1. Introduction
This manual provides detailed instructions for the Smartby Universal Remote Control, designed as a direct replacement for Element LCD and LED televisions. This remote offers a straightforward, ready-to-use solution without complex programming.
Image 1.1: Front view of the Smartby Universal Remote Control.
2. Key Features
- Universal Compatibility: Specifically designed for Element LCD and LED TVs. Note: This remote is not compatible with Element Fire TV or Element Roku TV models.
- No Setup Required: Ready for immediate use upon battery insertion.
- Durable Construction: Manufactured with high-quality, long-life materials.
- Fast Signal Transmission: Ensures responsive control of your television.
- Infrared Technology: Operates using infrared signals; requires direct line of sight to the TV's IR sensor.
3. Setup and Initial Use
The Smartby Universal Remote Control is designed for immediate use with compatible Element TVs. No programming or pairing is required.
3.1. Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards to open the compartment.
- Insert two (2) AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Image 3.1: Front and back view of the remote, highlighting the battery compartment.
3.2. First Use
Once batteries are installed, the remote is ready to operate your Element TV. Point the remote directly at the television's infrared sensor for optimal performance.
4. Operating the Remote Control
The remote control features standard buttons for navigating your Element TV. Familiarize yourself with the button layout:
Image 4.1: Angled view of the remote control, displaying all buttons.
4.1. Button Functions
| Button | Function |
|---|---|
| Power | Turns the TV on or off. |
| Mute | Mutes or unmutes the TV audio. |
| 0-9 (Number Buttons) | Direct channel selection. |
| SOURCE | Cycles through input sources (HDMI, AV, etc.). |
| CH +/- | Changes TV channels up or down. |
| VOL +/- | Adjusts TV volume up or down. |
| MENU | Accesses the TV's main menu. |
| OK / Navigation Arrows | Navigates through menus and confirms selections. |
| EXIT | Exits the current menu or function. |
| Playback Controls | Includes Play, Pause, Fast Forward, Rewind, Stop, Previous/Next Track for media playback (if supported by TV). |
| ADD/ERASE, FAV, USB, CC, V-CHIP | Additional functions depending on TV model capabilities. Refer to your TV's manual for specific usage. |
5. Compatibility
This remote control is designed to be compatible with a wide range of Element LCD and LED TV models. It is important to note its limitations:
- DOES NOT WORK FOR ELEMENT FIRE TV
- DOES NOT WORK FOR ELEMENT ROKU TV
Image 5.1: Visual reminder of non-compatibility with Element Fire TV and Roku TV.
5.1. Compatible Element TV Models
The remote is compatible with, but not limited to, the following Element TV models:
- ELCFT194, ELCFW324, ELDFW406, ELCFT262, ELDFW322, ELCFW326, ELCFW329, ELDFT404, ELCFW328, ELDFW464, ELDFT465J, ELDFQ501J, ELEFQ501J, ELGFW601, ELDFW501, ELEFW193, ELEFJ191, ELEFT195, ELEFW195, ELEFS191, ELEFT193, ELEFJ243, ELEFS241, ELEFW264, ELEFT281, ELEFW325, ELEFT326, ELEFS321, ELEFJ321, ELEFQ402, ELEFW401A, ELEFQ462, ELEFW462, ELEFC461, ELEFC463JA, ELEFW705, ELEFQ391J, ELDFT395J, ELEFJ391, ELEFC401, ELDFC551J.
6. Care and Maintenance
To ensure the longevity and optimal performance of your remote control, follow these simple maintenance guidelines:
- Cleaning: Wipe the remote with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution, then wipe dry immediately. Avoid abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the remote's responsiveness decreases or it stops functioning. Always replace both batteries at the same time with new ones of the same type (AAA).
- Storage: Store the remote in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Avoid Drops: Protect the remote from physical impact, as drops can damage internal components.
7. Troubleshooting
If you encounter issues with your Smartby Universal Remote Control, refer to the following common solutions:
- Remote is not responding:
- Ensure batteries are inserted correctly with the correct polarity (+/-).
- Replace old batteries with new AAA batteries.
- Check for any obstructions between the remote and the TV's infrared sensor. Ensure direct line of sight.
- Confirm the remote is pointed directly at the TV's IR sensor.
- Only the Power button works, or other buttons are unresponsive:
- This can sometimes occur due to a temporary signal issue. Remove the batteries from the remote.
- Press and hold the Power button on the remote for approximately 25 seconds to discharge any residual power.
- Reinsert the batteries. Test the remote's functionality.
- Remote does not control my TV:
- Verify that your TV is an Element LCD or LED model.
- Confirm that your TV is NOT an Element Fire TV or Element Roku TV, as this remote is not compatible with those models.
- Ensure the TV is powered on and not in standby mode.
8. Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 7 x 1.8 x 0.7 inches |
| Item Weight | 2.11 ounces |
| Model Number | SMTB-Universal-Element |
| Batteries Required | 2 AAA batteries (not included) |
| Color | Black |
| Special Feature | Universal (for specified Element TVs) |
| Compatible Devices | Element LCD LED Televisions |
| Manufacturer | Smartby |
9. Support
For further assistance or inquiries regarding your Smartby Universal Remote Control, please contact the manufacturer or your point of purchase. Keep your product model number (SMTB-Universal-Element) available when seeking support.
