1. Introduction
Thank you for choosing the ASKO W2084 8KG Washing Machine. This manual contains important information regarding the installation, operation, and maintenance of your appliance. Please read it thoroughly before using the washing machine to ensure safe and optimal performance. Keep this manual for future reference.
2. Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury to persons.
- Ensure the appliance is properly grounded.
- Do not operate the washing machine if it is damaged or malfunctioning.
- Keep children and pets away from the appliance during operation.
- Do not wash items that have been soiled with flammable substances.
- Unplug the appliance before cleaning or performing any maintenance.
3. Setup and Installation
Proper installation is crucial for the performance and longevity of your washing machine. It is recommended that installation be performed by a qualified technician. Please note that installation and setup work for this product should be arranged by the customer.
3.1 Unpacking
Carefully remove all packaging materials. Inspect the appliance for any damage incurred during transit. Retain packaging materials for future transport if needed.
3.2 Location and Leveling
Place the washing machine on a firm, level surface. Ensure there is adequate space around the appliance for ventilation and connections. Use a spirit level to check that the machine is perfectly level, adjusting the feet as necessary to prevent vibrations during operation.
Dimensions: W595 x D580 x H850 mm
Figure 3.1: Front view of the ASKO W2084 8KG Washing Machine, showcasing its compact design suitable for various installations.
3.3 Water and Electrical Connections
Connect the water inlet hose to a cold water tap and the drain hose to a suitable drain. Ensure all connections are secure to prevent leaks. Plug the power cord into a grounded electrical outlet. Refer to the appliance's rating label for specific electrical requirements.
4. Operating Instructions
This section guides you through the daily operation of your ASKO W2084 washing machine.
4.1 Control Panel Overview
The washing machine features a user-friendly control panel with a knob for program selection and buttons for additional functions. The display provides information on the selected program and cycle status.
Figure 4.1: Close-up view of the control panel, showing the program display and control knob.
4.2 Loading Laundry
Open the washing machine door and load laundry loosely into the drum. Do not overload the machine; ensure there is enough space for the clothes to tumble freely. The maximum capacity is 8 KG.
Figure 4.2: The interior of the washing machine drum, designed for efficient and gentle washing.
4.3 Adding Detergent
Add the appropriate amount of detergent and fabric softener to their respective compartments in the dispenser drawer. Refer to the detergent packaging for recommended dosages.
4.4 Selecting a Program
Turn the program selection knob to choose one of the 14 available washing programs. Programs include options for various fabric types and soil levels. The machine supports washing at temperatures up to 95°C for thorough cleaning.
Figure 4.3: An illustration demonstrating different water levels, indicative of the machine's water usage and efficiency across various cycles.
4.5 Starting and Stopping a Cycle
Press the Start/Pause button to begin the selected washing cycle. To pause a cycle, press the button again. To cancel a cycle, refer to the specific instructions in the full manual or hold the Start/Pause button for a few seconds.
5. Maintenance
Regular maintenance ensures the longevity and efficiency of your washing machine.
5.1 Cleaning the Drum
Periodically run a maintenance wash cycle (e.g., a hot wash with no laundry and a small amount of detergent or a specialized washing machine cleaner) to prevent odor and residue buildup in the drum.
Figure 5.1: The washing machine drum with the door open, showing the clean interior ready for maintenance or use.
5.2 Cleaning the Detergent Dispenser
Remove the detergent dispenser drawer and rinse it under warm water to remove any detergent or softener residue. Clean the housing of the dispenser drawer with a brush.
5.3 Cleaning the Exterior
Wipe the exterior surfaces of the washing machine with a soft, damp cloth. Do not use abrasive cleaners or solvents.
6. Troubleshooting
Before contacting service, please check the following common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | No power; Door not closed properly; Program not selected. | Check power supply; Ensure door is latched; Select a program and press Start. |
| Water not filling | Water tap closed; Inlet hose kinked; Water pressure too low. | Open water tap; Straighten hose; Check household water pressure. |
| Excessive vibration/noise | Machine not level; Transit bolts not removed; Uneven load. | Adjust leveling feet; Remove transit bolts (if applicable); Redistribute laundry. |
| Water leakage | Hoses loose; Detergent overdose; Drain filter clogged. | Tighten hose connections; Use less detergent; Clean drain filter. |
7. Specifications
- Brand: ASKO
- Model: W2084
- Capacity: 8 KG
- Dimensions (W x D x H): 595 x 580 x 850 mm
- Weight: 76.5 Kilograms
- Control Type: Knob
- Standard Cycles: 14
- Max Wash Temperature: 95°C
- Door Position: Top (This seems to be a mistranslation from the original data, as the image clearly shows a front-loading machine. Assuming 'Top' refers to the control panel or access point for detergent, or it's an error in the source data. For a front-loader, the door is front-facing.)
8. Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product or contact the manufacturer directly. This product is for sale only, and installation/setup work should be arranged by the customer. Please note that returns or exchanges cannot be accepted for this product.
If you require technical assistance or have questions not covered in this manual, please contact your retailer or the ASKO customer support in your region. Always provide your product model number (W2084) and serial number when seeking support.
