Dell S2721HS 27-inch Full HD IPS Monitor Instruction Manual

1. Product Overview

The Dell S2721HS is a 27-inch Full HD (1920 x 1080p) IPS LED LCD monitor designed for an optimal viewing experience. It features a 75Hz refresh rate and 4ms Grey-to-Grey response time, enhanced with AMD FreeSync technology for smooth visuals. The monitor incorporates a thin bezel design, an LED edge light system, and a 99% sRGB color gamut for vibrant and consistent colors. ComfortView technology and a flicker-free screen reduce harmful blue light emissions and eye strain, making it suitable for extended use.

Figure 1: Front view of the Dell S2721HS monitor.

2. Setup

2.1. Unboxing and Package Contents

Carefully remove all components from the packaging. Ensure the following items are present:

• Monitor panel
• Stand riser
• Stand base
• Power cable
• HDMI cable
• Quick setup guide
• Safety / Environmental / Regulatory Information

2.2. Assembling the Stand

1. Attach the stand base to the stand riser. Secure it with the captive screw.
2. Align the assembled stand with the mounting slots on the back of the monitor panel.
3. Gently push the stand until it clicks into place.

Figure 2: Stand components and assembly points.

2.3. Connecting the Monitor

1. Connect the power cable to the monitor's power port and then to a wall outlet.
2. Connect one end of the HDMI cable to the HDMI port on your computer or device.
3. Connect the other end of the HDMI cable to one of the HDMI ports (HDMI 1 or HDMI 2) on the back of the monitor.
4. If using DisplayPort (DP), connect a DP cable from your device to the DP port on the monitor (DP cable not included).

Figure 3: Rear view with connectivity ports.

3. Operating the Monitor

3.1. Power On/Off

Press the power button located on the bottom right side of the monitor to turn it on or off. The power LED will indicate the monitor's status.

3.2. On-Screen Display (OSD) Menu

Use the buttons on the bottom right of the monitor to navigate the On-Screen Display (OSD) menu. This menu allows you to adjust various settings such as brightness, contrast, color modes, input source, and more.

3.3. Adjusting Display Settings

• Resolution: The native resolution is 1920 x 1080p. Ensure your computer's display settings match this for optimal clarity.
• Refresh Rate: The monitor supports up to 75Hz. Adjust this in your computer's display settings for smoother motion.
• ComfortView: This feature reduces blue light emissions to minimize eye strain. It can be enabled or adjusted via the OSD menu.
• AMD FreeSync: For compatible graphics cards, enable AMD FreeSync in your graphics card settings to eliminate screen tearing and stuttering during gaming.

3.4. Physical Adjustments

The monitor stand allows for various ergonomic adjustments:

• Height Adjustment: Raise or lower the monitor to your preferred viewing height.
• Tilt: Tilt the screen forwards or backwards to find the most comfortable viewing angle.
• Swivel: Rotate the monitor left or right on its base.
• Pivot: Rotate the screen 90 degrees to switch between landscape and portrait orientation.

Figure 4: Monitor tilt adjustment.

Figure 5: Monitor height adjustment.

Figure 6: Monitor pivot function.

4. Maintenance

4.1. Cleaning the Monitor

To clean the monitor screen, gently wipe it with a soft, lint-free cloth. For stubborn marks, dampen the cloth with a small amount of water or a mild, non-abrasive screen cleaner. Avoid using harsh chemicals or abrasive materials. Clean the exterior surfaces with a soft, dry cloth.

5. Troubleshooting

• No Display: Ensure the power cable is securely connected to both the monitor and the power outlet. Verify that the video cable (HDMI/DP) is firmly connected to both the monitor and your computer. Check if the correct input source is selected in the OSD menu.
• Flickering Screen: Ensure the video cable is properly connected. Adjust the refresh rate in your computer's display settings.
• Image Quality Issues: Adjust brightness, contrast, and color settings via the OSD menu. Ensure the monitor is set to its native resolution (1920 x 1080p).
• No Sound (if using monitor speakers): Check the volume settings on both the monitor and your computer. Ensure the audio output is correctly routed to the monitor.

6. Specifications

Figure 7: Monitor dimensions.

7. Warranty and Support

The Dell S2721HS monitor comes with a 1 Year Advanced Exchange Service and Premium Panel Exchange. This means if you find even one bright pixel, Dell will provide a free monitor exchange during the limited hardware warranty period. For further support, refer to the included Quick Setup Guide or visit the official Dell support website.

8. Product Video Overview

Watch this official video from Dell Marketing USA, LP for a visual overview of the Dell S2721HS monitor's design, features, and connectivity options.