PRORECK Club 8000 PA Speaker System User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your PRORECK Club 8000 PA Speaker System. Please read these instructions thoroughly before operating the system and retain this manual for future reference. The PRORECK Club 8000 is a powerful stereo DJ/Powered PA Speaker System designed for various audio applications, featuring two 18-inch subwoofers and six 6-inch line array speakers, with integrated Bluetooth, USB, and SD card playback capabilities.

2. Safety Information

• Electrical Safety: Always connect the system to a grounded power outlet. Do not expose the unit to rain or moisture. Disconnect power before cleaning or servicing.
• Ventilation: Ensure adequate ventilation around the subwoofers to prevent overheating. Do not block ventilation openings.
• Placement: Place the system on a stable, level surface. Avoid placing near heat sources or in direct sunlight.
• Hearing Protection: Prolonged exposure to high volume levels can cause permanent hearing damage. Use caution when adjusting volume.
• Servicing: Do not attempt to service this unit yourself. Refer all servicing to qualified service personnel.

3. Package Contents

Verify that all items listed below are included in your package:

• 1 x Active Subwoofer (18-inch)
• 1 x Passive Subwoofer (18-inch)
• 6 x Line Array Speakers (6-inch)
• 2 x Speaker Stand Poles
• 1 x Power Cable (6-feet)
• 1 x Remote Control
• Necessary connection cables (e.g., Speakon cable for passive subwoofer, array speaker cables)
• 1 x User Manual (this document)

Image: Overview of the PRORECK Club 8000 PA Speaker System and included accessories.

4. Component Identification

4.1 Front View and Key Features

Image: Detailed front view of the active subwoofer and array speakers, highlighting key features.

• Array Speakers: Deliver powerful treble and mid-range frequencies.
• Subwoofer: Provides deep bass response.
• Speaker Stand Pole: Adjustable and strong for secure speaker placement.
• Rotating Knob: Secures the stand pole to the subwoofer.
• Lifting Handle: Conveniently located for transport of subwoofers.

4.2 Rear Control Panel (Active Subwoofer)

Image: Detailed diagram of the active subwoofer's rear control panel with numbered functions.

1. MP3/BT Volume Control: Adjusts the volume for MP3 player and Bluetooth audio.
2. SUB Frequency Control: Adjusts the crossover frequency for the subwoofer.
3. POWER LED: Indicates when the unit is powered on.
4. PHASE Switch: Adjusts the phase of the subwoofer output.
5. LIMIT LED: Illuminates when the signal is clipping, indicating potential distortion.
6. SUB Volume Control: Adjusts the volume level of the subwoofer.
7. MASTER Volume Control: Adjusts the overall output volume of the system.
8. RCA Input: Stereo RCA input for connecting external audio devices.
9. AUX (3.5mm) Input: 3.5mm auxiliary input for connecting portable audio devices.
10. XLR/6.35 Composite Input: Combo input for XLR or 6.35mm (1/4-inch) connections.
11. ECHO Level Control: Adjusts the echo effect for microphone inputs.
12. MIC1 & MIC2 Volume Control: Adjusts the volume levels for microphone inputs.
13. 2 MIC XLR & 1/4" Inputs: Dedicated inputs for microphones, supporting both XLR and 1/4-inch connectors.
14. XLR Output: XLR output for connecting to additional PA systems or recording devices.
15. MAIN POWER Switch: Turns the system power on or off.
16. AC POWER with Built-in Fuse: Power input and integrated fuse for protection.
17. 115V/230V AC Selector: Switch to select appropriate voltage for your region. Ensure correct setting before powering on.
18. MP3 Player: Digital media player with USB and SD card slots.
19. SPEAKER OUT: Output for connecting the line array speakers.
20. SPEAKON Output to Passive Subwoofer: Dedicated Speakon output for connecting the passive subwoofer.

5. Setup Instructions

Follow these steps to correctly set up your PRORECK Club 8000 PA Speaker System:

1. Unpacking: Carefully remove all components from their packaging.
2. Subwoofer Placement: Place the active and passive subwoofers in your desired location. Ensure they are on a stable, level surface.
3. Attach Speaker Poles: Insert the speaker stand poles into the top mounting holes of each subwoofer. Secure them using the rotating knobs.
4. Mount Array Speakers: Stack the three line array speakers onto each pole. Ensure they are securely seated.
5. Connect Array Speakers: Use the provided cables to connect the line array speakers to the 'SPEAKER OUT' terminals on the active subwoofer.
6. Connect Passive Subwoofer: Use the Speakon cable to connect the 'SPEAKON Output to Passive Subwoofer' on the active subwoofer to the input on the passive subwoofer.
7. Power Connection: Before connecting the power cable, ensure the 115V/230V AC Selector (17) is set to the correct voltage for your region. Connect the power cable to the AC POWER input (16) on the active subwoofer, then plug it into a grounded power outlet.

Image: Visual guide for assembling the speaker system and its dimensions.

Image: Rear view illustrating the connection between the active and passive subwoofers.

6. Operating Instructions

6.1 Power On/Off

Press the MAIN POWER Switch (15) to turn the system on or off. The POWER LED (3) will illuminate when the unit is on.

6.2 Volume Controls

• MASTER Volume Control (7): Adjusts the overall output volume of the entire system.
• SUB Volume Control (6): Adjusts the volume level of the subwoofers independently.
• MP3/BT Volume Control (1): Adjusts the volume specifically for Bluetooth and USB/SD playback.
• MIC1 & MIC2 Volume Control (12): Adjusts the volume for connected microphones.

6.3 Bluetooth Pairing

1. Ensure the system is powered on.
2. Press the 'MODE' button on the MP3 Player (18) or remote control until 'Bluetooth' mode is selected. The display will show 'BT'.
3. On your Bluetooth-enabled device (e.g., smartphone, tablet), search for available devices.
4. Select 'PRORECK Club 8000' from the list to pair. A confirmation sound will indicate successful pairing.
5. Adjust the MP3/BT Volume Control (1) and MASTER Volume Control (7) to your desired listening level.

6.4 USB/SD Card Playback

1. Insert a USB drive or SD card into the corresponding slot on the MP3 Player (18).
2. The system will automatically switch to USB/SD mode and begin playing compatible audio files. If not, press the 'MODE' button to select USB/SD.
3. Use the controls on the MP3 Player (18) or remote control to play/pause, skip tracks, and adjust volume.

6.5 Using External Audio Inputs

The system supports RCA (8), 3.5mm AUX (9), and XLR/6.35 Composite (10) inputs.

1. Connect your external audio source (e.g., mixer, CD player, laptop) to the desired input.
2. Ensure the MP3 Player (18) is not in Bluetooth or USB/SD mode. The system will automatically prioritize external line inputs.
3. Adjust the MASTER Volume Control (7) for the overall output.

6.6 Microphone Usage

1. Connect microphones to the 2 MIC XLR & 1/4" Inputs (13).
2. Adjust the MIC1 & MIC2 Volume Control (12) to set the microphone level.
3. Use the ECHO Level Control (11) to add an echo effect to the microphone audio, if desired.

6.7 Advanced Controls

• SUB Frequency Control (2): Adjust this knob to set the crossover point for the subwoofer, determining which low frequencies are handled by the subwoofer.
• PHASE Switch (4): Use this switch to adjust the phase of the subwoofer output relative to the main speakers. Experiment with both positions to find the best bass response in your listening environment.
• LIMIT LED (5): If this LED illuminates frequently or stays lit, it indicates that the input signal is too high, potentially causing distortion. Reduce the input volume from your source or the MASTER Volume Control (7) until the LED no longer lights up consistently.

7. Connections to External Devices

The PRORECK Club 8000 offers versatile connectivity options for various audio setups.

Image: Diagram showing how to connect microphones, mobile devices, and a mixer to the active subwoofer.

• Microphones: Connect dynamic microphones directly to the XLR or 1/4" MIC inputs (13).
• Mixers: Connect the main output of an audio mixer to the XLR/6.35 Composite Input (10) or RCA Input (8) on the active subwoofer.
• Smartphones/Tablets: Connect via Bluetooth (Section 6.3) or use a 3.5mm AUX cable to the AUX (3.5mm) Input (9).
• Laptops/Computers: Connect using a 3.5mm AUX cable to the AUX (3.5mm) Input (9) or RCA cables to the RCA Input (8).
• Daisy-Chaining: Use the XLR Output (14) to send the audio signal to another powered PA system or recording device.

8. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior surfaces of the speakers and subwoofers. Do not use liquid cleaners or solvents.
• Storage: When not in use for extended periods, store the system in a cool, dry place, preferably in its original packaging or protective covers.
• Cable Care: Regularly inspect all cables for damage. Replace frayed or damaged cables immediately.
• Fuse Replacement: If the unit does not power on, check the fuse located within the AC POWER input (16). Replace with a fuse of the same type and rating if necessary.

9. Troubleshooting

10. Specifications

11. Warranty and Support

PRORECK products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or contact PRORECK customer support directly. If you encounter any issues or require technical assistance, please reach out to the manufacturer's customer service department. Contact information can typically be found on the PRORECK official website or through your purchase platform.