OKPET Wireless Dog Fence Pet Containment System User Manual

1. Introduction

The OKPET Wireless Dog Fence Pet Containment System is designed to provide a safe and effective boundary for your pet without the need for physical fences. This system utilizes advanced wireless technology to create an adjustable containment area, ensuring your dog stays within designated limits through a combination of vibration and static correction.

Key features include a strong signal penetration capability, allowing the transmitter to be placed anywhere in your home, and an extensive signal transmission range of up to 1,000 feet. The system prioritizes your pet's safety and training by initiating a vibration reminder before any static electric shock, helping your dog learn to return to the safe area effectively.

2. Package Contents

Please verify that all items are present in your package:

• Wireless Transmitter Unit
• Rechargeable Receiver Collar
• Power Adapter for Transmitter
• USB Charging Cable for Receiver Collar
• Test Light Tool
• Long and Short Contact Points (for different coat lengths)
• User Manual

3. Safety Information

Read all instructions before using this product. Failure to follow these instructions could result in injury to your pet or damage to the system.

• Not for Aggressive Dogs: Do not use this product on aggressive dogs. If your dog is aggressive, consult a professional trainer or veterinarian.
• Age and Health: This system is suitable for healthy dogs over 6 months old. Do not use on puppies, old, pregnant, or sick dogs.
• Collar Fit: Ensure the receiver collar fits snugly but not too tightly. It should be comfortable for your dog and allow two fingers to fit between the strap and your dog's neck.
• Skin Irritation: Avoid leaving the collar on your dog for more than 12 hours per day. Check your dog's neck daily for signs of skin irritation or sores. If irritation occurs, discontinue use and consult a veterinarian.
• Supervision: Always supervise your dog during the initial training period and until you are confident they understand the boundary.
• Water Exposure: The receiver collar is water-resistant, but not fully waterproof. Avoid prolonged submersion.
• FCC Certification: This product has passed FCC certification, ensuring it meets safety and performance standards.

4. Setup

4.1 Transmitter Unit Setup

1. Placement: Place the transmitter unit in a central location within your home, ideally on a higher surface, away from large metal objects that could interfere with the signal. The signal transmits outwards from the transmitter.
2. Power Connection: Connect the power adapter to the transmitter unit and plug it into a standard electrical outlet.
3. Adjusting Range: Use the range adjustment dial on the transmitter to set the desired boundary distance. Start with a smaller range and gradually increase it during training. The maximum range is approximately 1,000 feet.
4. Multiple Transmitters (Optional): For very large areas, two transmitters can be used simultaneously in different corners to extend the signal coverage.

4.2 Receiver Collar Setup

1. Charge the Receiver: Before first use, fully charge the receiver collar using the provided USB charging cable. The indicator light will change when fully charged.
2. Attach Contact Points: Select the appropriate contact points (short for short-haired dogs, long for long-haired dogs) and screw them firmly onto the receiver.
3. Fit the Collar: Place the receiver collar around your dog's neck, ensuring the contact points touch the skin. The collar should be snug enough that it doesn't move freely, but loose enough to allow two fingers to slide underneath.

Image 1: Overview of the OKPET Wireless Dog Fence System components.

4.3 Boundary Testing

1. Test the Boundary: With the receiver collar in hand (or on your dog, if testing carefully), walk towards the edge of your desired containment area.
2. Observe Signals: The receiver collar will first vibrate as you approach the boundary. If you continue past the vibration zone, it will then emit a static correction and a continuous sound.
3. Adjust as Needed: Adjust the range dial on the transmitter until the boundary is precisely where you want it. Mark the boundary with flags (not included) for visual cues during training.

5. Operating Instructions

5.1 How the System Works

The OKPET Wireless Dog Fence System operates on a progressive correction principle:

• Vibration Reminder: As your dog approaches the set boundary, the receiver collar will first activate a vibration. This serves as an initial warning.
• Static Correction: If your dog continues past the vibration zone and into the restricted area, the collar will then deliver a mild static electric shock.
• Continuous Reminder: If the dog does not return to the safe area after two cycles of vibration and static correction, the receiver will emit a continuous sound reminder until the dog re-enters the safe zone. This reinforces the need to stay within the boundary.

5.2 Training Your Pet

Effective training is crucial for your dog to understand and respect the wireless boundary. This process typically takes 1-2 weeks.

1. Introduce the Collar: Let your dog wear the receiver collar for a few days without activating the system, allowing them to get used to it.
2. Boundary Flags: Place boundary flags (not included) around the perimeter where the vibration warning begins.
3. Leash Training: On a leash, walk your dog towards the boundary flags. When the collar vibrates, gently pull your dog back into the safe zone, praising them. Repeat this several times.
4. Reinforce: If your dog receives a static correction, immediately guide them back to the safe area and offer praise. Never punish your dog for receiving a correction; instead, teach them how to avoid it.
5. Gradual Independence: Once your dog consistently respects the boundary on a leash, gradually allow them off-leash within the safe area, always supervising closely.

6. Maintenance

• Clean the Collar: Regularly clean the receiver collar and contact points with a damp cloth to prevent dirt buildup and ensure proper contact with your dog's skin.
• Check for Irritation: Daily inspect your dog's neck for any signs of redness, sores, or irritation. If found, remove the collar and consult a veterinarian.
• Battery Life: Monitor the battery indicator on the receiver collar and recharge as needed.
• Transmitter Placement: Ensure the transmitter remains in a stable, central location and is not obstructed by new furniture or appliances.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information, technical support, or any questions regarding your OKPET Wireless Dog Fence Pet Containment System, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for warranty claims.