Anwick 2.04 Cubic Feet Electronic Digital Steel Safety Deposit Box User Manual

1. Setup Instructions

Follow these steps to set up your Anwick Electronic Digital Steel Safety Deposit Box.

1.1 Unboxing and Contents Check

Carefully remove the safe from its packaging. Verify that all components are present:

• Anwick Digital Safe Unit
• External Battery Box (x1)
• Foot Mats (x4)
• Master Keys (x2)
• Emergency Keys (x2)
• Expansion Bolts (x2)

Image: All included components for the Anwick Digital Safe, showing the external battery box, four foot mats, two master keys, two emergency keys, and two expansion bolts.

1.2 Battery Installation

The safe requires 4 AA batteries (not included) for operation. Locate the battery compartment, typically on the inside of the safe door. Insert the batteries, ensuring correct polarity.

1.3 Initial Code Setting

Upon first use, or after battery replacement, you will need to set your personal digital code. Refer to the keypad image for button layout.

1. Open the safe using the emergency key and master key combination if it's the first time or if batteries are dead.
2. Locate the red reset button inside the safe, usually on the back of the door or near the battery compartment.
3. Press the reset button. The indicator light on the keypad will flash.
4. Enter your desired 3-8 digit code on the keypad, then press the "#" button to confirm.
5. Test the new code with the safe door open to ensure it works correctly before closing.

Image: Detailed view of the digital keypad on the Anwick safe, showing the display, number buttons (0-9), and special function keys like '*' and '#'.

1.4 Mounting the Safe

For enhanced security, the safe can be mounted to a wall. Use the provided expansion bolts.

1. Choose a suitable location for mounting, ensuring it is a solid surface.
2. Mark the drilling points through the pre-drilled holes at the back of the safe.
3. Drill holes in the wall at the marked positions.
4. Insert the expansion bolts into the drilled holes.
5. Align the safe with the bolts and secure it tightly.

1.5 Emergency Key and External Battery Box Usage

In case of forgotten code or dead batteries, these methods provide access:

• Emergency Key: Insert the emergency key into the hidden keyhole (often behind the keypad cover or a small panel) and turn it while simultaneously turning the main knob to open the safe.
• External Battery Box: If the internal batteries are depleted, connect the external battery box (with fresh AA batteries installed) to the external power port on the keypad. This will temporarily power the safe, allowing you to open it with your digital code.

2. Operating Instructions

This section details the daily operation of your Anwick Digital Safe.

2.1 Opening the Safe with Digital Code

1. Enter your personal digital code (3-8 digits) on the keypad.
2. Press the "#" button.
3. If the code is correct, the indicator light will turn green, and you will hear a beep.
4. Within 5 seconds, turn the knob clockwise to open the safe door.

2.2 Opening the Safe with Master Key and Digital Code

For everyday openings, you can use a master key in conjunction with the digital code.

1. Insert the master key into the main keyhole and turn it.
2. Enter your digital code on the keypad and press "#".
3. Turn the knob to open the safe.

2.3 Closing and Locking the Safe

To lock the safe, simply close the door and turn the knob counter-clockwise until it is securely shut. The safe will automatically lock.

2.4 Changing the Digital Code

To change your personal digital code:

1. Open the safe door.
2. Press the red reset button located inside the safe.
3. Enter your new 3-8 digit code on the keypad.
4. Press the "#" button to confirm.
5. Test the new code with the door open before closing the safe.

2.5 Alarm System

The safe is equipped with a double alarm system:

• Incorrect Code Alarm: If an incorrect digital code is entered 3 consecutive times, the alarm will activate.
• Impact Alarm: If the safe experiences a strong impact, the alarm will activate.

To stop the alarm, enter the correct digital code.

2.6 Internal Features

The safe includes several internal features for convenience and organization:

• Internal Lock Box: An additional small lockable compartment inside the safe for extra privacy and security of smaller items.
• Hooks: Convenient hooks on the inside of the door for hanging keys or small items.
• LED Lights: Internal LED lighting to illuminate the contents of the safe when opened.
• Leather Lining: The interior is covered in leather to protect cherished items from scratches or damage.

Image: The Anwick safe with its door open, revealing a spacious interior with a smaller internal lock box and a shelf. The image highlights the capacity for various valuables.

Image: A close-up view of the internal hooks mounted on the inside of the safe door, designed for hanging small items like keys.

Image: A detailed view of the smaller, lockable internal compartment (lock box) located within the main safe, providing an additional layer of security for sensitive items.

3. Maintenance

Proper maintenance ensures the longevity and reliable operation of your safe.

3.1 Battery Replacement

Replace the 4 AA batteries when the low battery indicator appears on the display, or if the keypad becomes unresponsive. Always use new, high-quality batteries. Refer to section 1.2 for battery installation steps.

3.2 Cleaning

Clean the exterior of the safe with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. The interior leather lining can be gently wiped with a dry cloth.

3.3 Key Storage

Important: Always store your emergency keys and master keys in a secure location outside the safe. If the keys are locked inside and the batteries die or the code is forgotten, you will not be able to access the safe.

4. Troubleshooting

Refer to this section for common issues and their solutions.

4.1 Safe Will Not Open

• Dead Batteries: If the keypad display is blank or dim, the batteries may be depleted. Use the external battery box or the emergency key to open the safe and replace the internal batteries.
• Forgotten Code: If you have forgotten your digital code, use the emergency key to open the safe. Once open, you can reset the code (refer to section 2.4).
• Incorrect Code Entry: Ensure you are entering the correct 3-8 digit code followed by the "#" button.
• Keypad Malfunction: If the keypad is unresponsive even with fresh batteries, try using the emergency key. If the issue persists, contact customer support.

4.2 Alarm Activates Unexpectedly

• Multiple Incorrect Entries: The alarm will sound after 3 incorrect code attempts. Enter the correct code to silence it.
• Impact/Movement: The safe has an impact sensor. Ensure the safe is on a stable surface and not subject to accidental bumps. Enter the correct code to silence the alarm.

4.3 Door Does Not Close/Lock Properly

• Obstruction: Check for any items obstructing the door or the locking bolts.
• Alignment: Ensure the door is properly aligned with the safe body before attempting to close and lock.

5. Specifications

Detailed specifications for the Anwick 2.04 Cubic Feet Electronic Digital Steel Safety Deposit Box.

Image: Diagram illustrating the external and internal dimensions of the Anwick safe in centimeters, including the internal lock box measurements.

6. Warranty and Support

For any questions, concerns, or technical support regarding your Anwick Digital Steel Safety Deposit Box, please contact the manufacturer directly. Refer to your purchase documentation or the Anwick brand store for contact information.

Keep your proof of purchase for warranty claims.