Wildgame Innovations Wraith 2.0 Trail Camera User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Wildgame Innovations Wraith 2.0 Trail Camera. Designed for wildlife monitoring and outdoor surveillance, the Wraith 2.0 captures high-quality images and videos with its advanced features.

This image shows the closed trail camera from the front and side, highlighting its compact design and camouflage pattern.

Safety Information

• Always handle the camera with care to prevent damage.
• Do not expose the camera to extreme temperatures or direct sunlight for prolonged periods.
• Ensure batteries are inserted correctly according to polarity markings. Do not mix old and new batteries, or different types of batteries.
• Keep the camera away from children.
• Dispose of batteries responsibly according to local regulations.

Package Contents

Verify that your package contains the following items:

• Wildgame Innovations Wraith 2.0 Trail Camera (26MP)
• Adjustable Tree Strap with Durable Alligator Clips

Note: AA batteries and an SD card are not included and must be purchased separately.

Setup

1. Battery Installation

1. Open the camera's front cover by releasing the latch.
2. Locate the battery compartment.
3. Insert eight (8) AA batteries into the compartment, ensuring correct polarity (+/-) as indicated.
4. Close the battery compartment securely.

2. SD Card Installation

1. With the camera's front cover open, locate the SD card slot.
2. Insert a compatible SD card (up to 32GB, not included) into the slot with the label facing up until it clicks into place.
3. To remove the SD card, press it gently until it springs out.

This image displays the camera with its front cover open, showing the internal control buttons, LCD screen, and the compartment for AA batteries and the SD card slot.

3. Mounting the Camera

1. Select a suitable location for your camera, such as a tree or post.
2. Thread the adjustable tree strap through the slots on the back of the camera.
3. Securely fasten the strap around the mounting surface using the alligator clips, ensuring the camera is stable and pointed in the desired direction.
4. The camera also features a 1/4-20 threaded insert on the back for use with compatible mounting accessories (not included).

The back of the camera is shown, featuring the adjustable tree strap attachment points and the product information label with model number WGI-WRTH2.

Operating Instructions

1. Powering On/Off

To power on the camera, slide the power switch to the 'ON' position. The LCD screen will illuminate. To power off, slide the switch to 'OFF'.

2. Menu Navigation

Use the control buttons located inside the camera's front cover to navigate the menu:

• SD CARD / EJECT: Used for navigating menu options or ejecting the SD card.
• ENTER: Confirms selections and enters sub-menus.

3. Initial Settings

Upon first use or after battery replacement, you may need to set the following:

• Time and Date: Navigate to the time/date setting and adjust using the navigation buttons. Confirm with ENTER.
• Moon Phase: The camera can display moon phase information. Ensure the time and date are correct for accurate moon phase display.

4. Camera Settings

Access the camera's menu to configure various settings:

• Image Resolution: Set to 26 Megapixels for high-quality still images.
• Video Resolution: Set to 720p HD for video capture. Note that videos are recorded without audio.
• Trigger Speed: The camera features a fast 0.7-second trigger speed. This setting is typically fixed or has limited adjustment options.
• Detection Range: The camera has a detection range of up to 21.3 meters (70 feet).
• Operating Mode: Select between photo, video, or photo+video modes.
• Lightsout Mode: If you have a Lightsout model, this setting controls the invisible infrared flash for night captures.

5. Viewing Captured Media

To view images and videos captured by your Wraith 2.0 Trail Camera:

• On Camera: Use the built-in LCD screen and navigation buttons to review media directly on the camera.
• Via SD Card: Remove the SD card and insert it into a compatible device (e.g., computer, tablet) to view files.
• Using HuntSmart App: The camera supports wireless connectivity. Download the HuntSmart app for smartphones and tablets to manage and view your camera's media.

Download HuntSmart App (iOS) | Download HuntSmart App (Android)

Maintenance

1. Cleaning

• Gently wipe the camera lens and housing with a soft, dry cloth.
• Avoid using abrasive cleaners or solvents.

2. Battery Replacement

Replace all eight AA batteries when the low battery indicator appears on the LCD screen to ensure continuous operation.

Troubleshooting

• Camera Not Powering On: Ensure batteries are new, correctly inserted, and fully charged. Check that the power switch is in the 'ON' position.
• No Images/Videos Captured: Verify that an SD card is properly inserted and has sufficient free space. Check camera settings to ensure it is in the correct operating mode (photo, video, or both) and that the trigger delay is not set too long.
• Poor Image/Video Quality: Clean the camera lens. Ensure the camera is mounted securely to prevent movement. Check battery levels, as low power can affect performance.
• Solar Panel Compatibility: The Wraith 2.0 is compatible with 12V DC solar panels (not included). Ensure any external solar panel used has a compatible 12V DC jack connector that fits the camera's input port. Some solar packs may have incompatible connectors or voltage outputs.
• Difficulty with Setup/Operation: Refer to the relevant sections of this manual for step-by-step instructions. If issues persist, ensure all components are correctly installed and settings are configured as desired.

Specifications

• Model Name: WGI-WRTH2
• Image Resolution: 26 Megapixels
• Video Resolution: 720p HD (no audio)
• Infrared LEDs: 40 (940nm, nearly invisible)
• Detection Range: 21.3 meters (70 feet)
• Trigger Speed: 0.7 seconds
• Power Source: 8 AA batteries (not included) or 12V DC jack (solar panel compatible, not included)
• Image Format: 16:9
• Special Feature: Night Vision
• IP Rating: IP54
• Connectivity: Wireless (Wi-Fi)
• Compatible Devices: Smartphone, tablet, laptop, desktop, digital video recorder
• GTIN / UPC: 888151039847

Warranty Information

Wildgame Innovations products are designed for durability and performance. For specific warranty terms and conditions, please refer to the official Wildgame Innovations website or contact their customer support directly. Retain your proof of purchase for any warranty claims.

Support

For further assistance, technical support, or to inquire about accessories, please visit the official Wildgame Innovations website or contact their customer service department. You can also find additional resources and FAQs on the HuntSmart app support pages.