Flybar FunPark 6V Bumper Car Instruction Manual

1. Introduction

This manual provides essential information for the safe and proper operation and maintenance of your Flybar FunPark 6V Bumper Car. Designed for toddlers aged 1.5 to 4 years and supporting up to 66 pounds, this electric ride-on toy offers 360-degree spinning capabilities and LED lights. Please read this manual thoroughly before initial use and retain it for future reference.

Image 1: Flybar FunPark 6V Bumper Car (Pink/Purple model).

2. Safety Information

For external use only. Adult supervision is required at all times when the bumper car is in use. Ensure the child is securely fastened with the adjustable safety belt before operation. The soft rubber bumper is designed to protect walls and furniture, but caution should still be exercised to prevent collisions with people or fragile objects.

• Always use the adjustable safety belt.
• Operate on flat, dry surfaces only.
• Keep away from stairs, pools, and other hazards.
• Do not allow children to stand on the bumper car during operation.
• Regularly inspect the bumper car for any damage or loose parts.

Image 2: The bumper car features a soft bumper designed to protect household surfaces.

3. What's in the Box

Your Flybar FunPark 6V Bumper Car package includes:

• 1 x Flybar FunPark 6V Bumper Car (ride on)
• 1 x Rechargeable 6V Battery (pre-installed)
• 1 x 120V Wall Charger
• Instruction Manual (this document)

4. Setup

4.1 Assembly

The Flybar FunPark 6V Bumper Car comes fully assembled. The only required step before initial use is to connect the pre-installed 6V battery.

4.2 Battery Connection

1. Locate the battery compartment, typically under the seat.
2. Connect the battery terminals as indicated in the compartment.
3. Secure the battery compartment cover.

Image 3: The charging port is located near the seat for easy access.

4.3 Initial Charging

Before the first use, ensure the battery is fully charged. Connect the provided 120V wall charger to the charging port on the bumper car. Charge the battery for 8-12 hours for optimal performance. The battery recharges overnight.

Image 4: Important charging instructions for the bumper car battery.

5. Operating Instructions

5.1 Power On/Off

Locate the power switch, usually near the charging port. Flip the switch to the "ON" position to activate the bumper car. Flip it to "OFF" when not in use to conserve battery.

5.2 Driving Controls

The bumper car is controlled using dual joysticks located on either side of the seat.

• Forward: Push both joysticks forward simultaneously.
• Backward: Pull both joysticks backward simultaneously.
• Turn Left: Push the right joystick forward while keeping the left joystick neutral or pulling it back slightly.
• Turn Right: Push the left joystick forward while keeping the right joystick neutral or pulling it back slightly.
• 360-Degree Spin: Push one joystick forward and pull the other joystick backward to initiate a spin.

Image 5: The bumper car is capable of 360-degree spins for dynamic play.

5.3 Speed and LED Lights

The bumper car operates at a maximum speed of 1 MPH. It features colorful flashing LED lights around the base, which activate during operation, enhancing the play experience.

6. Maintenance

6.1 Charging the Battery

To maintain battery life and performance, charge the 6V battery regularly. Plug the charger into a standard 120V outlet and connect it to the bumper car's charging port. A full charge typically takes 8-12 hours. Avoid overcharging or completely draining the battery.

6.2 Cleaning

Wipe the bumper car with a damp cloth to clean surfaces. Do not use harsh chemicals or abrasive cleaners. Ensure the charging port and electrical components remain dry.

6.3 Storage

Store the bumper car in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is fully charged before storage and recharge it every few months to prevent deep discharge.

7. Troubleshooting

• Car not moving:
  • Check if the power switch is in the "ON" position.
  • Ensure the battery is properly connected and fully charged.
  • Verify that both joysticks are being operated correctly (e.g., both forward for forward movement).
• LED lights not working:
  • Ensure the car is powered on.
  • Check for any visible damage to the light strip.
• Reduced performance/speed:
  • The battery may need recharging.
  • Ensure the car is not overloaded beyond the 66-pound weight limit.
  • Operating on uneven or soft surfaces can reduce speed.

If issues persist after attempting these troubleshooting steps, please contact Flybar customer support.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Flybar customer service directly. Keep your purchase receipt as proof of purchase.