Aura LED ColorStrip LED Lights User Manual

1. Product Overview

The Aura LED ColorStrip LED Lights (Model 8288HD) are designed to provide customizable lighting with various color options, including dedicated holiday modes. This product features a flexible LED strip controlled by a remote, offering dimmable functionality and multiple light settings.

This image shows the Aura LED ColorStrip LED Lights illuminated in various colors, demonstrating the multi-color capabilities of the strip. The individual LED chips are visible along the flexible strip.

2. Package Contents

Please verify that all components are present in the package:

• LED Strip (12 inches)
• Remote Control

3. Setup and Installation

1. Prepare the Surface: Ensure the installation surface is clean, dry, and smooth. Dust, dirt, or moisture can affect the adhesive's effectiveness.
2. Measure and Plan: Before removing the adhesive backing, temporarily position the LED strip to determine the desired placement and length.
3. Apply the LED Strip: Carefully peel off the protective backing from the adhesive tape on the back of the LED strip. Begin applying the strip from one end, pressing firmly along its entire length to ensure good contact with the surface.
4. Connect to Power: Connect the LED strip to the provided power source. Ensure all connections are secure.

4. Operating Instructions

The Aura LED ColorStrip is operated using the included remote control.

• Power On/Off: Press the ON/OFF button to turn the lights on or off.
• Color Selection: Use the dedicated color buttons (RED, WHITE, BLUE, GREEN) or the color wheel/selection buttons on the remote to choose your desired light color.
• Holiday Modes: The ColorStrip features specific holiday modes. Refer to your remote for buttons labeled with holiday themes or specific color combinations (e.g., Red/Green for Christmas, Red/White/Blue for patriotic themes).
• Brightness Adjustment (Dimmable): Use the BRIGHTNESS UP and BRIGHTNESS DOWN buttons to adjust the intensity of the light.
• Mode Selection: Cycle through various dynamic lighting modes (e.g., flash, fade, strobe) using the MODE button or specific mode buttons on the remote.

5. Maintenance

• Cleaning: To clean the LED strip, gently wipe it with a dry, soft cloth. Do not use abrasive cleaners or immerse the strip in water.
• Storage: If storing the LED strip for an extended period, ensure it is clean and dry. Roll it loosely and store it in a cool, dry place away from direct sunlight.

6. Troubleshooting

• Lights not turning on:
  • Check if the power adapter is securely plugged into both the wall outlet and the LED strip.
  • Ensure the remote control has working batteries and is pointed directly at the receiver.
  • Verify that the power outlet is functional.
• Remote control not responding:
  • Replace the batteries in the remote control.
  • Ensure there are no obstructions between the remote and the LED strip's receiver.
• Inconsistent colors or flickering:
  • Check all connections for looseness.
  • Ensure the power supply is adequate for the length of the LED strip.

7. Specifications