1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Empava 59-Inch Freestanding Whirlpool Bathtub. Please read all instructions thoroughly before installation and use to ensure proper function and safety.
The Empava 59-inch freestanding whirlpool bathtub is designed for relaxation and hydrotherapy. It features 8 hydromassage nozzles for targeted massage and a boat-shaped design for comfort. This product is ETL certified, ensuring high quality and safety standards.
2. Safety Information
WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
WARNING: Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
WARNING: Never drop or insert any object into any opening.
WARNING: Do not operate this product without the suction cover installed. The suction cover is designed to prevent hair and small body parts from being drawn into the pump.
WARNING: The water in a bathtub should never exceed 104°F (40°C). Water temperatures between 100°F (38°C) and 104°F (40°C) are considered safe for a healthy adult. Lower water temperatures are recommended for young children and when water use exceeds 10 minutes.
WARNING: Consult a physician before use if you are pregnant, diabetic, in poor health, or under medical care.
WARNING: Persons with a medical history of heart disease, low or high blood pressure, circulatory system problems, or diabetes should consult a physician before using a whirlpool tub.
WARNING: Never use electrical appliances in or near the tub.
WARNING: Ensure proper electrical grounding and circuit protection as per local codes. The motor is UL Certified and the tub is ETL Certified.
3. Package Contents
Your Empava 59-Inch Freestanding Whirlpool Bathtub package includes the following pre-installed components:
- Freestanding Bathtub
- Drain assembly
- Faucet
- Showerhead
- Overflow assembly
- Control knobs
- Hydromassage jets (8 total)
- Headrest (removable)
Image: The Empava 59-inch freestanding whirlpool bathtub, showcasing its design and integrated fixtures.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | 59AIS11 |
| Product Dimensions (L x W x H) | 59.06" L x 28.35" W x 30.71" H |
| Basin Interior Size (L x W x H) | 35.44" L x 19.68" W x 16.92" H |
| Water Capacity | 45 Gallons |
| Voltage | 110-Volt |
| Power | 560-Watts |
| Material | Acrylic, Stainless Steel |
| Color | White |
| Installation Type | Freestanding |
| Certifications | ETL Certified, UL Certified Motor |
Refer to the dimension diagrams for detailed measurements:
Image: Top-down view of the bathtub with key dimensions for the basin interior.
Image: Front view of the bathtub with overall length and height dimensions.
5. Installation
Installation should be performed by a qualified professional in accordance with all local plumbing and electrical codes. The bathtub accessories are pre-drilled and pre-installed for convenience.
5.1 Site Preparation
- Ensure the floor can support the weight of the tub filled with water and a bather.
- Verify that the installation area has adequate space for the tub's dimensions (59.06" L x 28.35" W x 30.71" H).
- Confirm access to hot and cold water lines and a suitable drain connection.
- Ensure a dedicated 110-Volt electrical outlet is available for the whirlpool pump, protected by a Ground Fault Circuit Interrupter (GFCI).
5.2 Plumbing Connections
- Connect the hot and cold water supply lines to the pre-installed faucet.
- Connect the tub's drain assembly to the floor drain. Ensure all connections are watertight.
- The overflow drain is integrated into the tub design to prevent overfilling.
5.3 Electrical Connections
- Connect the whirlpool pump to a properly grounded 110-Volt GFCI-protected outlet.
- All electrical work must comply with local codes and standards.
5.4 Final Placement
- Carefully position the freestanding tub in its desired location.
- Ensure the tub is level to allow for proper drainage.
Image: The freestanding bathtub positioned in a bathroom, highlighting its design.
6. Setup and Initial Test
Before first use, perform the following steps:
- Fill the tub with cold water to just above the highest jets.
- Inspect all plumbing connections for leaks.
- Turn on the whirlpool pump using the control knob. Allow it to run for 5-10 minutes.
- Check for any unusual noises or vibrations from the pump.
- Drain the tub and check for proper drainage.
- If any issues are observed, refer to the Troubleshooting section or contact customer support.
Video: Demonstration of the Empava 59-inch freestanding whirlpool tub in operation, showcasing the jets and overall design.
7. Operating Instructions
7.1 Filling the Tub
- Ensure the drain stopper is closed by pressing the center of the drain.
- Turn on the hot and cold water using the faucet control knobs to achieve the desired water temperature.
- Fill the tub until the water level is above the highest jets. Do not overfill.
7.2 Activating Hydromassage Jets
- Once the tub is filled, press the power button (usually a small button near the faucet controls) to activate the hydromassage pump.
- Adjust the intensity or direction of the jets if applicable (refer to specific knob functions).
Image: The whirlpool jets in action, creating a bubbling effect in the water.
Video: Detailed view of the adjustable jets and controls of the Empava freestanding whirlpool bathtub.
7.3 Using the Handheld Showerhead
- The handheld showerhead can be used for rinsing or targeted washing.
- Activate the showerhead by turning the appropriate diverter knob on the faucet assembly.
Image: A user demonstrating the handheld showerhead feature of the tub.
7.4 Draining the Tub
- After use, turn off the hydromassage pump.
- Press the center of the drain stopper to open it and allow the water to drain completely.
8. Maintenance
8.1 Cleaning the Tub
- Clean the acrylic surface with a soft cloth and a non-abrasive, mild bathroom cleaner.
- Avoid using harsh chemicals, abrasive pads, or solvents, as these can damage the finish.
- For stubborn stains, a diluted solution of white vinegar and water can be used.
- Rinse thoroughly after cleaning.
8.2 Cleaning the Jets and Plumbing System
- Periodically fill the tub with warm water and add a small amount of whirlpool system cleaner or a cup of white vinegar.
- Run the jets for 10-15 minutes to circulate the cleaning solution through the system.
- Drain the tub and refill with clean water. Run the jets again for a few minutes to rinse.
8.3 Faucet and Showerhead Care
- Wipe chrome surfaces with a soft, damp cloth to prevent water spots and maintain shine.
- Avoid abrasive cleaners that can scratch the chrome finish.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jets not working | No power; water level too low; pump issue. | Check GFCI breaker; ensure water is above jets; contact support if pump fails. |
| Water not draining | Drain stopper closed; obstruction in drain. | Press drain stopper to open; clear any obstructions. |
| Leaks around connections | Loose plumbing connections. | Tighten connections; apply plumber's tape if necessary. Consult a professional. |
| Low jet pressure | Clogged jets; air in pump. | Clean jets; run pump with water to purge air. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Empava customer support.
10. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Empava website. Empava products typically come with a manufacturer's warranty covering defects in materials and workmanship.
Customer Support: For assistance, please contact Empava Appliances Inc. directly. Contact details can usually be found on their official website or on your purchase receipt.
Returns: This product is returnable until Jan 31, 2026 (as per purchase information). Please check your specific return policy with the retailer.
