Positive Grid Spark Control Foot Switch
Contents
Positive Grid Spark Control Wireless Footswitch User Manual
Model: Spark Control Foot Switch
1. Product Overview
The Positive Grid Spark Control is a wireless footswitch pedal designed to provide hands-free control over your Spark 40, Spark MINI, or Spark GO guitar amplifier and its accompanying mobile application. This controller enhances your playing experience by allowing seamless switching of presets, toggling effects, and managing backing tracks without interrupting your performance.

Figure 1: The Spark Control footswitch, showcasing its four footswitches labeled I, II, III, and IV, along with power and indicator lights.
2. Setup and Connection
To use the Spark Control footswitch, you must have the accompanying Spark app installed on your mobile device (smartphone or tablet) and a compatible Spark amplifier (Spark 40, Spark MINI, or Spark GO).
2.1 Initial Pairing
- Charge the Footswitch: Ensure your Spark Control footswitch is sufficiently charged. It is battery-powered and offers long play time on a single charge.
- Power On Spark Amp: Turn on your Positive Grid Spark amplifier.
- Open Spark App: Launch the Spark app on your mobile device.
- Enable Bluetooth: Ensure Bluetooth is enabled on your mobile device. The Spark Control connects wirelessly via Bluetooth.
- Pairing: Within the Spark app, navigate to the settings or connection menu to pair with your Spark Control footswitch. The footswitch should appear as an available device. Select it to establish the connection.

Figure 2: The Spark Control footswitch demonstrating seamless wireless pairing with the Spark amp and mobile app.
2.2 Customization within the App
The Spark app allows extensive customization of the footswitch functions. You can assign various actions to each of the four footswitches (I, II, III, IV) to suit your playing style and needs.
- Preset Switching: Assign footswitches to cycle through your saved presets on the Spark amp.
- Effect Toggling: Configure footswitches to turn individual effects (e.g., drive, modulation, delay, reverb) on or off.
- Backing Track Control: Use footswitches to start, stop, pause, rewind, or fast-forward backing tracks within the app.
- Other Functions: Explore additional customizable functions as they become available through app updates.

Figure 3: The Spark app interface demonstrating deep customization options for assigning functions to the footswitch.
3. Operating the Spark Control
Once paired and configured, the Spark Control provides intuitive hands-free operation. The footswitch's LED indicators will show its status and the active functions.
3.1 Basic Operation
- Power Button: Press and hold the power button to turn the footswitch on or off.
- Footswitches (I, II, III, IV): Tap the assigned footswitches to activate their configured functions (e.g., switch presets, toggle effects).
- LED Indicators: Observe the LED indicators on the footswitch for feedback on connection status, battery level, and active functions.

Figure 4: A user's foot engaging one of the footswitches on the Spark Control, demonstrating hands-free operation.
3.2 Demonstration Video
Video 1: An official demonstration of the Spark Control footswitch by R.J. Ronquillo, showcasing its features and functionality in a practical setting.
4. Maintenance
4.1 Cleaning
Wipe the footswitch with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and internal components.
4.2 Battery Care
The Spark Control is equipped with a Lithium Ion battery. For optimal battery life:
- Charge the device regularly, even if not in frequent use.
- Avoid fully discharging the battery frequently.
- Store the footswitch in a cool, dry place when not in use.
- A single charge can provide over 4 months of play with 1 hour of average daily use.

Figure 5: The Spark Control highlights its long-lasting battery, capable of providing extended usage on a single charge.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Footswitch not connecting to Spark app. | Bluetooth is off, footswitch battery is low, or app is not open. | Ensure Bluetooth is enabled on your mobile device. Charge the footswitch. Make sure the Spark app is open and running in the foreground. Restart both the footswitch and the app. |
| Functions not responding. | Incorrect function assignment in app, or temporary software glitch. | Check the customization settings in the Spark app to ensure functions are correctly assigned. Try re-assigning the functions. Restart the app and footswitch. |
| Short battery life. | Frequent heavy use, or battery degradation over time. | Ensure the footswitch is fully charged before use. If battery life significantly degrades, contact Positive Grid support. |
6. Specifications
- Model: Spark Control Foot Switch
- Item Weight: 10.9 ounces
- Product Dimensions: 2.76 x 9.76 x 1.77 inches
- Batteries: 1 Lithium Ion battery (included)
- Color: Black
- Compatible Devices: Spark 40, Spark MINI, Spark GO guitar amplifiers
- Connectivity: Wireless (Bluetooth)
- Material Type: Plastic
- Power Source: Battery Powered
7. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Positive Grid website or contact their customer support directly. Keep your proof of purchase for warranty claims.
Visit the Positive Grid Store: Positive Grid Amazon Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.