briidea RV Tank Sensor Monitor Panel HTMP-01 User Manual

Introduction

The briidea RV Tank Sensor Monitor Panel, model HTMP-01, is designed to provide real-time monitoring of your RV's gray water, black water, fresh water tanks, and battery level. This system helps you manage your tank capacities efficiently, indicating when tanks are full, two-thirds full, one-third full, or empty. It serves as a direct replacement for many existing RV micro monitor systems, offering a compact and easy-to-read interface.

Product Overview

The briidea HTMP-01 monitor panel features a clear display with LED indicators for each tank level and battery status. It includes a pump switch for controlling your water pump. Its compact design allows for flexible installation within your RV.

• Multi-Tank Monitoring: Displays levels for gray, black, and fresh water tanks.
• Battery Level Indicator: Shows the current charge status of your RV battery.
• Easy-to-Read Display: Legible markings and LED lights for clear status indication.
• Integrated Pump Switch: Convenient control for your RV's water pump.
• Compact Design: Space-saving form factor for versatile installation.

Figure 1: Front view of the briidea RV Tank Sensor Monitor Panel, showing LED indicators for tank levels and battery, and a red pump switch.

Figure 2: Dimensions of the monitor panel, measuring approximately 2.6 inches wide, 0.8 inches deep, and 4 inches high.

Specifications

Installation

This section provides instructions for installing the briidea RV Tank Sensor Monitor Panel. Ensure your RV's power is disconnected before beginning installation to prevent electrical shock.

Wiring Diagram

Figure 3: Comprehensive wiring diagram for the M21 Micro Monitor System, showing connections for gray, black, fresh tanks, battery, and pump. Includes wire color codes and sensor placement for fresh and holding tanks.

Wiring Legend

• RED: Filtered Positive (+12VDC)
• WHITE: Ground
• GREY: Gray Tank Sensor Wire
• BROWN: Holding Tank Sensor Wire (often used for Black Tank)
• BLUE: Fresh Tank Sensor Wire
• RED (14 AWG): Pump Supply + (12VDC)
• VIOLET (14 AWG): Water Pump Output

Installation Steps

1. Prepare Mounting Location: Choose a suitable location for the monitor panel, typically near existing RV controls. Ensure there is sufficient space behind the panel for wiring connections.
2. Cut Opening: Carefully cut an opening in the mounting surface according to the panel's dimensions (refer to Figure 2).
3. Connect Wiring: Refer to the "Wiring Diagram" (Figure 3) and the "Wiring Legend" above. Connect the corresponding wires from your RV's existing system to the monitor panel's wires.
   • Connect the RED wire to a filtered positive 12VDC power source.
   • Connect the WHITE wire to a reliable ground point.
   • Connect the GREY, BROWN, and BLUE wires to their respective tank sensors (Gray, Holding/Black, Fresh).
   • For pump functionality, connect the thicker RED (14 AWG) wire to a 12VDC pump supply and the VIOLET (14 AWG) wire to the water pump's positive input.
4. Secure Panel: Once all connections are made and verified, carefully insert the monitor panel into the opening and secure it using appropriate fasteners (not included, typically screws).
5. Test System: Reconnect your RV's power. Turn on the monitor panel and test the tank level indicators and pump switch functionality.

Figure 4: The monitor panel showing its various colored wires for connection to the RV's electrical and sensor systems.

Operation

Operating the briidea RV Tank Sensor Monitor Panel is straightforward. The panel provides visual indicators for tank levels and battery status, along with a switch for your water pump.

1. Power On/Off: The monitor panel typically receives power when the RV's main 12V system is active. There is no separate power button for the display itself; it activates when the RV's power is on.
2. Checking Tank Levels:
   • Observe the LED indicators next to each tank label (GRAY, BLACK, FRESH).
   • The LEDs illuminate to indicate the approximate fill level:
     • C (Full): Tank is full.
     • 2/3 (Two-thirds): Tank is two-thirds full.
     • 1/3 (One-third): Tank is one-third full.
     • E (Empty): Tank is empty.
3. Checking Battery Level:
   • Observe the LED indicators next to the BATTERY label.
   • The LEDs illuminate to indicate the battery charge status:
     • C (Charged): Battery is fully charged.
     • L (Low): Battery charge is low.
4. Operating the Water Pump:
   • Use the red rocker switch labeled "PUMP" to turn your RV's water pump on or off.
   • Flip the switch to the "ON" position to activate the pump and to the "OFF" position to deactivate it.

Maintenance

The briidea RV Tank Sensor Monitor Panel is designed for durability and requires minimal maintenance. Regular checks can ensure its continued optimal performance.

• Cleaning: Wipe the front panel with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the display or markings.
• Wiring Inspection: Periodically check all wiring connections behind the panel and at the tank sensors for tightness and corrosion. Loose or corroded connections can lead to inaccurate readings.
• Sensor Maintenance: Ensure your tank sensors (external to this panel) are clean and free of debris, as buildup can affect their accuracy. Refer to your tank sensor manufacturer's instructions for specific cleaning procedures.
• Environmental Protection: While designed for RV use, protect the panel from extreme moisture or direct water exposure.

Troubleshooting

If you encounter issues with your briidea RV Tank Sensor Monitor Panel, refer to the following common problems and solutions.

Warranty and Support

For warranty information or technical support regarding your briidea RV Tank Sensor Monitor Panel, please refer to the documentation provided with your purchase or contact briidea customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Manufacturer: briidea

Model: HTMP-01