DIGITNOW Video to Digital Converter Instruction Manual

1. Introduction

The DIGITNOW Video to Digital Converter is a versatile device designed to capture and record HD 1080P video from various analog and digital sources such as VCRs, VHS Tapes, Hi8 camcorders, DVDs, TV boxes, and gaming systems. It features a 5-inch OLED screen for real-time preview and playback, eliminating the need for a computer during the recording process. Recorded videos can be saved directly to an SD card or USB flash drive for easy transfer and preservation.

• Capture and Record HD 1080P Video from VCR's, VHS Tapes, Hi8, Camcorder, DVD, TV BOX & Gaming Systems.
• Watch and Preview Your Video via 5"OLED Screen.
• No Computer and Software Required: Connect and directly record.
• Plug-in USB/ SD ports, allows you use SD card (Included) or USB flash disk to save your precious old videos.
• AV & HDMI Input/Out: Come with HDMI cable and RCA to AV cable, Support Input and output AV and HDMI up to 1080P 60fps video signal, with 3.5mm video input or output ports, built-in Stereo Speakers.
• Easy to Use and Carry: The built-in large-capacity battery and lightweight size allow you to use and play watching videos anywhere, and the battery can be charged through the power adapter or the computer's USB port.

2. What's in the Box

• HD Video Capture Box
• 5V Power Adapter
• HDMI Cable
• Type-C USB Cable
• RCA to AV Cable
• User Manual
• SD card

Figure 2.1: Package Contents

Note: Before using a USB flash drive or SD card, please ensure that they are formatted as FAT32 or exFAT with a maximum capacity of 128GB.

3. Product Overview

3.1 Device Layout

Figure 3.1: Front View of the Device

The device features a 5-inch OLED screen for clear video preview and playback. Control buttons are located on the right side of the screen.

Figure 3.2: Top View of the Device

The top of the device includes a USB-C port for charging and data transfer, a USB-A port for connecting external storage (like a flash drive), and volume control buttons.

Figure 3.3: Side View of the Device (Ports)

The left side of the device houses all input and output ports: HDMI In, HDMI Out, AV Out, and AV In. These allow connection to various video sources and display devices.

Figure 3.4: Back View of the Device

The back of the device features a built-in speaker for audio playback and a small reset pinhole for system resets if needed.

4. Setup and Connections

The DIGITNOW converter supports both AV and HDMI input/output, offering flexibility for various devices.

4.1 Connecting to a Video Source

Connect your video source (e.g., VCR, DVD player, camcorder, gaming system) to the converter using either the provided RCA to AV cable or an HDMI cable.

• For AV Sources: Connect the RCA (red, white, yellow) cables from your source's AV OUT ports to the converter's AV IN port using the provided RCA to AV cable.
• For HDMI Sources: Connect an HDMI cable from your source's HDMI OUT port to the converter's HDMI IN port.

Figure 4.1: Connecting Video Sources

Ensure the input video source device (such as VHS, VCR/Camcorder, set-top boxes, computers, game consoles, etc.) is working and can provide audio or video signals to the product before recording.

4.2 Connecting to a Display (Optional)

You can connect the converter to a larger display (like a TV or monitor) to preview your video while recording or for playback.

• For AV Displays: Connect an AV cable from the converter's AV OUT port to your display's AV IN port.
• For HDMI Displays: Connect an HDMI cable from the converter's HDMI OUT port to your display's HDMI IN port.

Figure 4.2: Previewing on an External Display

5. Operating Instructions

5.1 Powering On/Off

To power on the device, press and hold the power button located on the top. The screen will display a blue background. To power off, press and hold the same button.

5.2 Recording Video

Once your video source is connected and powered on, the live feed will appear on the 5-inch OLED screen. Press the 'Record' button (usually marked with a red dot or 'REC') to begin recording. Press it again to stop recording.

Figure 5.1: Recording from a VCR

The device automatically splits long recordings into MOV video files of 4 GB each (1080p input auto-split about 20 minutes, 720P is about 40 minutes). If you wish to combine longer recorded videos into one file, you can do so on a computer after recording.

5.3 Playback

To play back recorded videos, navigate to the playback mode using the 'Mode' button. Use the 'PREV' and 'NEXT' buttons to browse through your recorded files. Press 'OK' to play a selected video.

6. Menu Navigation and Settings

Press the 'MENU' button to access the device settings. Use the navigation buttons (up/down, OK) to select and adjust options.

• Language: Select your preferred language.
• System Date/Time Setting: Adjust the date and time.
• Date Stamp: Turn the date stamp on or off for recorded videos.
• Movie Quality: Choose recording quality (e.g., 1080P60 H, 1080P60 L, 720P).
• Video Source: Manually select between HDMI or AV input.
• Auto Stop Recording: Set a time limit for automatic recording stop (e.g., 60 min, 90 min, 120 min, 150 min).
• USB Mode: Switch between 'Charging' and 'MSDC' (Mass Storage Device Class) for connecting to a computer.
• Default Storage Device: Select between SD card or USB as the default storage.
• Schedule Recording: Set daily, once, or weekly scheduled recordings.
• Formatting: Format the inserted SD card or USB drive (Note: This will erase all data).
• Restore Factory Settings: Reset the device to its default settings.
• Firmware Version: View the current firmware version (e.g., V102-A V4.3).

7. Battery and Storage

The device has a built-in 1800mAh large-capacity battery, allowing for portable use. It can be charged via the provided 5V power adapter or a computer's USB port. A full charge typically takes about 2.5 hours.

Figure 7.1: Battery and Storage Indicators

The device comes with an SD card (typically 32GB) for immediate use. For optimal performance, it is recommended to use a Class 10 or higher speed class SD card. Incorrect format or a low speed level SD card may affect the normal use of the device.

8. Troubleshooting

If you encounter issues with your DIGITNOW Video to Digital Converter, refer to the following common troubleshooting steps:

• No Audio/Video Signal: Before pressing the record button, ensure the input video source device (such as VHS, VCR/Camcorder, set-top boxes, computers, game consoles, etc.) is working and can provide audio or video signals to the product.
• Software Stuck/Unresponsive: If the video capture card's software gets stuck, the system can be reset by inserting a pin or similar object into the small hole on the back of the device.
• Recording Failure: If you do not succeed in recording video material, the cables may be connected incorrectly or too loosely. Double-check all connections.
• SD Card/USB Drive Issues: Before using a USB flash drive or an SD card, please make sure to set the format to FAT32 or exFAT, and the maximum capacity to 128GB. For the best result, it is recommended to use a Class 10 or higher speed class SD card. Incorrect format or a low speed level SD card may affect the normal use of the device.
• How to Format Storage via Device:
  1. Press the "Menu" button to enter the menu options, then select the "Format" option.
  2. Press the "OK" button to enter the format interface, then select the "YES" option and press the "OK" button to confirm the format.

9. Specifications

10. Warranty and Support

Specific warranty information is not provided in the product details. For warranty claims, technical support, or further assistance, please refer to the contact information provided in the physical user manual included with your product or visit the official DIGITNOW website.