VOOPOO Drag 3 Kit Marsala User Manual

Introduction

The VOOPOO Drag 3 Kit is a high-performance sub-ohm vaping device designed for an enhanced vapor production experience. It combines a powerful mod with the innovative TPP Pod Tank, offering versatility and ease of use. This manual provides essential information on how to set up, operate, maintain, and troubleshoot your Drag 3 Kit to ensure safe and optimal performance.

Image: VOOPOO Drag 3 Kit Marsala. This image displays the complete device, featuring the main mod unit with its distinctive Marsala red leather grip and the TPP Pod Tank securely mounted on top. The screen on the side of the mod is visible, indicating power settings.

Safety Information

Please read all safety warnings carefully before using this product. Improper use can result in fire, injury, or property damage.

• This product is intended for adult smokers and vapers only. Keep out of reach of children and pets.
• Do not use damaged batteries or chargers. Use only external 18650 batteries (not included) that are in good condition and suitable for high-drain devices.
• Do not expose the device to extreme temperatures, direct sunlight, or water.
• Always turn off the device when not in use or when carrying it in a pocket or bag.
• Ensure proper ventilation when charging batteries.
• Do not overcharge or over-discharge batteries.
• Dispose of batteries and electronic waste responsibly according to local regulations.
• This product contains no nicotine.

Package Contents

Verify that all items are present in your package:

• 1 x VOOPOO Drag 3 177W Vape Device
• 1 x TPP 2ml Pod Tank
• TPP Coils (specific types and quantities may vary by kit version)
• 1 x USB Charging Cable
• 1 x User Manual

Product Overview

The VOOPOO Drag 3 Kit consists of two main parts: the Drag 3 Mod and the TPP Pod Tank.

• Drag 3 Mod: This is the main power unit, housing the GENE FAN 2.0 chip, battery compartment for dual 18650 batteries, a display screen, and control buttons. It features a durable zinc alloy and leather construction.
• TPP Pod Tank: A 2ml capacity tank designed for TPP coils, featuring a magnetic connection to the mod and adjustable bottom airflow. It combines the convenience of a pod with the performance of a sub-ohm tank.

Setup

1. Battery Installation

1. Open the battery door located at the bottom of the Drag 3 Mod.
2. Insert two 18650 batteries (not included) according to the polarity indicators (+/-) inside the battery compartment.
3. Close the battery door securely.

2. Coil Installation

1. Remove the TPP Pod Tank from the mod.
2. Flip the tank upside down.
3. Push the desired TPP coil firmly into the coil slot at the bottom of the tank. Ensure it is seated correctly.

3. E-liquid Filling

1. Locate the silicone plug at the bottom of the TPP Pod Tank.
2. Lift the plug to reveal the filling port.
3. Carefully fill the tank with your preferred e-liquid (up to 2ml capacity). Avoid overfilling.
4. Securely close the silicone plug.

4. Priming the Coil

After filling, let the tank stand for at least 5-10 minutes to allow the e-liquid to fully saturate the coil. This prevents dry hits and extends coil life.

5. Attach Tank to Mod

Place the filled TPP Pod Tank onto the Drag 3 Mod. It will be held in place by strong magnets.

Operating Instructions

Power On/Off

• Press the fire button 5 times rapidly to turn the device on or off.

Adjusting Wattage

• Once powered on, use the '+' and '-' adjustment buttons to increase or decrease the wattage. The recommended wattage range for your installed coil will be displayed or can be found on the coil itself.

Mode Selection

The Drag 3 features multiple modes:

• Smart Mode: Automatically detects the installed PnP or TPP coil and sets an appropriate wattage, preventing accidental coil burnout.
• Super Mode: Activates with low-resistance coils, increasing firing speed for enhanced vapor production.
• RBA Mode: Allows full manual control over wattage for advanced users.
• Temperature Control (TC) Mode: For use with specific coil materials (e.g., Ni, Ti, SS). (Note: This mode might require a firmware update or specific settings, refer to the official VOOPOO website for detailed TC instructions if needed).

To switch modes, press the fire button 3 times rapidly.

Vaping

• Press and hold the fire button while inhaling from the mouthpiece. Release the button when you finish inhaling.

Charging

• Connect the USB charging cable to the charging port on the device and then to a suitable USB power source.
• The screen will display charging status. It is recommended to charge batteries externally for optimal battery life and safety, though the device supports internal charging.

Adjusting Airflow

• Rotate the TPP Pod Tank on the mod to adjust the airflow. This allows you to customize your draw from a tighter to a looser inhale.

Maintenance

Cleaning the Tank

• Regularly clean the TPP Pod Tank, especially when changing e-liquid flavors or coils.
• Remove the coil and rinse the tank with warm water. Allow it to air dry completely before reassembling. Do not use harsh chemicals.

Replacing Coils

• Coils should be replaced when you notice a burnt taste, reduced vapor production, or diminished flavor.
• Follow the coil installation steps in the "Setup" section.

Device Cleaning

• Wipe the mod with a dry or slightly damp cloth to remove any e-liquid residue or dust.
• Keep the 510 connection and battery contacts clean to ensure good conductivity.

Troubleshooting

Specifications

• Brand: VOOPOO
• Model: Drag 3 Kit Marsala
• Output Wattage: 5-177W
• Battery: Dual 18650 (not included)
• Chipset: GENE.FAN 2.0
• Tank Capacity: 2ml (TPP Pod Tank)
• Coil Compatibility: TPP Coils (and PnP Coils with PnP Pod Tank, sold separately)
• Dimensions: Approximately 25 x 50 x 120 mm (L x W x H)
• Material: Zinc Alloy, Leather

Warranty and Support

VOOPOO products typically come with a limited warranty. Please refer to the warranty card included in your original packaging or visit the official VOOPOO website for detailed warranty terms and conditions.

For technical support, troubleshooting beyond this manual, or warranty claims, please contact VOOPOO customer service or your authorized retailer.

Official Website: www.voopoo.com