1. Introduction
Thank you for choosing the Klarstein Galeras Electric Fireplace. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your electric fireplace. Please read these instructions thoroughly before use and retain them for future reference.
The Klarstein Galeras electric fireplace offers a realistic flame effect with adjustable colors and brightness, combined with a powerful heating function. It is designed for both wall-mounting and built-in installation, seamlessly integrating into various living spaces.
2. Safety Instructions
- Ensure the power supply voltage matches the rating label on the appliance.
- Do not operate the fireplace with a damaged cord or plug. Contact qualified service personnel for repairs.
- Keep combustible materials such as furniture, curtains, and bedding at least 1 meter (3 feet) away from the front and sides of the fireplace.
- Do not block air vents. Ensure adequate ventilation around the unit.
- Do not immerse the appliance in water or other liquids.
- Unplug the fireplace from the power outlet when not in use or before cleaning.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- The fireplace is equipped with an overheating protection system. If the unit overheats, it will automatically shut off. Unplug the unit and allow it to cool down before restarting.
3. Package Contents
Carefully unpack the box and ensure all items are present and undamaged. If any items are missing or damaged, contact your retailer.
- 1 x Electric Fireplace Unit
- 1 x Remote Control
- 1 x User Manual (this document)
- Decorative accessories (e.g., logs, crystals, or stones)
- Mounting hardware (screws, wall plugs)
4. Product Features
The Klarstein Galeras Electric Fireplace offers a range of features for comfort and ambiance:
- Heating Power: Selectable between 900 W and 1800 W.
- Adjustable Thermostat: Temperature range from 16 °C to 30 °C.
- LED Flame Effect: Realistic flame simulation with 3 color options.
- Brightness Control: 5 adjustable levels for flame brightness.
- Timers: Programmable weekly timer and shut-off timer.
- Remote Control: Convenient operation from a distance.
- Safety Features: Overheating protection and temperature warning function.
- Installation: Suitable for wall-mounting or built-in installation.
- Display: LED display for settings, temperature shown in Celsius or Fahrenheit.
Image: The Klarstein Galeras Electric Fireplace offers two heating power variants (900W and 1800W) and an efficient heater with temperatures adjustable between 16°C and 30°C.
Image: The fireplace provides ambiance for every occasion with three optical fire variants (logs, crystals, stones), LED lights with 5 adjustable brightness levels, and flame colors (red, blue, purple).
5. Setup and Installation
The Klarstein Galeras Electric Fireplace can be installed as a wall-mounted unit or built directly into a wall recess.
5.1 Wall Mounting
- Choose a suitable location on a solid wall, ensuring sufficient clearance from combustible materials (refer to safety instructions).
- Mark the desired height and position for the mounting bracket.
- Drill holes according to the bracket's specifications and insert wall plugs.
- Secure the mounting bracket to the wall using the provided screws.
- Carefully lift the fireplace and hook it onto the mounting bracket. Ensure it is securely seated.
5.2 Built-in Installation
- Prepare a wall recess with the following dimensions: 77.5 cm (Width) x 45 cm (Height) x 11.5 cm (Depth).
- Ensure there is access to a power outlet within the recess or nearby.
- Carefully slide the fireplace unit into the prepared recess.
- Secure the fireplace to the wall using appropriate screws through the designated mounting points on the unit.
Image: The Klarstein Galeras Electric Fireplace offers simple installation, allowing it to be wall-mounted or built directly into the wall.
Image: Detailed installation dimensions for the 102cm model: 102 cm (W) x 47 cm (H) x 12 cm (D). Built-in dimensions are 77.5 cm (W) x 45 cm (H) x 11.5 cm (D).
6. Operating Instructions
The fireplace can be operated using the control panel on the unit or the included remote control.
6.1 Remote Control Functions
Insert 2x AAA batteries into the remote control. Point the remote control towards the fireplace's receiver.
- Power Button: Turns the fireplace ON or OFF.
- Heat Settings: Toggle between 900 W (low heat), 1800 W (high heat), or no heat.
- Temperature Control: Use '+' and '-' buttons to adjust the desired room temperature (16-30 °C).
- Flame Color: Cycle through 3 different flame color options.
- Brightness: Adjust the flame brightness through 5 levels.
- Timer: Set the shut-off timer (e.g., 1-9 hours) or activate the weekly timer program.
- °C/°F: Switch the temperature display between Celsius and Fahrenheit.
6.2 Weekly Timer Programming
Refer to the detailed instructions in the full user manual for setting up the weekly timer, which allows you to program specific heating times for each day of the week.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your fireplace.
7.1 Cleaning
- Always unplug the fireplace before cleaning.
- Allow the unit to cool down completely.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Clean the glass panel with a glass cleaner and a soft cloth.
- Ensure no moisture enters the internal components.
7.2 Remote Control Battery Replacement
If the remote control stops responding, replace the AAA batteries. Ensure correct polarity when inserting new batteries.
8. Troubleshooting
If you encounter issues with your fireplace, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fireplace does not turn on. | No power supply. Power cord not properly connected. Overheating protection activated. | Check if the unit is plugged in and the power outlet is functional. Ensure the power cord is securely connected. Unplug the unit, let it cool for 15-20 minutes, then plug it back in. |
| No heat output. | Heat function is off. Thermostat set too low. Overheating protection activated. | Activate the heat function using the remote or control panel. Increase the desired temperature setting. Refer to the solution above for overheating protection. |
| Flame effect not working. | Flame effect is off. LED components malfunction. | Ensure the flame effect is turned on. Contact customer support if the issue persists. |
| Remote control not working. | Dead batteries. Obstruction between remote and receiver. | Replace batteries with new AAA batteries. Ensure a clear line of sight to the fireplace's receiver. |
If the problem persists after attempting these solutions, please contact Klarstein customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | GDW24-Galeras102B |
| Power Supply | 220-240 V ~ 50 Hz |
| Heating Power | 900 W / 1800 W |
| Temperature Range | 16 °C to 30 °C |
| Product Dimensions (WxHxD) | 102 x 47 x 13 cm |
| Built-in Dimensions (WxHxD) | 77.5 x 45 x 11.5 cm |
| Cable Length | Approx. 175 cm |
| Weight | Approx. 15.5 kg |
| Housing Material | Steel and Glass |
| Remote Control Batteries | AAA (not included) |
10. Warranty and Support
Klarstein products are manufactured with high-quality materials and undergo strict quality control. In the unlikely event of a defect, please contact your retailer or Klarstein customer service for assistance. Keep your proof of purchase for warranty claims.
For further support, product registration, or to download the latest version of this manual, please visit the official Klarstein website or contact their customer support channels.
