1. Introduction
Thank you for purchasing the Merax Modern LED TV Stand. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your new entertainment center. Please read this manual thoroughly before beginning assembly or operation and retain it for future reference.
2. Safety Information
- Always assemble the TV stand on a soft, clean surface to prevent scratches.
- Ensure all parts are securely fastened before placing a television or other items on the stand.
- Do not exceed the maximum weight capacity of 215 lbs for the entire unit, 110 lbs for the tabletop, and 17 lbs for each drawer.
- Keep small parts away from children during assembly to prevent choking hazards.
- Use only the provided power adapter for the LED lighting system.
- Avoid exposing the LED lights or electrical components to water or excessive moisture.
- Periodically check all connections and fasteners to ensure they remain tight.
3. Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- TV Stand Panels (various sizes)
- Hardware Pack (screws, dowels, cam locks, hinges, drawer slides)
- LED Light Strip
- LED Remote Control
- LED Power Adapter
- Instruction Manual
4. Assembly Instructions
Assembly is required for this TV stand. Please follow the included step-by-step diagrammatic instructions provided in the package. The general process involves:
- Unpacking and Preparation: Carefully unpack all components and lay them out on a clean, soft surface to prevent damage. Identify each part using the provided parts list.
- Frame Assembly: Begin by assembling the main frame of the TV stand using the designated panels and hardware. Ensure all connections are snug but do not overtighten.
- Shelf and Divider Installation: Install the internal shelves and dividers into their respective slots. The stand features multiple open storage spaces for media devices.
- Drawer Assembly: Assemble the central drawer according to the instructions, ensuring the drawer slides are correctly oriented for smooth operation.
- Cabinet Door Installation: Attach the two side cabinet doors using the provided hinges. Adjust hinges as necessary to ensure proper alignment and closure.
- LED Light Strip Installation: Refer to Section 5 for detailed instructions on installing the LED lighting system.
- Final Touches: Attach the plastic foot pads to the bottom of the stand to protect your floor from scratches. Remove any protective film from the high-gloss surfaces after assembly is complete.
Image: Internal structure of the TV stand showing storage compartments and cable management holes.
Image: Close-up of high-quality accessories including foot pads, hinges, and drawer slides.
Image: Dimensional diagram of the Merax TV Stand.
5. LED Lights Setup and Operation
The Merax LED TV Stand features a 16-color LED lighting system with various modes to enhance your living space.
5.1. Installation
- Locate the LED light strip, controller, and power adapter.
- Carefully peel the adhesive backing from the LED light strip.
- Attach the LED strip to the designated area on the TV stand, typically along the underside of the top shelf or within the open compartments. Ensure the surface is clean and dry for optimal adhesion.
- Connect the LED light strip to the controller.
- Connect the power adapter to the controller, then plug the adapter into a standard electrical outlet.
5.2. Operation with Remote Control
Use the provided remote control to operate the LED lights:
- ON/OFF: Press the 'ON' button to turn the lights on, and 'OFF' to turn them off.
- Color Selection: Choose from 16 static colors by pressing the corresponding color buttons on the remote.
- Brightness Adjustment: Use the brightness up/down buttons to adjust the intensity of the selected color.
- Mode Selection: The remote offers 4 dynamic lighting modes:
- FLASH: Rapidly cycles through colors.
- STROBE: Flashes a single color.
- FADE: Smoothly transitions between colors.
- SMOOTH: A slower, more gradual transition between colors.
Image: Remote control for the LED lighting system, displaying various color and mode options.
6. Operating Instructions
The Merax Modern LED TV Stand is designed to accommodate TVs up to 75 inches and provide ample storage for your media components and accessories.
- Placement: Position the TV stand on a flat, stable surface.
- TV Placement: Carefully place your television on the top surface, ensuring it is centered and stable.
- Storage: Utilize the two side cabinets, central drawer, and open shelves for organizing media players, gaming consoles, remote controls, DVDs, and other items.
- Cable Management: The stand includes pre-drilled holes for cable management to help keep wires tidy and out of sight.
Image: Merax TV Stand in a modern living room setting, demonstrating its functional use.
7. Maintenance
To maintain the appearance and longevity of your Merax TV Stand, follow these simple care instructions:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the high-gloss finish.
- Spills: Clean up spills immediately to prevent staining or damage to the finish.
- Dusting: Regularly dust the stand with a dry, soft cloth.
- LED Lights: Ensure the LED light strip and connections are free from dust and debris. Do not attempt to repair the LED strip or power adapter yourself; contact customer support if issues arise.
- Hardware: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.
8. Troubleshooting
If you encounter any issues with your Merax TV Stand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights do not turn on. | Power adapter not plugged in; remote control battery dead; loose connection. | Ensure power adapter is securely plugged into outlet and controller. Check remote control battery and replace if needed. Verify all LED strip connections are secure. |
| LED lights flicker or display incorrect colors. | Loose connection; faulty LED strip or controller. | Check all connections. If problem persists, contact customer support for replacement parts. |
| Drawer does not close properly or is misaligned. | Incorrect installation of drawer slides; obstruction. | Review assembly instructions for drawer slides. Ensure no items are obstructing the drawer's path. Adjust drawer slides if possible. |
| Cabinet doors are misaligned. | Hinges not properly adjusted. | Adjust the screws on the hinges to align the doors. |
| Stand feels unstable. | Loose fasteners; uneven floor. | Check and tighten all assembly fasteners. Ensure the stand is on a level surface. |
9. Specifications
- Brand: Merax
- Model: B09QPMLL4Y
- Color: White
- Product Dimensions: 66.9"W x 13.2"D x 22.4"H
- Recommended Uses: TV stand and entertainment center
- Room Type: Bedroom, Living Room
- Weight Limit (Total): 215 Pounds
- Weight Limit (Tabletop): 110 Pounds
- Weight Limit (Drawer): 17 Pounds
- Number of Shelves: 2 (open compartments)
- Included Components: Shelves, LED lighting system
- Assembly Required: Yes
- Material: Wood composite with high-gloss UV veneer, Metal handles
- LED Lights: 16 colors, 4 dynamic modes
10. Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or contact Merax customer service directly. Please have your model number (B09QPMLL4Y) and purchase date available when contacting support.
