Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your Morris 37291 Weatherproof Toggle Switch Cover. Please read these instructions thoroughly before beginning installation or use, and retain this manual for future reference.
Safety Information
Always prioritize safety when working with electrical components. Failure to follow these instructions may result in electric shock, fire, or property damage.
- Disconnect Power: Always turn off power at the circuit breaker or fuse box before installing, removing, or servicing the switch cover. Verify power is off using a voltage tester.
- Qualified Installation: If you are unsure about any part of the installation process, consult a qualified electrician.
- Intended Use: This product is designed for use with standard toggle switches in two-gang configurations and is cULus Listed for safety.
- Environmental Conditions: Ensure the product is used within its specified environmental conditions, particularly for wet locations as indicated.
Package Contents
Verify that all components are present before beginning installation:
- Morris 37291 Weatherproof Toggle Switch Cover (2-gang, 2-toggle)
- Pre-installed Gasket
- Mounting Screws
Product Features
The Morris 37291 Weatherproof Toggle Switch Cover is engineered for durability and reliable performance in demanding environments:
- Durable Construction: Made from seamless die-cast aluminum, ensuring long-lasting performance.
- Weatherproof Design: Features a powder coat finish and pre-installed gasket for protection against the elements, suitable for wet locations.
- Two-Gang Configuration: Designed to accommodate two standard toggle switches.
- Easy Installation: Includes all necessary mounting screws for a straightforward screw-in installation.
- Safety Certified: cULus Listed for compliance with safety standards.
Image of the Morris 37291 Weatherproof Toggle Switch Cover. It features a durable grey die-cast aluminum plate with two toggle switches. Each switch has 'ON' and 'OFF' indicators. The cover is designed for two-gang configurations and includes pre-drilled holes for mounting.
Setup and Installation
Follow these steps for proper installation of your weatherproof toggle switch cover:
- Turn Off Power: Locate the circuit breaker or fuse that controls the power to the switch you are working on. Turn it OFF. Verify that the power is off using a non-contact voltage tester.
- Remove Existing Cover (if applicable): Carefully unscrew and remove any existing switch cover plate.
- Position the New Cover: Place the Morris 37291 Weatherproof Toggle Switch Cover over the electrical box, ensuring the pre-installed gasket is properly seated against the mounting surface. Align the toggle switches with the openings in the cover.
- Secure the Cover: Use the provided mounting screws to firmly attach the cover to the electrical box. Do not overtighten, as this can damage the cover or the electrical box.
- Restore Power: Once the cover is securely installed, return to the circuit breaker or fuse box and turn the power back ON.
Operating Instructions
The Morris 37291 Weatherproof Toggle Switch Cover allows for standard operation of your toggle switches:
- To turn the connected device or light ON, flip the toggle switch upwards.
- To turn the connected device or light OFF, flip the toggle switch downwards.
Maintenance
Regular maintenance will help prolong the life and effectiveness of your switch cover:
- Cleaning: Wipe the surface of the cover with a soft, damp cloth to remove dirt and debris. Avoid using abrasive cleaners or solvents, as these can damage the finish.
- Inspection: Periodically inspect the cover for any signs of wear, cracks, or damage, especially if exposed to harsh weather conditions. Ensure the gasket remains intact and properly sealed.
- Screw Tightness: Occasionally check that the mounting screws are still tight. Do not overtighten.
Troubleshooting
If you encounter issues with your Morris 37291 Weatherproof Toggle Switch Cover, consider the following:
- Cover Does Not Fit: Double-check that your electrical box and toggle switches are standard two-gang configurations. Ensure no wires are obstructing the cover's seating.
- Water Ingress: If water is getting behind the cover, ensure the gasket is properly seated and undamaged. Verify that the mounting screws are tightened sufficiently to create a seal.
- Damaged Cover: If the cover is cracked or significantly damaged, it should be replaced immediately to maintain its weatherproof integrity and safety.
For issues not covered here, please contact Morris Products customer support.
Specifications
| Attribute | Specification |
|---|---|
| Model Number | 37291 |
| Brand | Morris |
| Switch Type | Toggle |
| Configuration | 2-gang, 2-toggle |
| Material | Die Cast Aluminum (Cover), Nylon (Toggle) |
| Finish Type | Powder Coat |
| Color | White (as per product data, image shows grey) |
| Installation Type | Screw-In |
| Item Weight | 5 pounds |
| Product Dimensions | 4 x 6 x 12 inches |
| Certifications | cULus Listed |
Warranty and Support
For information regarding the product warranty, please refer to the documentation provided at the time of purchase or contact Morris Products directly. Support for this product can be obtained by contacting the seller or the manufacturer's customer service department.
Morris Products Contact Information: Please visit the official Morris Products website or refer to your purchase documentation for the most current contact details.
