1. Introduction
Thank you for choosing the ABBIDOT AB-T30 Dog Training Collar. This device is designed to assist in effective and humane dog training, helping to correct unwanted behaviors such as excessive barking, digging, biting, and jumping. It offers multiple training modes and features to ensure a safe and positive training experience for your dog.
2. Safety Information
- This collar is equipped with a keyboard safety lock and an automatic stop function (after 10 seconds in shock mode) to protect your dog.
- Advanced overload protection is integrated.
- Utilize the rubber and silicone conductive contact points for enhanced comfort and safety.
- Do not leave the collar on your dog for more than 12 hours per day.
- Regularly check your dog's neck for any signs of irritation or sores. If irritation occurs, discontinue use and consult a veterinarian.
- This product is intended for training purposes only and should not be used as a punishment tool.
3. Package Contents
- 1 x Collar Receiver
- 1 x Remote Transmitter
- 1 x Adjustable Nylon Strap
- 1 x USB Charging Cable
- 2 x Sets of Conductive Silicone Contact Points (short and long)
- 1 x Test Light Tool
- 1 x User Manual
Image: Main components of the ABBIDOT Dog Training Collar, including the receiver and remote control.
4. Product Features
- 4 Adjustable Training Modes: Tone (1-16 levels), Vibration (1-36 levels), Standard Stimulation (1-15 levels), and Enhanced Stimulation (16-36 levels). These modes allow for tailored training based on your dog's temperament and weight.
- Long Control Range: The collar offers a control range of up to 1000 meters (approximately 3280 feet), ensuring effective training in various outdoor environments.
- IPX7 Waterproof: Both the receiver and remote are IPX7 waterproof, allowing for safe use during water activities or in wet conditions.
- Night Tracking Light: An integrated LED light on the receiver helps you easily locate your dog in low-light conditions or at night, enhancing visibility and safety.
- High-Definition LCD Display: The remote features a clear LCD screen that displays selected modes and battery levels, visible even in bright sunlight.
- Lightweight and Durable Design: The receiver weighs only 50g, ensuring optimal comfort for dogs. The adjustable nylon strap is suitable for dogs weighing between 6 and 55 kg.
- Exceptional Battery Life: The device offers up to 100 days of standby time, 35 days of working time, and a quick 2-hour USB-C charging time.
Image: Visual representation of the four distinct training modes available on the remote control.
Image: The remote control in use, highlighting its 1000-meter range and IPX7 waterproof capability, with a dog near water.
Image: Detailed view of the remote's high-definition LCD display, showing its clarity and various indicators.
Image: The lightweight collar receiver and its adjustable strap, demonstrating suitability for dogs from 6 to 55 kg.
Image: Information graphic detailing the impressive battery life of the training collar system.
5. Setup
5.1 Charging the Devices
- Connect the USB charging cable to the charging ports on both the receiver and the remote transmitter.
- Plug the other end of the USB cable into a standard USB power adapter (not included) or a computer USB port.
- The charging indicator light will illuminate during charging and change color or turn off when fully charged. A full charge typically takes 2 hours.
5.2 Pairing the Remote and Receiver
- Ensure both the remote and receiver are fully charged and turned off.
- Turn on the remote transmitter.
- Press and hold the power button on the receiver until the indicator light flashes rapidly, indicating it's in pairing mode.
- Within 10 seconds, press any training mode button on the remote (e.g., Tone button).
- If pairing is successful, the receiver's indicator light will stop flashing and remain solid.
5.3 Fitting the Collar
- Select the appropriate length of conductive silicone contact points (short for short-haired dogs, long for long-haired dogs) and screw them onto the receiver.
- Place the receiver on your dog's neck, ensuring the contact points touch the skin.
- Adjust the nylon strap so that it is snug but not too tight. You should be able to fit one finger comfortably between the strap and your dog's neck.
- The collar should be positioned below the ears, on the soft part of the neck.
Image: Illustration of the detachable contact points, including options for different fur lengths.
6. Operating Instructions
6.1 Remote Control Overview
The remote transmitter features an intuitive design with dedicated buttons for each training mode and an LCD display for easy monitoring of settings and battery life.
6.2 Training Modes
- Tone Mode: Emits an audible beep. Use this as a warning or a positive reinforcement signal. Adjustable from 1 to 16 levels.
- Vibration Mode: Delivers a gentle vibration. Effective for getting your dog's attention without startling them. Adjustable from 1 to 36 levels.
- Standard Stimulation Mode: Provides a mild static pulse. Use for correcting unwanted behaviors. Adjustable from 1 to 15 levels.
- Enhanced Stimulation Mode: Offers a stronger static pulse for more stubborn behaviors or larger dogs. Adjustable from 16 to 36 levels.
6.3 Adjusting Intensity Levels
Use the rotary knob on the top of the remote to adjust the intensity level for Vibration and Stimulation modes. The selected level will be displayed on the LCD screen.
6.4 Using the Night Tracking Light
Press the dedicated light button on the remote to activate the LED light on the receiver. This feature is useful for tracking your dog in low-light conditions.
7. Maintenance
- Wipe the remote control and receiver with a damp cloth to clean.
- The collar strap can be hand washed with mild soap and water. Ensure the receiver is detached before washing the strap.
- Regularly inspect the contact points and the receiver for any damage or wear.
7.1 Battery Care
- To prolong battery life, avoid fully discharging the devices frequently.
- Store the devices in a cool, dry place when not in use.
- Charge the devices at least once every three months if not used regularly.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Collar receiver not responding to remote. | Not paired; low battery; out of range. | Re-pair the devices; charge both devices; ensure within 1000m range. |
| Short control range. | Environmental interference; low battery. | Avoid areas with strong electromagnetic interference; charge devices fully. |
| Receiver not charging. | Faulty cable or adapter; charging port issue. | Try a different USB cable and adapter; clean charging port. |
| Stimulation not working. | Contact points not touching skin; low battery; level too low. | Adjust collar fit; ensure proper contact; charge receiver; increase stimulation level. |
| Dog shows signs of discomfort. | Collar too tight; prolonged use; high stimulation level. | Loosen collar; reduce wear time; lower stimulation level or use vibration/tone. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | AB-T30 |
| Recommended Dog Weight | 6 - 55 kg (13 - 121 lbs) |
| Product Dimensions (L x W x H) | 15.7 x 11 x 0.1 cm (6.18 x 4.33 x 0.04 inches) |
| Receiver Weight | Approximately 50 grams |
| Battery Type | Lithium Polymer (2 included) |
| Waterproof Rating | IPX7 |
| Control Range | Up to 1000 meters (3280 feet) |
| Material | Nylon (strap) |
| Color | Black |
10. Warranty and Support
ABBIDOT products are designed for durability and performance. For any warranty claims, technical support, or inquiries, please refer to the contact information provided with your purchase or visit the official ABBIDOT brand store on Amazon. We are committed to providing excellent customer service and support for your training needs.
You can visit the ABBIDOT brand store at: ABBIDOT Amazon Store
