1. Product Overview
The TRENDnet 8-Port 10G Switch, model TEG-S708, is an unmanaged multi-gigabit Ethernet switch designed to provide high-bandwidth performance for demanding network environments. It features eight dedicated 10G RJ-45 ports, offering a 160Gbps switching capacity. This switch is suitable for upgrading network infrastructure to support faster data transfer rates, reducing bottlenecks, and improving overall network efficiency. Its sturdy metal housing is rack-mountable, providing flexible installation options.
2. Package Contents
Verify that all items are present and in good condition. If any items are missing or damaged, please contact your reseller for assistance.
- TEG-S708 8-Port 10G Switch
- Quick Installation Guide
- Power Cord (1.5m / 4.9 ft.)
- Rack mount kit
3. Product Features
The TEG-S708 switch offers the following key features:
- 8 x 10GBASE-T Ports: Provides eight RJ-45 ports supporting 1Gbps, 2.5Gbps, and 10G speeds.
- 160Gbps Switching Capacity: Ensures high-speed data transfer for demanding applications.
- Multi-Gigabit Support: Compatible with 2.5G and 5G speeds over existing Cat5e or better cabling, and 10G speeds over Cat6A or better cabling.
- Rack Mountable Design: Sturdy metal housing with included rack mount kit for flexible installation.
- LED Indicators: Front-panel LEDs for Link/Act, 10G/2.5G/5G Link, and 100/1000M Act status.
- NDAA & TAA Compliant: Meets U.S. integrity and supply chain standards for government contracts.
- Lifetime Protection: Backed by TRENDnet’s Lifetime Manufacturer Protection.
4. Physical Description
The TRENDnet TEG-S708 is a compact, black metal-cased switch designed for durability and efficient heat dissipation. It features front-facing RJ-45 ports and LED indicators, with the power input located at the rear.
Figure 4.1: Front view of the TRENDnet TEG-S708 8-Port 10G Switch, showing the eight RJ-45 ports and LED indicators.
Figure 4.2: Back view of the TRENDnet TEG-S708, illustrating the AC power input (100-240 VAC, 50/60 Hz).
Figure 4.3: The TEG-S708 switch installed in a standard 1U 19-inch rack, demonstrating its rack-mountable design.
5. Setup
The TEG-S708 is a plug-and-play unmanaged switch, requiring no software configuration for basic operation. Follow these steps for initial setup:
- Power Connection: Connect the provided power cord to the AC power input on the back of the switch and then to a power outlet.
- Network Connections: Connect your network devices (e.g., computers, servers, other switches) to the RJ-45 ports on the front of the TEG-S708 using appropriate Ethernet cables.
- Cable Compatibility: Ensure you use Cat5e or better cabling for 2.5G/5G speeds and Cat6A or better cabling for 10G speeds to achieve optimal performance.
Figure 5.1: Cable compatibility guidelines for the TEG-S708. Supports 10G over Cat6A or better, and 2.5G over Cat5e or better cabling.
Figure 5.2: The TEG-S708 offers simple plug-and-play setup without special configurations.
6. Operation
Once powered on and connected, the TEG-S708 operates automatically. The LED indicators provide visual feedback on the status of the switch and its connections.
6.1 LED Indicators
- PWR/SYS (Power/System): Indicates the power status of the device. Green for normal operation.
- FAULT: Indicates a system fault. Red for fault condition.
- LINK/ACT (Link/Activity): Indicates a network link and data activity for each port.
- 10G/2.5G/5G LINK: Indicates a 10Gbps, 5Gbps, or 2.5Gbps link speed.
- 100/1000M ACT: Indicates a 100Mbps or 1000Mbps (Gigabit) link speed and activity.
6.2 Network Configuration Example
The TEG-S708 can be integrated into various network setups to enhance speed and performance. Below is an example of a multi-gigabit network diagram.
Figure 6.1: A typical 10G/Multi-Gigabit network diagram showing the TEG-S708 connecting various devices and other TRENDnet switches.
Video 6.1: Official TRENDnet video demonstrating End-to-End Multi-Gigabit Networking Solutions, showcasing how various TRENDnet products, including switches and adapters, can be integrated for high-speed networks.
Video 6.2: Official TRENDnet video illustrating the 10G Networking Ecosystem, highlighting the benefits and applications of 10G networking components.
7. Maintenance
To ensure the longevity and optimal performance of your TRENDnet TEG-S708 switch, consider the following maintenance practices:
- Ventilation: Ensure proper airflow around the device. Do not block the ventilation openings.
- Cleaning: Periodically clean the exterior of the switch with a soft, dry cloth. Avoid using liquid or aerosol cleaners.
- Cable Management: Keep network cables organized and free from excessive bends or kinks to prevent signal degradation.
- Firmware Updates: Check the TRENDnet website periodically for any available firmware updates to ensure the latest features and security enhancements.
8. Troubleshooting
If you encounter issues with your TEG-S708 switch, refer to the following common troubleshooting steps:
- No Power: If the PWR/SYS LED is off, ensure the power cord is securely connected to both the switch and the power outlet. Try a different power outlet.
- No Link Light: If a port's LINK/ACT LED is off, verify that the Ethernet cable is properly connected at both ends. Try a different cable or port. Ensure the connected device is powered on and functioning correctly.
- Slow Speed: If network speeds are lower than expected, confirm that your connected devices and cabling support the desired multi-gigabit speeds (e.g., Cat6A for 10G). Check for network congestion or issues with the connected devices.
- FAULT LED On: If the FAULT LED is red, this indicates a system error. Try power cycling the device. If the issue persists, contact TRENDnet technical support.
For further assistance, refer to the comprehensive support resources available on the TRENDnet website or contact their technical support team.
9. Specifications
Detailed technical specifications for the TRENDnet 8-Port 10G Switch TEG-S708:
| Feature | Specification |
|---|---|
| Model Number | TEG-S708 |
| Product Dimensions | 12.83"L x 9.05"W x 1.69"H |
| Item Weight | 3.6 Pounds |
| Number of Ports | 8 x 10GBASE-T RJ-45 Ports |
| Data Transfer Rate | 160 Gigabits Per Second (Switching Capacity) |
| Supported Speeds | 10 Mbps, 100 Mbps, 1000 Mbps, 2.5 Gbps, 5 Gbps, 10 Gbps |
| Interface Type | RJ45 |
| Case Material | Metal |
| Voltage | 7.5 Volts (DC) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Included Components | TEG-S708, Quick Installation Guide, Power Cord, Rack mount kit |
Figure 9.1: Dimensional drawing of the TRENDnet TEG-S708 switch, showing its length, width, and height.
10. Warranty and Support
TRENDnet stands by the quality of its products. The TEG-S708 8-Port 10G Switch is backed by TRENDnet’s Lifetime Manufacturer Protection. This protection covers select fiber products and metal-enclosed switches in the U.S. and Canada. Please refer to the official TRENDnet website for full warranty terms and conditions.
For technical assistance, our team of English-speaking advisors and support experts are available during normal business hours. We are committed to providing reliable support for all your needs.
- Technical Support: Visit the official TRENDnet support website for FAQs, driver downloads, and contact information.
- Product Registration: Register your product online to ensure you receive the latest updates and support information.
