1. Introduction
The Phanteks Eclipse P600S is a versatile PC chassis designed to offer a balance between silent operation and high-performance airflow. This manual provides detailed instructions for the installation, operation, and maintenance of your Eclipse P600S PC case. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance.
Image 1.1: The Phanteks Eclipse P600S Matte White Edition PC Case, showcasing its sleek design.
2. Key Features
- Hybrid Design: Seamlessly switch between silent and high-performance modes by adjusting the front and top panels.
- Sound Dampening Panels: Equipped with effective soundproofing panels for reduced noise emissions in silent mode.
- High-Airflow Fabric Mesh: Utilizes Phanteks' high-airflow fabric for maximum cooling performance.
- Extensive Motherboard Support: Compatible with ATX, uATX, mITX, and E-ATX motherboards (up to 280mm wide).
- Integrated DRGB Lighting: Includes three 140mm DRGB fans with addressable RGB lighting, compatible with major motherboard sync technologies.
- Universal Fan Hub: Centralized control for fan performance and acoustics.
- Advanced Connectivity: Features a front I/O panel with 1x USB 3.1 Type-C and 2x USB 3.0 ports.
- Watercooling Ready: Supports high-end watercooling solutions for both 120mm and 140mm radiator form factors.
- Dual System Support: Allows for the installation of an ITX motherboard in the top section to run simultaneously with the main system.
Image 2.1: The Phanteks Eclipse P600S featuring three included 140mm D-RGB fans, compatible with various motherboard RGB sync technologies.
3. Package Contents
Verify that all components are present before proceeding with installation:
- Phanteks Eclipse P600S PC Chassis (Matte White, Tempered Glass)
- 3x Phanteks Premium 140mm DRGB Fans (pre-installed)
- Accessory Box (containing screws, cable ties, and other small parts)
- User Manual (this document)
- 4x 3.5" HDD brackets (pre-installed)
- 3x 2.5" SSD brackets (pre-installed)
4. Setup and Installation
This section guides you through the process of installing your PC components into the Eclipse P600S chassis.
4.1. Component Breakdown
Familiarize yourself with the various removable and adjustable components of the case.
Image 4.1: An exploded view illustrating the various components of the Phanteks Eclipse P600S, including panels, brackets, and filters.
4.2. Preparing the Chassis
- Place the chassis on a stable, flat surface.
- Remove the tempered glass side panel by unlatching it and carefully lifting it away.
- Remove the rear side panel to access the cable management area.
Image 4.2: The Phanteks Eclipse P600S with its tempered glass side panel open, revealing the spacious interior.
4.3. Motherboard Installation
- Install the necessary motherboard standoffs for your specific motherboard form factor (E-ATX, ATX, uATX, mITX).
- Carefully place your motherboard onto the standoffs, aligning the screw holes.
- Secure the motherboard with the provided screws.
4.4. Storage Device Installation
The P600S supports up to 10x 3.5" HDDs (4 included) and 3x 2.5" SSDs (3 included).
- 3.5" HDDs: Mount HDDs into the removable drive trays located in the PSU shroud area. Slide the trays back into their slots until they click into place.
- 2.5" SSDs: Mount SSDs onto the dedicated 2.5" brackets, then secure these brackets to the rear of the motherboard tray.
Image 4.3: Interior view of the Phanteks Eclipse P600S, highlighting the drive bay area beneath the PSU shroud.
4.5. Power Supply Unit (PSU) Installation
- Slide the PSU into the dedicated compartment at the bottom rear of the chassis.
- Secure the PSU with screws from the rear of the case.
4.6. Front I/O Connections
Connect the front I/O cables to your motherboard. The P600S features:
- 1x USB 3.1 Type-C port
- 2x USB 3.0 ports
- Microphone jack
- Headphone jack
- Reset button
Image 4.4: Close-up of the Phanteks Eclipse P600S front I/O panel, showing the USB 3.0, USB-C, and audio ports.
4.7. Fan and Radiator Installation
The case supports various fan and radiator configurations:
- Front: Up to 3x 120mm or 3x 140mm fans (3x 140mm DRGB fans pre-installed). Radiator support up to 360mm (120mm) or 420mm (140mm).
- Top: Up to 3x 120mm or 2x 140mm fans. Radiator support up to 360mm (120mm) or 280mm (140mm).
- Rear: 1x 120mm or 1x 140mm fan. Radiator support 120mm or 140mm.
Connect all fan cables to the universal fan hub located behind the motherboard tray, then connect the fan hub to your motherboard's fan header and a SATA power connector.
5. Operating Modes: Silent vs. Performance
The Eclipse P600S features a hybrid design allowing you to optimize for either quiet operation or maximum airflow.
Image 5.1: Diagram illustrating the two interchangeable modes of the Phanteks Eclipse P600S: Silent Mode and High-Performance Mode.
5.1. Silent Mode
For reduced noise, ensure the front and top panels are closed. These panels are lined with sound-dampening material to minimize acoustic output from your components.
Image 5.2: Front view of the Phanteks Eclipse P600S with the solid front panel closed, optimized for silent operation.
5.2. High-Performance Mode
For maximum airflow and cooling, remove the front and top sound-dampening panels to reveal the high-airflow fabric mesh. This allows for unrestricted air intake and exhaust.
Image 5.3: Front view of the Phanteks Eclipse P600S with the front panel removed, exposing the mesh for high-performance airflow.
Image 5.4: An airflow diagram illustrating the optimized air pathways within the Phanteks Eclipse P600S chassis.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your PC case.
- Dust Filters: The Eclipse P600S includes removable dust filters at the front, top, and bottom. Regularly clean these filters by gently removing them and washing them with water or brushing off accumulated dust. Ensure they are completely dry before reinstallation.
- Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Interior Cleaning: Periodically use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.
7. Troubleshooting
If you encounter issues with your PC build, consider the following common troubleshooting steps related to the chassis:
- No Power: Ensure the power supply is correctly installed and connected, and all front panel power switch cables are securely attached to the motherboard.
- Fans Not Spinning/DRGB Not Lighting: Verify that all fan cables are connected to the fan hub, and the fan hub is receiving SATA power. Check DRGB connections to the motherboard or controller.
- USB Ports Not Functioning: Confirm that the front panel USB 3.0 and USB 3.1 Type-C cables are correctly plugged into the corresponding headers on your motherboard.
- Poor Airflow/Overheating: Ensure the case is in High-Performance mode (mesh panels exposed) if high cooling is required. Clean all dust filters. Verify fan orientation for proper intake and exhaust.
- Excessive Noise: If in Silent Mode, ensure all sound-dampening panels are securely closed. Check for loose components or vibrating fan mounts.
8. Specifications
| Feature | Specification |
|---|---|
| Model Name | P600S |
| Item Model Number | PH-EC600PSTG_DMW01 |
| Dimensions (LxWxH) | 20.1 x 9.45 x 20.5 inches (510 x 240 x 520 mm) |
| Item Weight | 22 pounds (10 kg) |
| Color | Matte White |
| Material | Tempered Glass, Steel, Plastic |
| Motherboard Compatibility | E-ATX (up to 280mm wide), ATX, Micro-ATX, Mini-ITX |
| Expansion Slots | 7 |
| Internal 3.5" Drive Bays | 10 (4 included) |
| Internal 2.5" Drive Bays | 3 (3 included) |
| Front I/O | 1x USB 3.1 Type-C, 2x USB 3.0, Mic, Headphone, Reset |
| Pre-installed Fans | 3x 140mm DRGB Fans (Front) |
| Fan Support (Front) | 3x 120mm or 3x 140mm |
| Fan Support (Top) | 3x 120mm or 2x 140mm |
| Fan Support (Rear) | 1x 120mm or 1x 140mm |
| Radiator Support (Front) | Up to 360mm (120mm) / 420mm (140mm) |
| Radiator Support (Top) | Up to 360mm (120mm) / 280mm (140mm) |
| Radiator Support (Rear) | 120mm / 140mm |
| Max GPU Length | 435mm / 17.24in |
| Max CPU Cooler Height | 190mm / 7.48in |
| Power Supply Mounting Type | Bottom Mount or Rear Mount |
9. Warranty and Support
Phanteks products are designed and manufactured to the highest quality standards. For detailed warranty information and technical support, please refer to the official Phanteks website or contact their customer service directly. Keep your proof of purchase for warranty claims.
For further assistance, visit the official Phanteks support page: www.phanteks.com/support.html
