Introduction
This instruction manual provides essential information for the proper installation, use, and maintenance of your Cuisinart TOA-28 Compact Air Fryer Toaster Oven Replacement Crumb Tray. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.
Setup and Installation
The Cuisinart TOA-28 Replacement Crumb Tray is designed for easy installation into your compatible Cuisinart TOA-28 Compact Air Fryer Toaster Oven.
- Ensure Appliance is Off and Cool: Before installing or removing the crumb tray, ensure your Cuisinart TOA-28 Air Fryer Toaster Oven is unplugged and completely cool to prevent burns or electrical hazards.
- Locate Crumb Tray Slot: The crumb tray slot is typically located at the very bottom of the oven's interior, designed to catch food debris.
- Insert Crumb Tray: Slide the replacement crumb tray into the designated slot until it is fully seated. Ensure it lies flat and is securely in place.

Image: The Cuisinart TOA-28 Replacement Crumb Tray, a rectangular metal tray with a raised X-shaped pattern on its surface, designed to collect food crumbs and debris at the bottom of the toaster oven.
Operating Instructions
Once installed, the crumb tray operates passively by collecting crumbs and food particles that fall during cooking. No specific operational steps are required for the tray itself beyond its proper installation.
- Always ensure the crumb tray is in place before operating your Cuisinart TOA-28 Air Fryer Toaster Oven.
- The crumb tray helps keep the oven interior clean and prevents debris from burning on the heating elements.
Maintenance and Cleaning
Regular cleaning of the crumb tray is essential for hygiene and to prevent the accumulation of burnt food particles, which can cause smoke or odors.
- Frequency: It is recommended to clean the crumb tray after every few uses, or more frequently depending on usage.
- Removal: Ensure the oven is unplugged and cool. Carefully slide the crumb tray out from the front of the oven.
- Disposal of Debris: Discard any accumulated crumbs or food particles into a waste bin.
- Washing: Wash the crumb tray with warm, soapy water. A non-abrasive sponge or cloth can be used to remove stubborn residue. Avoid using harsh chemicals or abrasive scrubbers that could damage the tray's surface.
- Rinsing and Drying: Rinse thoroughly with clean water and dry completely before reinserting into the oven. Ensure no moisture remains to prevent rust or damage.
Troubleshooting
Most issues related to the crumb tray are minor and can be resolved with simple checks.
| Problem | Possible Cause | Solution |
|---|---|---|
| Crumb tray does not fit properly. | Incorrect model replacement part. | Verify that the crumb tray is specifically designed for the Cuisinart TOA-28 model. |
| Smoke or burning smell from oven. | Accumulated food debris on the crumb tray. | Remove and clean the crumb tray thoroughly as per maintenance instructions. |
| Tray appears damaged or warped. | Exposure to excessive heat or improper handling. | Ensure the tray is correctly positioned. If damage persists, consider replacing the tray. |
Specifications
- Model: TOA-28 (Replacement Crumb Tray)
- Brand: Cuisinart
- Package Dimensions: 13.74 x 10.43 x 1.02 inches
- Item Weight: 9.6 ounces
- ASIN: B09RNG5S11
- Date First Available: February 1, 2022





