Introduction
Thank you for choosing the ZEBRONICS Zeb-Bro Wired Earphones. These earphones are designed to provide a comfortable listening experience with clear audio and convenient features. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new earphones.
What's in the Box:
- ZEBRONICS Zeb-Bro Wired Earphones
- User Manual
Figure 1: ZEBRONICS Zeb-Bro Wired Earphones (Green)
Setup
Setting up your Zeb-Bro earphones is straightforward. Follow these steps to begin using your device.
Connecting to Your Device:
- Locate the 3.5mm audio jack on your smartphone, tablet, laptop, or other compatible audio device.
- Insert the 3.5mm connector of the Zeb-Bro earphones firmly into the audio jack of your device.
- Ensure the connection is secure to prevent audio interruptions.
Figure 2: 3.5mm Audio Jack Connection
Wearing the Earphones:
- Gently insert each earbud into the corresponding ear canal (Left earbud into the left ear, Right earbud into the right ear).
- Adjust the earbuds for a comfortable and snug fit. A proper fit helps in achieving optimal sound quality and passive noise isolation.
Figure 3: Proper Earbud Placement for Optimal Sound
Operating Instructions
The Zeb-Bro earphones are designed for simple and intuitive operation.
Audio Playback:
- Once connected, play audio from your device. The earphones will automatically output sound.
- Adjust the volume using your connected device's volume controls.
Figure 4: 10mm Audio Driver for Clear Sound
Call Function:
The in-line microphone allows for hands-free calling.
- Answering/Ending Calls: Press the multi-function button on the in-line remote once to answer an incoming call. Press it again to end an active call.
- Rejecting Calls: Press and hold the multi-function button for approximately 2 seconds to reject an incoming call.
- Playing/Pausing Music: Press the multi-function button once to play or pause music playback.
Figure 5: In-line Microphone and Control Button
Maintenance
Proper care and maintenance will extend the lifespan of your earphones.
Cleaning:
- Wipe the earbuds and cable with a soft, dry, lint-free cloth.
- Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Avoid getting moisture into any openings.
Storage:
- Store the earphones in a clean, dry place when not in use.
- To prevent tangling and damage, coil the cable neatly. The flat, tangle-resistant cable design helps in this regard.
- Avoid extreme temperatures.
Troubleshooting
If you encounter issues with your Zeb-Bro earphones, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or low volume | Loose connection, device volume too low, incorrect audio output setting on device. | Ensure 3.5mm jack is fully inserted. Increase volume on your device. Check device's audio output settings. |
| Microphone not working | Loose connection, device microphone settings, incompatible device. | Ensure 3.5mm jack is fully inserted. Check your device's microphone privacy settings. Test with another compatible device. |
| Sound distortion | Volume too high, damaged cable/earbuds, audio source issue. | Lower the volume. Inspect cable for damage. Try with a different audio source. |
Specifications
Key technical specifications for the ZEBRONICS Zeb-Bro Wired Earphones:
| Feature | Specification |
|---|---|
| Model Name | ZEB-BRO |
| Connectivity Technology | Wired |
| Headphones Jack | 3.5 mm Jack |
| Audio Driver Size | 10 Millimeters |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 16 Ohm |
| Noise Control | Sound Isolation |
| Material | Plastic |
| Cable Length | 3.9 Feet (approx. 1.2 meters) |
| Item Weight | 14 Grams (0.494 ounces) |
| Control Type | Media Control |
| Compatible Devices | Laptops, Mobile Phones, Tablets, PC, All 3.5mm Jack Devices, iOS, Android, Audio Player |
Warranty and Support
ZEBRONICS provides a warranty for the Zeb-Bro Wired Earphones to ensure your satisfaction.
Warranty Information:
This product comes with a 6-month warranty from the date of purchase. The warranty covers manufacturing defects. Please retain your purchase receipt as proof of purchase for warranty claims.
Customer Support:
For any technical assistance, warranty claims, or product-related inquiries, please contact ZEBRONICS customer support through their official website or the contact information provided with your purchase documentation.
For more information, visit the official ZEBRONICS website: www.zebronics.com
