Product Overview
The Hyper Tough 22-Piece Drill & Drive Set in Click Fit Case is an essential companion for drilling through wood and metal with precision and ease. Crafted from durable, heat-treated steel, this set ensures lasting performance and reliability. It includes a versatile range of titanium-coated drill bits and various screwdriver bits, all organized in a convenient Click Fit case.
Package Contents
Your Hyper Tough 22-Piece Drill & Drive Bit Set includes the following components:
- 7 Titanium-Coated Drill Bits: Sizes 1/16, 3/32, 7/64, 1/8, 3/16, 1/4, and 5/16 inches.
- 8 1-inch Screwdriver Bits: Phillips (#1, #2, #3), Slotted (5/32, 3/16, 1/4-inch), Square (#2), Star (T25).
- 6 2-inch Screwdriver Bits: Phillips (#1, #2, #3), Slotted (3/16, 1/4, 9/32-inch).
- 1 2-inch Magnetic Bit Holder.
- 1 Click Fit Storage Case with integrated, removable ruler and drill gauge.
Setup and Preparation
Safety First
Always wear appropriate personal protective equipment, including safety goggles, when operating power tools and using drill or drive bits. Ensure your work area is clear and well-lit.
Selecting the Correct Bit
Choose the drill bit size appropriate for the hole you intend to create, or the screwdriver bit type and size that matches the fastener you are working with. Refer to the markings on the bits for identification.
Inserting Bits
- Ensure your drill or impact driver is unplugged or has its battery removed before inserting or removing bits.
- Open the chuck of your drill/driver.
- Insert the desired drill or screwdriver bit firmly into the chuck. For screwdriver bits, you may use the 2-inch magnetic bit holder for extended reach and secure retention.
- Tighten the chuck securely around the bit to prevent slippage during operation.
Operating Instructions
Drilling
When drilling into wood, metal, or plastic, apply steady, even pressure. Start at a low speed and gradually increase as the bit engages the material. For metal, consider using cutting fluid to prolong bit life and improve cutting performance. Ensure the material is clamped securely to prevent movement.
Driving Screws
Select the correct screwdriver bit for the screw head. Apply firm, consistent pressure to prevent cam-out (the bit slipping out of the screw head). Use a speed appropriate for the material and fastener type. The magnetic bit holder helps keep screws securely attached to the bit during driving.
Using the Integrated Ruler and Drill Gauge
The removable ruler and drill gauge integrated into the case can be used to quickly measure lengths (4-inch SAE and 10-cm MM ruler) and verify drill bit sizes by inserting the bit into the corresponding hole on the gauge.
Care and Maintenance
- Cleaning: After each use, wipe down bits to remove dust, debris, or metal shavings. A dry cloth is usually sufficient.
- Storage: Always store your bits in the provided Click Fit case. This protects them from damage, prevents loss, and keeps them organized. The case is designed for secure storage and easy access.
- Inspection: Periodically inspect bits for signs of wear, dullness, or damage. Dull or damaged bits can reduce performance and potentially cause injury. Replace worn bits as necessary.
- Lubrication: For drill bits used in metal, a light coating of oil after cleaning can help prevent rust, especially if stored in humid conditions.
Troubleshooting
Bit Slipping in Chuck
Ensure the chuck is tightened securely around the bit. Check if the bit shank is clean and free of oil or debris that could reduce grip.
Difficulty Drilling/Driving
Verify that you are using the correct bit for the material and fastener. Check if the bit is dull or damaged; replace if necessary. Ensure adequate pressure and appropriate speed are being applied.
Bits Breaking
Excessive force, incorrect speed, or using a bit not designed for the material can cause breakage. Ensure the workpiece is stable and not moving during operation.
Product Specifications
| Feature | Specification |
|---|---|
| Model Number | 151087 |
| Material | Alloy Steel |
| Finish Type | Titanium |
| Shank Type | Square |
| Tool Flute Type | Straight |
| Package Dimensions | 5.91 x 3.82 x 1.69 inches |
| Item Weight | 11.64 ounces |
Warranty and Support
Specific warranty information for the Hyper Tough 22-PC Drill & Drive BIT Set is not provided in the product details. For warranty claims, technical support, or further assistance, please refer to the product packaging or contact Hyper Tough customer service directly. Contact information can typically be found on the manufacturer's official website or on the product's retail packaging.
