing water.
• Do not place objects filled with liquids, such as vases, on the appliance.
• Ensure proper ventilation. Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the appliance.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this appliance during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way.

3. Package Contents

Please check that all items are present and in good condition:

• Soundmaster SCD7800SW Boombox
• Mains Adapter
• Instruction Manual

4. Product Features

• DAB+ and FM PLL radio with 30 presets each
• CD, CD-R/RW, CD-MP3 playback
• CD repeat function
• CD shuffle function (random function)
• Cassette recorder for playback and recording
• USB port for MP3 playback and recording from radio/USB to cassette
• Audio Book Function (RESUME) for CD playback
• Dot matrix LCD display
• Headphone jack
• 2 adjustable alarm times with wake-up options (CD, radio, USB, signal tone)
• Snooze function
• Mains or battery operated (batteries not included)

5. Controls and Connections

Front and Top Panel Overview

Figure 2: Front and Top Panel

• SCAN/MODE Button: Switches between DAB+, FM, CD, USB, and Cassette modes. Initiates station scan in radio mode.
• POWER Button: Turns the unit on/off.
• PRE +/- Buttons: Navigates through preset radio stations.
• PLAY/PAUSE Button: Controls playback for CD, USB, and Cassette.
• STOP Button: Stops playback.
• SKIP/SEARCH Buttons: Skips tracks/files or fast forwards/rewinds.
• VOL +/- / AL1 / AL2 Buttons: Adjusts volume. Press and hold to set Alarm 1 or Alarm 2.
• INFO/SNOOZE Button: Displays additional information in radio mode. Activates snooze during alarm.
• CLOCK/ENT Button: Sets clock and confirms selections.
• MENU Button: Accesses menu options.
• LCD Display: Shows current mode, track information, radio station, time, etc.
• CD Compartment: For inserting CDs.
• Cassette Compartment: For inserting audio cassettes.

Rear Panel Overview

Figure 3: Rear Panel

• AC Power Input (AC: 230V~50Hz): Connects the included mains adapter.
• USB Port: For connecting USB flash drives for MP3 playback or recording.
• Headphone Jack: For connecting headphones (3.5mm).
• Telescopic Antenna: Extend for optimal radio reception.

6. Setup

Power Connection

The SCD7800SW can be powered by the included mains adapter or by batteries.

• Mains Operation: Connect the mains adapter to the AC power input on the rear of the unit and plug the other end into a standard wall outlet (AC 230V~50Hz).
• Battery Operation: Open the battery compartment on the bottom of the unit. Insert 6 x UM-2/C 1.5V batteries (not included), ensuring correct polarity. Close the compartment securely.

Antenna

For optimal radio reception, fully extend the telescopic antenna located on the rear of the unit. Adjust its position for the best signal quality.

7. Operating Instructions

General Operation

• Power On/Off: Press the POWER button to turn the unit on or off.
• Mode Selection: Press the SCAN/MODE button repeatedly to cycle through DAB+, FM, CD, USB, and Cassette modes.
• Volume Adjustment: Use the VOL +/- buttons to adjust the listening volume.

DAB+ Radio Operation

1. Switch to DAB+ mode using the SCAN/MODE button.
2. The unit will automatically scan for available DAB+ stations on first use. To initiate a manual scan, press and hold the SCAN/MODE button.
3. Use the SKIP/SEARCH buttons to navigate through the list of available stations.
4. To save a station as a preset, press and hold the PRE +/- button until the display shows a preset number. Use SKIP/SEARCH to select the desired preset number, then press CLOCK/ENT to confirm.
5. To recall a preset, briefly press the PRE +/- button.
6. Press INFO/SNOOZE to cycle through station information (e.g., program type, signal strength).

FM Radio Operation

1. Switch to FM mode using the SCAN/MODE button.
2. To auto-scan and save stations, press and hold the SCAN/MODE button. The unit will scan and save strong stations automatically.
3. To manually tune, briefly press the SKIP/SEARCH buttons to fine-tune the frequency. Press and hold SKIP/SEARCH to auto-scan to the next strong station.
4. Saving and recalling presets works the same as in DAB+ mode.

CD/MP3 Playback

1. Open the CD compartment and insert a CD with the label side facing up. Close the compartment.
2. Switch to CD mode using the SCAN/MODE button. The unit will read the disc.
3. Press PLAY/PAUSE to start or pause playback.
4. Press STOP to stop playback.
5. Use the SKIP/SEARCH buttons to skip to the next/previous track. Press and hold to fast forward/rewind within a track.
6. Repeat Function: Press the REPEAT button (if available, or cycle through menu options) to repeat the current track, all tracks, or a specific folder (for MP3 CDs).
7. Shuffle Function: Press the SHUFFLE button (if available, or cycle through menu options) to play tracks in a random order.

Cassette Recording/Playback

1. Open the cassette compartment and insert a cassette.
2. Switch to Cassette mode using the SCAN/MODE button.
3. Playback: Press the PLAY button on the cassette deck controls to start playback.
4. Recording: To record from radio or USB, first select the desired source (DAB+, FM, or USB). Insert a blank cassette. Press the RECORD button on the cassette deck. The unit will begin recording the audio from the selected source. Press STOP to end recording.

USB Playback

1. Insert a USB flash drive containing MP3 files into the USB port on the rear.
2. Switch to USB mode using the SCAN/MODE button. The unit will read the files.
3. Playback controls (PLAY/PAUSE, STOP, SKIP/SEARCH) function similarly to CD playback.

Alarm Clock Function

1. Ensure the clock is set correctly. Press and hold CLOCK/ENT to enter clock setting mode. Use SKIP/SEARCH to adjust time and CLOCK/ENT to confirm.
2. To set Alarm 1 or Alarm 2, press and hold VOL +/- / AL1 / AL2 until the alarm setting appears.
3. Use SKIP/SEARCH to set the alarm time and CLOCK/ENT to confirm.
4. Select the alarm source (CD, Radio, USB, or Signal Tone) using SKIP/SEARCH and confirm with CLOCK/ENT.
5. To activate/deactivate an alarm, briefly press the corresponding AL1 or AL2 button. An alarm icon will appear on the display when active.
6. When the alarm sounds, press INFO/SNOOZE to activate snooze (alarm will sound again after a few minutes) or press POWER to turn off the alarm.

Audio Book Function (RESUME)

The Audio Book Function (RESUME) allows the CD player to automatically resume playback from the last stopped position. This feature must be activated in the system settings or by a specific button if available. Consult the on-screen menu or specific button functions for activation. Once activated, the CD will always start from where it was last stopped, even after powering off the unit.

8. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the unit. For stubborn stains, a slightly damp cloth may be used, followed by a dry cloth. Do not use abrasive cleaners or solvents.
• CD Lens Care: Do not touch the CD lens. If the lens is dirty, use a commercially available CD lens cleaner.
• Cassette Head Cleaning: Periodically clean the cassette heads and pinch rollers with a cotton swab lightly dampened with isopropyl alcohol to ensure optimal sound quality and prevent tape damage.
• Storage: When not in use for extended periods, disconnect the power adapter and remove batteries. Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.

9. Troubleshooting

10. Specifications

11. Warranty and Support

Soundmaster products are designed and manufactured to the highest quality standards. For information regarding warranty coverage and technical support, please refer to the warranty card included with your product or visit the official Soundmaster website. Keep your purchase receipt as proof of purchase for any warranty claims.