1. Introduction
Thank you for choosing the PureMounts PM-VAC-20 Vacuum Cleaner Holder Organizer. This stand provides a stable and organized storage solution for your Dyson cordless vacuum cleaner and its accessories. Designed for compatibility with various Dyson models, it features a robust aluminum construction, integrated cable management, and dedicated accessory holders.
Please read this manual carefully before assembly and use to ensure proper installation and optimal performance.
2. Compatibility
The PureMounts PM-VAC-20 holder is compatible with the following Dyson vacuum cleaner models:
- Dyson V6 Pro
- Dyson V7 (Pro, Fluffy)
- Dyson V8 (Fluffy, Absolute)
- Dyson Cyclone V10 (Fluffy, Absolute, Total Clean)
- Dyson V11 (Animal, Torque Drive)
- Dyson V12
- Dyson V15
- And other similar models.
Figure 2.1: Compatibility and Dimensions. This image illustrates the stand's compatibility with various Dyson models and provides key dimensions for the assembled unit.
3. Package Contents
Please check that all components are present and undamaged before proceeding with assembly. If any parts are missing or damaged, please contact customer support.
- Base Plate (1x)
- Upright Support Column (1x)
- Assembly Hardware (screws, wrench)
Figure 3.1: Included Components. This image displays the base plate, the main upright support with integrated accessory holders, and the necessary screws and wrench for assembly.
4. Setup and Assembly
Assembly of the PureMounts PM-VAC-20 is straightforward and designed for ease. The necessary tools are included in the package.
- Unpack Components: Carefully remove all parts from the packaging and verify against the package contents list.
- Attach Upright Column to Base: Align the bottom of the upright support column with the designated holes on the base plate.
- Secure with Screws: Use the provided screws and wrench to firmly attach the upright column to the base plate. Ensure all screws are tightened to prevent wobbling.
- Position the Holder: Place the assembled holder on a flat, stable surface.
Figure 4.1: Assembled Holder. This image shows the fully assembled stand with a Dyson vacuum cleaner, demonstrating its stable design and accessory organization capabilities.
5. Operating Instructions
Using your PureMounts vacuum cleaner holder is simple and designed for convenience.
- Placing the Vacuum: Gently place your Dyson vacuum cleaner onto the holder. The design ensures a secure fit, and flexible silicone pads protect your device from scratches.
- Accessory Storage: Utilize the four integrated brackets on the upright column to store your vacuum's accessories and attachments.
- Cable Management: The open-back design facilitates easy routing and fixing of your vacuum's charging cable. Ensure the cable is neatly tucked away to prevent tripping hazards and maintain a tidy appearance.
Figure 5.1: Cable Management. This image highlights the open-back design, which simplifies the routing and securing of the vacuum's charging cable for a clean setup.
6. Maintenance
To ensure the longevity and appearance of your PureMounts holder, follow these simple maintenance guidelines:
- Cleaning: Wipe the holder with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Silicone Pads: Ensure the silicone pads are clean and free of debris to maintain their protective function.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Holder is wobbly or unstable. | Screws are loose; uneven surface. | Ensure all assembly screws are tightened. Place the holder on a flat, level surface. |
| Vacuum does not fit securely. | Incorrect vacuum model; improper placement. | Verify your vacuum model is listed in the compatibility section. Ensure the vacuum is seated correctly on the holder. |
| Accessories do not stay on brackets. | Accessory not designed for bracket; overloaded bracket. | Ensure accessories are placed correctly. Avoid overloading the brackets. |
8. Specifications
- Model: PM-VAC-20
- Material: Aluminum
- Color: Black
- Dimensions (L x W x H): 390 mm x 220 mm x 1270 mm (Base: 390mm x 220mm, Height: 1270mm)
- Item Weight: 4 Kilograms
- Accessory Holders: 4 integrated brackets
- Special Features: Wide and solid base, integrated cable management, flexible silicone pads.
9. Warranty and Support
PureMounts products are manufactured with high-quality materials and undergo strict quality control. For information regarding warranty terms and conditions, or for technical support, please refer to the warranty card included with your product or visit the official PureMounts website.
For further assistance, please contact your retailer or PureMounts customer service.