DSP Bald Shaver 60111-gold User Manual

Introduction

Thank you for choosing the DSP Bald Shaver 60111-gold. This 2-in-1 electric razor is designed for efficient and comfortable shaving of the head, face, and body. It features a precision trimmer, three-speed settings, an LED digital display, and a travel lock function. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Safety Information

Important Safety Instructions:

• Do not push the shaver head or press hard against the skin. Use gentle, even pressure.
• Do not use the shaver near water or while it is charging. Ensure hands are dry when handling.
• Always follow proper cleaning and care instructions to prevent bacterial growth and maintain hygiene.
• Keep out of reach of children.
• Do not disassemble or attempt to repair the shaver yourself. Contact customer support for assistance.
• Store the shaver in a dry place when not in use.

Package Contents

Verify that all items are present in the package:

• 1 x DSP Electric Shaver (Model 60111-gold)
• 1 x Protection Cap
• 1 x Cleaning Brush
• 1 x USB Charging Cable
• 1 x User Instruction Manual

Product Features

Image: The shaver's LED display showing speed (RPM) and remaining battery percentage, with buttons for power and speed adjustment.

Image: The shaver's back with a pop-up precision trimmer for detailed grooming.

• Foil Shaver: Designed for close shaving of dense, short, and thick hair. The ultra-thin blade mesh pre-trims longer hairs for a smooth finish.
• Precision Trimmer: An integrated side-knife (pop-up trimmer) for detailing sideburns, necklines, and other areas.
• 3-Adjustable Speeds: Select from three different speed settings (e.g., 6500 RPM, 7000 RPM, 7500 RPM) to match hair thickness and length.
• LED Digital Display: Clearly shows the current speed (RPM) and remaining battery power percentage.
• Travel Lock Function: Prevents accidental activation during travel.
• Safety Protections: Includes low-voltage protection and locked-rotor protection for enhanced durability and user safety.
• Long Battery Life: Provides over 120 minutes of usage time on a 2-hour fast charge.

Setup

Initial Charging

Image: The shaver being charged via a USB cable, indicating compatibility with various USB power sources.

1. Before first use, fully charge the shaver.
2. Connect the USB charging cable to the shaver's charging port and plug the other end into a USB power source (e.g., computer, power bank, USB wall adapter).
3. The LED display will show a charging indicator and the battery percentage increasing.
4. A full charge takes approximately 2 hours, providing over 120 minutes of usage.
5. Do not use the shaver while it is charging.

Operating Instructions

Power On/Off and Speed Adjustment

Image: Detailed view of the shaver's control panel, highlighting the power button and speed adjustment buttons.

1. To turn on the shaver, press the power button (center button). The LED display will illuminate, showing the current speed and battery level.
2. To adjust the speed, press the '+' or '-' buttons located next to the power button. There are three available speed settings.
3. To turn off the shaver, press the power button again.

Shaving Techniques

Image: Demonstrations of the shaver's versatility for shaving bald heads, beards, sideburns, and other body hair.

Image: A man using the DSP Bald Shaver to trim hair on his chest, illustrating its multipurpose design.

• For best results, use the shaver on clean, dry skin. Shaving foam can be used for a smoother experience.
• Move the shaver in small, circular motions or against the direction of hair growth.
• Do not apply excessive pressure; the floating head design adapts to contours for a comfortable shave.
• To use the precision trimmer, slide the trimmer switch upwards. Use the trimmer for shaping sideburns, mustaches, or cleaning up necklines.

Travel Lock Function

Image: A hand demonstrating how to engage the travel lock on the shaver before storing it in a bag.

• To activate the travel lock, press and hold the power button for 3 seconds. The display will indicate that the lock is engaged.
• To deactivate the travel lock, press and hold the power button for 3 seconds again.

Maintenance and Cleaning

Cleaning the Shaver Head

Image: The shaver with its foil head detached, revealing the internal cutting blades and the mechanism to open the cutter head.

Image: A hand using the provided cleaning brush to remove hair residue from the shaver's blades and foil.

1. Ensure the shaver is turned off and unplugged before cleaning.
2. Press the release button to open the cutter head.
3. Use the provided cleaning brush to remove any hair clippings from the foil and the internal blades.
4. For a more thorough cleaning, the foil head can be rinsed under running water. Ensure the shaver body does not get wet. Allow all parts to air dry completely before reassembling.
5. Regular cleaning helps maintain optimal shaving performance and hygiene.

Troubleshooting

If you encounter issues with your DSP Bald Shaver, please refer to the following common solutions:

If the problem persists, please contact DSP customer support.

Specifications

Official Product Video

Warranty and Support

Warranty Information:

• This DSP Bald Shaver comes with a 1-year manufacturer's warranty from the date of purchase.
• The warranty covers defects in materials and workmanship under normal use.
• It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.

Customer Support:

For any questions, concerns, or warranty claims, please contact DSP customer support through the retailer where the product was purchased or refer to the contact information provided in the original packaging.