OtterBox All Day Case User Manual

Introduction

The OtterBox All Day Case is designed to provide robust protection for your Apple Watch Series 7, 8, or 9 (45mm). This case features a smooth bumper that guards the display, edges, and crown against impacts, slams, and scrapes, ensuring your device remains protected during daily use.

Compatibility

This case is specifically designed for and compatible with the following Apple Watch models (45mm ONLY):

• Apple Watch Series 9 (45mm)
• Apple Watch Series 8 (45mm)
• Apple Watch Series 7 (45mm)

Features

• Smooth bumper guards display, edges, and crown.
• Precision-fit design ensures the case stays on securely under impact.
• Sleek design complements the aesthetic of your Apple Watch.
• All Apple Watch features and functions work seamlessly with the case installed.
• Lasting antimicrobial technology helps protect the case exterior against many common bacteria.

Materials

The OtterBox All Day Case is constructed from durable:

• Polycarbonate

Setup and Installation

Follow these steps to properly install your OtterBox All Day Case onto your Apple Watch:

1. Prepare Your Watch: Ensure your Apple Watch is clean and free of dust or debris.
2. Position the Case: Hold the OtterBox case with the button cutouts aligned with your Apple Watch's buttons.
3. Insert the Watch: Gently press your Apple Watch into the case, starting from one side, ensuring it snaps securely into place. Apply even pressure around the edges until the watch is fully seated within the case.

Operating Your Apple Watch with the Case

The OtterBox All Day Case is designed to allow full functionality of your Apple Watch. All buttons, the digital crown, and the display remain fully accessible and responsive. The case does not interfere with wireless charging.

Maintenance

To keep your OtterBox All Day Case clean and in optimal condition:

• Wipe the case regularly with a soft, damp cloth.
• For stubborn dirt, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners.
• Ensure the case and your Apple Watch are completely dry before reassembling.

Troubleshooting

Case Fit Issues

If the case does not seem to fit correctly or feels loose:

• Ensure you have the correct case size for your Apple Watch (45mm).
• Remove the case and re-install it, ensuring the watch is fully seated and all edges are snapped into place.

Button or Digital Crown Responsiveness

If buttons or the digital crown are not responding as expected:

• Check for any debris or foreign objects lodged between the case and the watch.
• Ensure the case is properly aligned and not obstructing the buttons or crown.

Specifications

Warranty and Support

OtterBox products are known for their quality and durability. For information regarding product warranty, returns, or technical support, please refer to the official OtterBox website or contact their customer service directly. Keep your proof of purchase for any warranty claims.