Hunter H-HF670-VP

Hunter H-HF670-VP Replacement Filter Value Pack Instruction Manual

For Hunter HP670 Series Tower Air Purifiers

Introduction

This manual provides instructions for the installation and maintenance of the Hunter H-HF670-VP Replacement Filter Value Pack. This pack is designed for use with Hunter HP670 series tower air purifiers to ensure optimal air purification performance.

Hunter H-HF670-VP Replacement Filter Value Pack showing one HEPA filter and two pre-filters

Image: Hunter H-HF670-VP Replacement Filter Value Pack components.

Product Features

  • True HEPA Filtration: Removes up to 99.97% of airborne particles as small as 0.3 microns, including smoke, dust, pollen, pet hair, dander, mold spores, and dust mite debris.
  • Coconut Carbon Pre-filter: Neutralizes household odors from cooking, cleaning, smoking, and pets. Also captures larger particles, extending the life of the HEPA filter.
  • EcoSilver Pre-filter: Contains silver nanoparticles to prevent the growth of microorganisms, including bacteria and viruses, on the filter surface.
Diagram showing various airborne particles like smoke, odors, pet hair, dander, bacteria, mold spores, household dust, and pollen being filtered.

Image: Illustration of airborne particles filtered by the system.

Close-up view of True H13 HEPA filter and Activated Carbon Filter with descriptions.

Image: Detailed view of True H13 HEPA and Activated Carbon filter components.

Compatibility

This replacement filter value pack is compatible with the following Hunter air purifier models:

  • HP670
  • HP670WH
  • HP670BL
  • HP670GR
Diagram showing dimensions of the round HEPA filter (10.1 inches height, 7.5 inches diameter) and the rectangular pre-filter (23.5 inches height, 10.7 inches width).

Image: Filter dimensions for compatibility verification.

Package Contents

The Hunter H-HF670-VP Replacement Filter Value Pack includes:

  • 1x True HEPA Filter
  • 2x Pre-filters

Setup and Installation

Follow these steps to replace the filters in your Hunter HP670 series air purifier:

  1. Unplug the Air Purifier: Ensure the unit is unplugged from the power outlet before proceeding.
  2. Access Filters: Turn the air purifier unit upside down and twist off the bottom base to access the filter compartment.
  3. Remove Old Filter: Carefully remove the old HEPA filter and pre-filter from the unit.
  4. Install New Pre-filter: Wrap the new pre-filter around the new HEPA filter, securing it with the attached velcro.
  5. Place New Filter: Place the new filter assembly back into the unit with the sticker side facing up.
  6. Secure Base: Lay the bottom base on top of the unit and twist to lock it securely.
Four-panel image demonstrating the filter change process: 1. Unplug and twist off base. 2. Remove old filter. 3. Wrap new pre-filter. 4. Place new filter and secure base.

Image: Step-by-step guide for easy filter change.

Operating

After installing the new filters, plug in your Hunter HP670 series air purifier. Refer to your air purifier's main instruction manual for specific operating instructions, including power settings, fan speeds, and timer functions. The new filters will immediately begin purifying the air in your environment.

Four images showing the air purifier in different room settings: Living Room, Bedroom, Office, Kitchen, highlighting its versatility.

Image: Hunter air purifier providing premium filtration in various home environments.

Maintenance

Regular filter replacement is crucial for maintaining the efficiency and performance of your air purifier. Adhere to the following replacement schedule:

  • True HEPA Filter: Recommended to replace every 6 months.
  • Pre-filters (Coconut Carbon and EcoSilver): Recommended to replace every 3 months.

Replacement frequency may need to be increased in environments with higher air pollution, pet dander, or frequent cooking/smoking.

Text stating recommended replacement schedule: True HEPA filter every six (6) months and activated carbon filter every three (3) months for maximum efficiency.

Image: Filter replacement recommendations.

Troubleshooting

If your air purifier is not performing optimally after filter replacement, consider the following:

  • Reduced Airflow: Ensure the filters are installed correctly and the bottom base is securely locked. Check for any obstructions around the air intake or outlet.
  • Persistent Odors: Verify that the pre-filters are new and correctly installed. If odors persist, consider replacing pre-filters more frequently, especially in high-odor environments.
  • Indicator Lights: Refer to your air purifier's main manual for specific indicator light meanings and troubleshooting steps related to filter life reset.
  • General Performance Issues: If issues persist, consult the original air purifier manual or contact Hunter customer support.

Specifications

BrandHunter
Model NumberH-HF670-VP
Compatible DevicesHunter HP670, HP670WH, HP670BL, HP670GR Air Purifiers
MaterialPolypropylene
Item Weight16 ounces
Product Dimensions (L x W x Th)8"L x 8"W x 10"Th
Air Filter ConstructionPleated (HEPA)
Included Components1x True HEPA Filter, 2x Pre-filters
GTIN / UPC810067450577

Warranty and Support

This product comes with a 1 Year Manufacturer Warranty. For warranty claims, technical support, or further assistance, please contact Hunter Fan Company customer service or visit their official website.

You can find more information and contact details on the Hunter Brand Store.

Official Product Video

Video: Hunter Brand Video showcasing various Hunter products, including air purifiers. This video provides an overview of Hunter's commitment to innovation and fresh air solutions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.