Product Overview
The ANLAN IPL Hair Removal Device is designed for effective and convenient hair removal at home. It utilizes Intense Pulsed Light (IPL) technology to target hair follicles and reduce hair growth over time. This device is suitable for various body areas, including the face and VIO line, and offers multiple intensity levels and operating modes for a personalized experience.
The device comes with two flash heads: a larger 3cm² head for body areas like arms, underarms, thighs, and shins, and a smaller 1cm² head for delicate areas such as the face and VIO line.
Important Safety Information
Read all safety warnings before use to prevent injury or damage to the device.
- Do not use on the scalp, eyebrows, or directly around the eyes.
- Avoid using on areas with tattoos or permanent makeup.
- Do not use if you have a history of skin cancer or have suspicious moles or skin lesions.
- Use only with an AC power supply of 100-240V.
- Do not damage, forcibly bend, pull, twist, bundle, place near high temperatures, place heavy objects on, pinch, or modify the power cord.
- Do not immerse the device in water or spray water on it.
- Always switch off the device and unplug it from the power outlet before cleaning.
- Always wear the provided protective eyewear during operation to protect your eyes from the intense light.
Setup
- Patch Test: Before your first full treatment, perform a patch test on a small, inconspicuous area of your skin according to the instructions in this manual to check for any adverse reactions.
- Prepare Skin: Ensure the hair in the treatment area is shaved to a length of 5mm or less. Cleanse the skin and ensure it is dry and free from any lotions, creams, or deodorants.
- Connect Power: Firmly insert the adapter plug into the socket at the bottom of the main unit, then plug the adapter into a power outlet.
- Wear Protective Eyewear: Put on the provided protective glasses before turning on the device.
Operating Instructions
- Power On: Press and hold the power button to turn on the device. The default intensity level upon startup is Level 1.
- Adjust Intensity Level: Short press the power button to cycle through the intensity levels (1-5, then 5-1). Select a level appropriate for your skin tone and comfort.
- Select Mode: Press and hold the flash button to switch between Basic Flash Mode (single flash) and Automatic Continuous Flash Mode (multiple flashes).
- Apply to Skin: Place the flash window firmly and vertically against your skin. Ensure full contact for the skin detection sensor to activate.
- Begin Treatment: Once skin detection is complete, press the flash button (in Basic Flash Mode) or glide the device over the skin (in Automatic Continuous Flash Mode) to begin the hair removal process. Move the device slowly and systematically across the treatment area.
The device features 5 adjustable intensity levels (1-5) and two modes: Basic Flash Mode and Automatic Continuous Flash Mode, allowing customization for different skin sensitivities and treatment areas.
The ANLAN IPL Hair Removal Device is suitable for use on multiple body areas, including the face, underarms, arms, legs, and bikini line, providing comprehensive hair removal.
The device is designed for easy home use by both men and women, offering a cost-effective alternative to salon treatments.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your device.
- Always ensure the device is switched off and unplugged from the power source before cleaning.
- Wipe the flash window and the device body with a soft, dry cloth after each use.
- Do not use abrasive cleaners, alcohol, or harsh chemicals, as these can damage the device.
- Store the device in a cool, dry place, away from direct sunlight and moisture.
Troubleshooting
If you encounter any issues with your ANLAN IPL Hair Removal Device, please refer to the following general advice:
- Device not turning on: Ensure the power adapter is securely connected to both the device and a working power outlet.
- No flash: Make sure the flash window is in full, vertical contact with your skin. The device has a skin detection sensor that prevents flashing if not properly applied. Check the selected intensity level.
- Discomfort during use: Reduce the intensity level. If discomfort persists, discontinue use and consult a healthcare professional.
- For other issues, please contact ANLAN customer support for assistance.
Specifications
| Brand | ANLAN |
| Model | B09R1XZ643 |
| Color | White |
| Product Weight | 200 grams |
| Product Dimensions (LxWxH) | 17 x 6 x 4 cm |
| Features | Hair removal, unwanted hair care |
| Included Components | Adapter, razor, protective glasses |
| Unit Count | 1 |
This image illustrates the hair reduction process over time, showing less visible hair after 4 and 8 weeks of consistent use. The device offers up to 990,000 flashes for long-term use.
Warranty and Support
Your ANLAN IPL Hair Removal Device comes with a one-year warranty from the date of purchase.
If you experience any defects or issues with the product within 365 days of purchase, please contact us through your order inquiry page. We will assess the issue and arrange for a new product delivery or exchange at our discretion.
For any questions or further assistance, please refer to the contact information provided with your purchase or on the official ANLAN website.
