1. Introduction
The FEELWORLD KBC10 is a professional PTZ camera controller designed for precise and intuitive control of multiple cameras in various environments such as live streaming, church services, and conferences. It features a 4D joystick for smooth camera movement, a comprehensive keyboard for quick operations, and an LCD screen for real-time status display. The controller supports multiple network and serial protocols, including IP VISCA, ONVIF, VISCA, and PELCO, allowing for flexible integration with a wide range of PTZ cameras. Power over Ethernet (PoE) support simplifies installation by enabling power and data transmission through a single cable.
2. Setup
2.1. Connection
To ensure proper communication, the KBC10 controller and all PTZ cameras must be connected to the same Local Area Network (LAN). Additionally, their IP addresses must reside within the same network segment. It is recommended to connect all devices to a network router or switch via Ethernet cables. Once connected, power on all devices.
2.2. IP Setting
After connecting the devices, configure the IP settings on the controller to recognize your cameras:
- Press the IP button on the controller.
- Enter the IP address of the first PTZ camera using the numeric keypad.
- Press the ENTER button to confirm the IP address.
- The display will prompt for the port number. Enter the port number (e.g., 1259) for your PTZ camera. Refer to your PTZ camera's user manual for the correct port number.
- Press ENTER to confirm the port number.
- The display will prompt for the camera number. Enter 1 for the first camera.
- Press ENTER to confirm.
- A "Success" message on the LCD screen indicates that the controller has successfully identified the PTZ camera.
- Repeat these steps to add additional cameras (Camera 2, Camera 3, etc.) to your KBC10 controller.
Video 2.1: This video demonstrates the connection and IP setting process for the FEELWORLD KBC10 PTZ Camera Controller, showing how to link the controller to PTZ cameras on a network and configure their IP addresses for control.
3. Operating the Controller
3.1. Joystick Control
The 4D joystick provides precise control over camera pan, tilt, and zoom functions:
- To select a camera, press the corresponding CAM 1, CAM 2, CAM 3, or CAM 4 button.
- Move the joystick up, down, left, or right to control the camera's pan and tilt movements.
- Rotate the joystick clockwise to zoom in (Tele) and counter-clockwise to zoom out (Wide).
- Alternatively, use the dedicated T-ZOOM-W rocker switch on the panel for zoom control. Push towards T for Tele (zoom in) and towards W for Wide (zoom out).
3.2. Button Description
The KBC10 controller features various buttons and knobs for specific camera functions:
- AUTO FOCUS / AE AUTO: These buttons set the camera to automatic focus or automatic aperture mode. The corresponding indicator light will illuminate when the camera is in manual focus or manual aperture mode, respectively.
- NEAR / FAR FOCUS: Use these knobs to manually adjust the focal length.
- OPEN / CLOSE IRIS: Use these knobs to manually adjust the aperture (OPEN for Aperture Plus, CLOSE for Aperture Minus).
- R / B Adjustment: The knobs on the right allow for manual adjustment of Red Gain (R) and Blue Gain (B) for color balance.
- PTZ SPEED: Rotate this knob to adjust the PTZ movement speed, typically from 1 (slow) to 8 (fast).
- F1 & F2: Two custom function buttons that can be configured for specific actions in IP VISCA & VISCA protocols.
- SETUP: Access controller local settings.
- SEARCH: Search for available devices using ONVIF protocol on the LAN (ONVIF Mode only).
- INQUIRE: Check added devices.
- WBC MODE: Set the camera to auto white balance mode. The indicator light will illuminate when the camera is in manual white balance mode.
- CAM 1 ~ CAM 4: Quickly switch between devices (ONVIF, IP VISCA) or address codes (VISCA, PELCO).
- PRESET: Short press to set presets; long press to delete presets. Works with number keys and ENTER.
- CALL: Call a preset number. Works with number keys and ENTER.
- IP: Manually add network devices (ONVIF and IP VISCA modes only).
- CAM: In IP VISCA and ONVIF modes, switches to the CAM NUM bound device. In VISCA and PELCO modes, switches to the address code when entering a certain address. Works with number keys and ENTER.
- ESC: Return.
- ENTER: Confirm Button.
- 0 ~ 9: Numeric keys also serve as direction keys for pan and tilt rotation, and camera OSD control.
4. Specifications
| Feature | Description |
|---|---|
| Compatible Devices | Camera |
| Controller Type | Button Control, Joystick Control |
| Connectivity Technology | Wired (Ethernet, RS232, RS422) |
| Additional Features | PoE Support, LCD Screen, Custom Function Buttons (F1 & F2) |
| Protocols Supported | IP VISCA, ONVIF, VISCA, PELCO |
| Max Cameras Supported | Up to 255 PTZ cameras (via IP VISCA and ONVIF) |
| Power Source | Power Adapter, PoE (Power over Ethernet) |
| Model Name | KBC10 |
| Brand Name | FEELWORLD |
| Color | Black |
5. Maintenance
To ensure the longevity and optimal performance of your FEELWORLD KBC10 PTZ Camera Controller, follow these general maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the surface of the controller. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the device. Avoid abrasive cleaners or solvents.
- Storage: Store the controller in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Handling: Handle the joystick and buttons gently to prevent wear and tear. Avoid dropping the device or subjecting it to strong impacts.
- Cable Management: Ensure all cables are properly routed and secured to prevent accidental disconnections or damage.
6. Troubleshooting
If you encounter issues with your KBC10 controller, consider the following troubleshooting steps:
- No Camera Control:
- Verify that the controller and cameras are on the same LAN and have IP addresses in the same segment.
- Check all network cable connections.
- Ensure the correct IP address and port number are entered for each camera on the controller.
- Confirm that the camera is powered on and functioning independently.
- LCD Screen Not Displaying:
- Check the power connection to the controller.
- Ensure the power adapter is correctly plugged into a working outlet.
- Intermittent Control:
- Check for network congestion or interference.
- Ensure the controller's firmware is up to date (refer to the manufacturer's website for updates).
- Buttons/Joystick Unresponsive:
- Restart the controller and the affected camera(s).
- Ensure no debris is obstructing the buttons or joystick movement.
If problems persist after attempting these steps, please contact FEELWORLD customer support for further assistance.
7. Warranty and Support
FEELWORLD products typically come with a standard manufacturer's warranty. For specific details regarding the warranty period and coverage for your KBC10 PTZ Camera Controller, please refer to the warranty card included in your product packaging or visit the official FEELWORLD website. For technical support, troubleshooting assistance, or service inquiries, please contact FEELWORLD customer support through their official channels. Keep your purchase receipt and product serial number handy when contacting support.