1. Setup
Before operating your Symphony Aeris Diamante Plus Evaporative Air Cooler, please follow these simple setup steps to ensure optimal performance and safety.
Figure 1: Four easy steps for initial setup and operation.
- Unpacking: Carefully remove the cooler from its packaging. Inspect for any damage.
- Positioning: Place the cooler on a flat, stable surface. For best results, position it near an open window or door to allow for cross-ventilation, which is essential for evaporative cooling.
- Add Water: Fill the 18-liter water tank with clean, fresh water. The water level indicator will help you monitor the water level. Do not overfill.
- Connect Power: Plug the power cord into a standard 230V AC electrical outlet.
Figure 2: Water tank with 18-liter capacity and visible water level indicator.
The unit is designed for easy transportation with its practical and lightweight design, featuring wheels for mobility.
Figure 3: The cooler's design emphasizes easy portability.
2. Operating Instructions
Your Symphony Aeris Diamante Plus Evaporative Air Cooler is designed to provide efficient and personal cooling for areas up to 20 square meters, suitable for both indoor and outdoor environments.
Figure 4: The Aeris Diamante Plus cooler generating cool airflow.
- Power On/Off: Use the power knob to turn the unit on or off.
- Fan Speed: Select from 3 available fan speeds (Low, Medium, High) to adjust the airflow intensity to your preference. This unit provides powerful airflow for ideal cooling.
- Oscillation: Activate the oscillation feature for wide-angle air distribution, ensuring effective cooling across a larger area. The cooler is designed to cover up to 20 square meters.
Figure 5: Wide-angle oscillation for effective air distribution.
The evaporative cooling process transforms hot, dry air into a fresh breeze, providing comfort in warm conditions.
Figure 6: Illustration of the air transformation process.
This model is designed for personal cooling and operates with a low noise level, ensuring a tranquil environment.
Figure 7: The cooler's quiet operation for undisturbed comfort.
3. Maintenance
Regular maintenance ensures the longevity and efficient performance of your evaporative air cooler. Always unplug the unit before performing any maintenance.
Figure 8: Key components for maintenance, including filters and water tank.
- Water Tank Cleaning: Regularly drain and clean the 18-liter water tank to prevent mold and mildew growth. Use the drainage plug located at the bottom of the tank for easy emptying.
- Filter Cleaning: The cooler is equipped with high-efficiency filters and pre-filters for dust. Periodically remove and clean these filters according to the instructions in the full manual (not provided here). Clean filters ensure clean air output and efficient cooling.
- Exterior Cleaning: Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: If storing the unit for an extended period, ensure the water tank is completely empty and dry, and the filters are clean. Store in a cool, dry place.
4. Troubleshooting
This section provides solutions to common issues you might encounter with your Symphony Aeris Diamante Plus Evaporative Air Cooler.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit is noisy | Unit not level; fan obstruction; pump issue. | Ensure the unit is on a flat, stable surface. Check for any foreign objects obstructing the fan blades. If noise persists, contact customer support. |
| Water consumption is high | Normal operation for evaporative coolers; low humidity. | This is typical for evaporative coolers as they use water to cool the air. Ensure the tank is refilled regularly. |
| Unusual odor (e.g., burning plastic) | New unit odor; dust accumulation; motor issue. | A slight odor may occur during initial use. Ensure good ventilation. If the odor persists or is strong, immediately unplug the unit and contact customer support. |
| No cooling effect | Low water level; clogged filters; pump not working. | Check water level and refill if necessary. Clean or replace filters. Ensure the water pump is submerged and functioning. |
5. Specifications
Detailed technical specifications for the Symphony Aeris Diamante Plus Evaporative Air Cooler.
Figure 9: Product dimensions for the Aeris Diamante Plus.
| Feature | Detail |
|---|---|
| Manufacturer | Symphony |
| Model Number | Aeris Diamante Plus |
| Color | Gray |
| Material | Plastic |
| Voltage | 230 Volts (AC) |
| Wattage | 230 watts |
| Water Tank Capacity | 18 Liters |
| Coverage Area | Up to 20 square meters |
| Dimensions (L x W x H) | 44.5 x 53.5 x 60 cm |
| Weight | 12.68 Kilograms |
| Mounting Type | Freestanding |
| Special Features | Energy Saving, High-Efficiency Filters, Oscillation |
6. Warranty and Support
Your Symphony Aeris Diamante Plus Evaporative Air Cooler comes with a manufacturer's warranty, details of which can typically be found in the product packaging or on the manufacturer's official website. Please retain your proof of purchase for warranty claims.
For extended protection, additional warranty plans may be available from your retailer. These plans can offer coverage beyond the standard manufacturer's warranty for 2, 3, or 4 years.
For technical support, troubleshooting assistance, or warranty inquiries, please contact Symphony customer service through their official website or the contact information provided at the point of purchase. When contacting support, please have your model number (Aeris Diamante Plus) and purchase details ready.
