Introduction
Thank you for choosing the EKSA GT1 Cobra Gaming Earbuds. These truly wireless Bluetooth in-ear earbuds are designed for an immersive audio experience with low latency, ideal for gaming and music. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance.
Image: The EKSA GT1 Cobra Gaming Earbuds with their charging case.
What's in the Box
Please check the package contents to ensure all items are present:
- Wireless Charging Case
- EKSA GT1 Cobra Earbuds (Left and Right)
- USB Charging Cable
- Ear Cushions (various sizes)
Image: All components included in the EKSA GT1 Cobra package.
Setup and First-Time Use
1. Initial Charging
Before first use, ensure the earbuds are fully charged. Remove any protective cellophane from the charging contacts on the earbuds. Place both earbuds into the charging case and close the lid. Connect the charging case to a power source using the provided USB cable. The LED indicators on the case will show charging status.
Image: EKSA GT1 Cobra Earbuds inside their charging case, indicating charging status.
2. First-Time Pairing
- Ensure the earbuds are charged.
- Open the charging case and take out both earbuds. They will automatically enter pairing mode.
- On your device (smartphone, tablet, PC), go to Bluetooth settings.
- Search for "EKSA GT1" in the list of available devices and select it to connect.
- Once connected, you will hear an audio prompt, and the earbuds are ready for use.
Video: A detailed guide on how to pair the EKSA GT1 Cobra Earbuds for the first time.
Operating Instructions
The EKSA GT1 Cobra Earbuds feature intuitive touch controls for various functions.
Touch Controls Overview
Image: Visual guide to the touch controls on the EKSA GT1 Cobra Earbuds.
- 1 Tap: Play/Pause music, Answer/Hang up a call.
- 2 Taps: Music switch (Left earbud for previous song, Right earbud for next song).
- 3 Taps: Activate Voice Assistant.
- Press for 2 seconds: Switch between Game Mode and Music Mode.
Call Management
- Answer Call: Single-tap on either earbud.
- Reject Incoming Call: Press and hold for 2 seconds on either earbud.
Music Playback
- Play/Pause: Single-tap on either earbud.
- Previous Track: Double-tap the left earbud.
- Next Track: Double-tap the right earbud.
Game and Music Modes
The EKSA GT1 Cobra Earbuds feature dual modes optimized for gaming and music.
- Switch Mode: Press and hold for 2 seconds on either earbud to toggle between Game Mode (low latency) and Music Mode (enhanced audio quality).
Image: Illustration of the Music Mode and Game Mode functionality.
Low Latency: The earbuds offer a 38ms ultra-low latency in Game Mode, ensuring synchronized audio and video for a competitive gaming experience.
Image: Demonstrating the 38ms ultra-low latency feature of the earbuds.
Battery Life
The EKSA GT1 Cobra Earbuds provide up to 6 hours of continuous use on a single charge. The charging case extends the total playback time by an additional 30 hours, offering a combined total of 36 hours.
Image: Visual representation of the 6+30 hours total battery life.
Maintenance
Water Resistance
The earbuds are IPX4 waterproof, making them resistant to splashes and sweat. This rating does not mean they are suitable for submersion in water. Avoid exposing them to heavy rain or submerging them.
Cleaning
To maintain optimal performance and hygiene, regularly clean your earbuds and charging case.
- Use a soft, dry, lint-free cloth to wipe the earbuds and charging case.
- For ear tips, remove them and clean with mild soap and water, then dry thoroughly before reattaching.
- Avoid using abrasive materials, alcohol, or chemical cleaners.
Troubleshooting
One Earbud Not Working or Pairing Issues
If one earbud is not working or you experience pairing difficulties, follow these steps to reset and re-pair:
- Ensure both earbuds are powered on.
- Press and hold the touch control area on both earbuds for 5 seconds to turn them off.
- Release, then press and hold both earbuds again for 8 seconds until the LED lights on both earbuds flash. This indicates a reset.
- Place both earbuds back into the charging case.
- Open the charging case and take out the earbuds. They will automatically enter pairing mode.
- Go to your device's Bluetooth settings, forget "EKSA GT1" if it's listed, and then re-pair.
Video: Instructions on how to fix issues when one EKSA GT1 Cobra earbud is not working.
General Connectivity Tips
- Ensure your device's Bluetooth is enabled.
- Keep the earbuds and your device within the Bluetooth range (up to 10 meters).
- Avoid physical obstructions between the earbuds and your device.
- If issues persist, try restarting your device.
Specifications
| Brand | EKSA |
| Model Name | GT1 Cobra |
| Model Number | GT1 |
| Colour | Black |
| Ear Placement | In Ear |
| Form Factor | In Ear |
| Noise Control | None |
| Enclosure Material | Plastic |
| Item Weight | 30 Grams |
| Bluetooth Version | 5.0 |
| Bluetooth Range | 10 Metres |
| Frequency Range | 20Hz - 20kHz |
| Audio Driver Type | Dynamic Driver |
| Control Method | Touch |
| Battery Average Life | 36 Hours (with charging case) |
| Water Resistance Level | Waterproof (IPX4) |
| Specific Uses For Product | Gaming |
| Compatible Devices | Laptops, Mobile Phones, Tablets, PC, Smart TVs, All Bluetooth Devices, iOS, Android |
Warranty and Support
Warranty Information
The EKSA GT1 Cobra Gaming Earbuds come with a one-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
Contact Information
For technical support, warranty claims, or further assistance, please contact:
- Manufacturer: EKSA Technologies, China
- Importer (India): GOLOUD, F4 Sai 3 Shivagnaga Dwarkamai, Pattangere village, Rajarajeshwari nagar, Bangalore 560049
- Visit the official EKSA website for support: www.eksa.net