Introduction
Thank you for choosing the VIANIS V82093 3-Head Outdoor Lamp Post Light. This product is designed to provide reliable and efficient outdoor illumination with its durable construction and integrated dusk-to-dawn sensor. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your lamp post light.
Safety Information
- Electrical Safety: Installation must be performed by a qualified electrician or a person with adequate knowledge of electrical wiring. Always turn off power at the circuit breaker before installation, maintenance, or bulb replacement.
- Grounding: Ensure the fixture is properly grounded to avoid potential electrical shock.
- Bulb Type: Use only E26 base bulbs, maximum 100 Watts per head. Do not exceed the recommended wattage. Bulbs are not included.
- Outdoor Use: This product is designed for outdoor use only and is waterproof. However, ensure all connections are sealed properly during installation to maintain water resistance.
- Handling: Handle glass components with care to prevent breakage.
Package Contents
Verify that all components are present before beginning installation:
- Lamp Post Assembly (multiple sections)
- Mounting Accessories (screws, nuts, etc.)
- Template Card for quick positioning
Specifications
| Brand | VIANIS |
| Model Number | V82093 |
| Color | Black Gold |
| Material | Aluminum, Tempered Glass |
| Dimensions (L x W x H) | 30"L x 22.6"W x 10.4"H (Overall) |
| Item Weight | 9.34 kg |
| Power Source | Hardwired (120V AC) |
| Light Source | E26 Socket (Bulbs not included) |
| Number of Light Sources | 3 |
| Max Wattage per Bulb | 100 Watts |
| Control Method | Dusk to Dawn Sensor (Automatic) |
| Water Resistance Level | Waterproof |
| Mounting Type | Pole Mount |
Setup and Installation
This lamp post light is designed for hardwired installation. All necessary mounting hardware and a template card are included to assist with the process. Professional installation is recommended.
Pre-Installation Steps:
- Turn off Power: Before starting any electrical work, ensure the power supply to the installation area is turned off at the main circuit breaker.
- Prepare Ground Masonry: The lamp post requires a stable cement base for mounting. Ensure the ground masonry work is prepared beforehand.
- Base Compatibility: The mounting bracket is designed for a three-bolt mount. If replacing an existing post, verify your current base is compatible or prepare a new one. The template card can be used for quick positioning with existing bolts 7.68 inches apart.
Assembly and Mounting:
- Assemble the Post: Carefully thread the column sections together (Bottom Column, Top Column, Center Body Assembly) as shown in the diagram.
- Secure Base: Attach the bottom column to the post base using the provided machine screws (3).
- Mounting to Cement Base: Position the mounting bracket over the anchor bolts in your cement base. Secure with cap nuts and hex nuts as illustrated.
- Electrical Connection: Connect the supply wire (included, 5-10 inches out from base) and ground wire to your main power supply. Ensure all connections are secure and insulated.
- Install Bulbs: Insert three E26 base bulbs (max 100W each, not included) into the sockets.
- Attach Column Cap: Place the column cap on top of the assembled lamp post.
Operating Instructions
The VIANIS V82093 lamp post light features a built-in dusk-to-dawn photocell sensor for automatic operation.
Dusk-to-Dawn Sensor:
- The integrated sensor detects ambient light levels.
- The light will automatically turn ON at dusk when it gets dark.
- The light will automatically turn OFF at dawn when it gets bright.
- No manual operation is required for daily use.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your lamp post light.
- Cleaning: Periodically clean the tempered glass panels and aluminum frame with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Bulb Replacement: To replace bulbs, ensure power is off. The bottom opening design allows for easy bulb replacement without tools, typically taking less than 1 minute. Use E26 base bulbs, maximum 100W.
- Inspection: Annually inspect the wiring and connections for any signs of wear or damage. Ensure all screws and nuts remain tight.
Troubleshooting
If you encounter issues with your VIANIS lamp post light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at dusk. | 1. Power supply issue. 2. Faulty bulb(s). 3. Sensor obstructed or malfunctioning. | 1. Check circuit breaker and wiring connections. 2. Replace bulbs with new E26, max 100W bulbs. 3. Ensure sensor is clean and not blocked by debris or other light sources. |
| Light stays on during the day. | 1. Sensor obstructed or malfunctioning. 2. Insufficient ambient light reaching the sensor. | 1. Clean the sensor and ensure no objects are blocking it. 2. Relocate the fixture if it's in a shaded area during the day. |
| Light flickers or dims. | 1. Loose wiring connection. 2. Incompatible or faulty bulb. | 1. Turn off power and check all electrical connections. 2. Try a different E26 bulb. |
| Misconception: Product is solar-powered. | Misunderstanding of product features. | This product is hardwired and requires a direct electrical connection. It is not solar-powered. |
Warranty
The VIANIS V82093 3-Head Outdoor Lamp Post Light comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accidents, misuse, abuse, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
Support
For further assistance, technical support, or warranty inquiries, please contact VIANIS customer service through the retailer where the product was purchased or visit the official VIANIS website for contact information.