Chicco E-Motion Auto-Glider & Bouncer User Manual

Introduction

Thank you for choosing the Chicco E-Motion Auto-Glider & Bouncer. This product is designed to provide a comforting and engaging experience for your baby, offering both automated gliding motion and a traditional bouncer mode. Please read this manual thoroughly before assembly and use to ensure safe operation and proper maintenance of your product.

Image: The Chicco E-Motion Auto-Glider & Bouncer in its assembled form, featuring a grey fabric seat and a white base.

Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Always use the restraint system. Ensure the 3-point harness is securely fastened around your child.
• Never leave child unattended.
• Do not use the bouncer once your child can sit up unaided or weighs more than 20 lbs (9 kg), whichever comes first. The recommended weight range for this product is 5-20 lbs.
• Do not use this product if it is damaged or broken.
• Never use this bouncer on an elevated surface (e.g., a table). Always use on the floor.
• Do not move or lift the bouncer with the child in it.
• Keep away from open flames and other sources of strong heat.
• Ensure all components are correctly assembled and secured before each use.
• Adult assembly required. Keep small parts away from children during assembly.

Package Contents

Please verify that all components are present before beginning assembly:

• Chicco E-Motion Auto-Glider & Bouncer Unit (1)
• AC Power Adapter (1)
• Instruction Manual (This document)

Note: 4 AA batteries are required for battery operation and are not included.

Setup

1. Unfolding the Unit: Carefully unfold the bouncer frame until it locks into its open position. Ensure all locking mechanisms are engaged.
2. Attaching the Seat Pad: If the seat pad is not pre-attached, secure it to the frame according to the diagrams provided in the separate assembly guide (if applicable). Ensure the harness straps are correctly threaded through the designated slots.
3. Power Connection:
   • AC Power: Connect the provided AC power adapter to the designated port on the bouncer base and plug it into a standard wall outlet.
   • Battery Power: Locate the battery compartment on the base of the unit. Insert 4 AA batteries, ensuring correct polarity. Close the battery compartment securely. The bouncer can operate for approximately 15 hours on battery power.
4. Positioning: Place the bouncer on a flat, stable, and level surface away from edges, stairs, and heat sources.

Image: The Chicco E-Motion Auto-Glider & Bouncer shown folded flat, demonstrating its easy storage capability.

Operating Instructions

The Chicco E-Motion Auto-Glider & Bouncer offers two primary modes of operation:

1. Auto-Glider Mode

This mode provides a gentle, automated side-to-side gliding motion that mimics a parent's soothing sway.

• Activating Gliding: Press the power button on the base of the unit to turn on the auto-glider function.
• Timer Function: The glider operates with a 10-minute timer for uninterrupted movement.
• Motion-Sensing Technology: The bouncer features advanced motion-sensing technology. If the baby's movement is detected or a gentle nudge is applied, the timer will automatically restart, extending the gliding session.

Image: A baby happily seated in the bouncer, with arrows illustrating the side-to-side gliding motion. This feature can be powered by plug-in or battery.

Image: A baby in the bouncer, highlighting the motion-sensing technology that resumes gliding when the baby's movement is detected.

2. Standard Bouncer Mode

In this mode, the bouncer functions as a traditional bouncer, allowing your baby's natural movements to create the bouncing action.

• Switching Modes: To use as a standard bouncer, ensure the auto-glider function is turned off. The bouncer will then respond to your baby's natural wiggles and kicks.

Maintenance

Regular cleaning and maintenance will help prolong the life of your Chicco E-Motion Auto-Glider & Bouncer.

• Seat Pad Cleaning: The seat pad is machine-washable. Refer to the care label on the fabric for specific washing instructions. Typically, use cold water on a gentle cycle and air dry.
• Frame Cleaning: For the frame and plastic components, spot clean only using a damp cloth and mild soap. Do not immerse the base unit in water.
• Storage: When not in use, the bouncer can be folded flat for convenient storage. Store in a cool, dry place away from direct sunlight.

Image: A close-up view of the bouncer's seat pad, emphasizing its soft, organic cotton fabric, which is machine-washable for easy cleaning.

Troubleshooting

If you encounter issues with your Chicco E-Motion Auto-Glider & Bouncer, please refer to the following common solutions:

If the problem persists after trying these solutions, please contact Chicco Customer Support for further assistance.

Specifications

Image: The Chicco E-Motion Auto-Glider & Bouncer with its key dimensions (length, width, height) clearly indicated.

Warranty and Support

For detailed warranty information, please refer to the warranty card included with your purchase or visit the official Chicco website. Keep your proof of purchase for warranty claims.

If you require further assistance, have questions about product use, or need to report a defect, please contact Chicco Customer Support:

• Website: www.chicco.com
• Customer Service: Refer to the website for contact numbers and hours of operation specific to your region.