Introduction
This manual provides detailed instructions for the safe and effective use of your kensen RFCD-9088 Electric Body Hair Trimmer. Please read all instructions carefully before first use and retain this manual for future reference.
Safety Information
For safe operation, always use the guide comb to avoid cuts or nicks, especially on loose wrinkle skin. Keep the device away from water while charging to prevent electrical hazards.
- Always ensure the trimmer is turned off before cleaning or attaching/detaching accessories.
- Do not use the trimmer if the blades are damaged or broken, as this may cause injury.
- Keep out of reach of children.
- Do not immerse the charging base in water.
- Avoid extreme temperatures and direct sunlight.
What's Included
Your kensen RFCD-9088 package includes the following items:
- kensen RFCD-9088 Body Hair Trimmer
- Attachment (Guide Combs)
- Lithium Ion Battery (pre-installed)
- Charger (USB-C cable)
- Cleaning Brush
Image: The kensen RFCD-9088 trimmer, two guide combs (3.0mm and 6.0mm), a USB-C charging cable, a cleaning brush, and a travel case.
Setup
1. Charging the Trimmer
Before first use, fully charge the trimmer. The built-in lithium battery is powerful and durable.
- Connect the USB-C charging cable to the trimmer's charging port.
- Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a USB port.
- The LED light on the trimmer will indicate charging status. A full charge provides approximately 30 uses.
- Do not use the trimmer while it is charging.
Image: The kensen trimmer connected to a USB-C charging cable, with an illuminated LED light indicating charging.
2. Attaching Guide Combs
The trimmer comes with two guide combs (3.0mm and 6.0mm) to adjust trimming length.
- Ensure the trimmer is turned off.
- Align the desired guide comb with the trimmer head.
- Gently push the comb onto the trimmer head until it clicks into place.
- To remove, gently pull the comb away from the trimmer head.
Operating Instructions
General Trimming
The kensen RFCD-9088 is designed for body and groin hair grooming. Its advanced ceramic blades reduce the risk of cuts and skin irritation.
- Ensure the trimmer is charged and a guide comb is attached if desired.
- Press the power button to turn on the trimmer.
- Hold the trimmer at a slight angle against the skin and move it slowly against the direction of hair growth.
- For sensitive areas, always use a guide comb and proceed with caution to avoid nicks, especially on loose skin.
- The built-in LED light assists in trimming in low-light conditions, ensuring a safe and close shave experience.
Image: A person demonstrating the use of the kensen trimmer on various body areas including the chest, armpit, groin, and legs.
Image: A detailed view of the trimmer's double blade design, highlighting the fixed blade for skin protection and the moving ceramic blade for efficient hair cutting without pulling.
Wet or Dry Use
The kensen RFCD-9088 is IPX7 waterproof, allowing for both wet and dry use.
- You can use the trimmer in the shower for added convenience.
- Ensure the charging port cover is securely closed when using in wet conditions.
- Do not charge the trimmer in wet environments.
Image: The kensen trimmer partially submerged in water, demonstrating its IPX7 waterproof capability, meaning it can be fully submerged in 1 meter of water for 30 minutes.
Maintenance
Cleaning the Trimmer
Regular cleaning ensures optimal performance and hygiene.
- Turn off the trimmer and detach any guide combs.
- Rinse the trimmer head under running water. The IPX7 waterproof design allows for easy cleaning.
- For thorough cleaning, you can open the blade head to remove trapped hairs.
- Use the provided cleaning brush to remove any stubborn hair particles from the blades.
- Allow the trimmer to air dry completely before storing or recharging.
Image: The kensen trimmer being rinsed under running water, showing its easy-to-clean design with a removable blade and practical oiling point.
Troubleshooting
If you encounter any issues with your kensen RFCD-9088 trimmer, please consider the following:
- Trimmer not turning on: Ensure the battery is fully charged.
- Reduced performance or pulling hair: Clean the blades thoroughly. The blades may also require oiling for optimal performance (oiling point shown in cleaning image).
- Cuts or nicks: Always use a guide comb, especially on sensitive or loose skin, and trim slowly.
- For further assistance, please refer to the Warranty and Support section.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 5.35 x 1.26 x 1.18 inches |
| Item Weight | 4.06 ounces |
| Model Number | RFCD-9088 |
| Battery | 1 Lithium Ion battery (included) |
| Manufacturer | kensen |
| Special Features | Detachable Head, Fast Charging, Low Noise, Rechargeable, Waterproof (IPX7) |
| Power Source | Battery Powered |
| Wattage | 2 kWh |
Warranty and Support
Your kensen RFCD-9088 trimmer comes with a ONE Year Free Warranty. kensen is committed to providing a wonderful grooming experience and offers dedicated customer support.
- Warranty Coverage: One year free warranty from the date of purchase.
- Customer Support: If you have any questions or encounter problems with your product, please contact kensen customer service. Our after-sales service team aims to resolve your queries within 12 hours.
- For more information, visit the official kensen store on Amazon: kensen Store.
