Evotech Performance Tail Tidy Installation Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Evotech Performance Tail Tidy, model PRN015775, designed specifically for the Yamaha YZF-R7 motorcycle (2022 models and onwards). This product is engineered to integrate seamlessly with your motorcycle's design, replacing the standard rear license plate holder with a more compact and aesthetically pleasing unit.

The Evotech Performance Tail Tidy features a custom LED license plate light and is constructed from high-quality, lightweight materials for durability and longevity.

2. Safety Information

Please read all instructions carefully before beginning installation. Improper installation can lead to damage to the product, motorcycle, or personal injury. If you are unsure about any step, consult a qualified motorcycle technician.

• Ensure the motorcycle is stable and securely supported on a stand before commencing work.
• Turn off the ignition and disconnect the battery to prevent electrical shorts during installation.
• Wear appropriate personal protective equipment, including gloves and eye protection.
• Keep all fasteners and small parts organized to prevent loss.
• Do not overtighten fasteners, as this can strip threads or damage components. Refer to your motorcycle's service manual for specific torque specifications if available.

3. Package Contents

Verify that all components are present before starting the installation:

• Evotech Performance Tail Tidy main assembly
• Integrated LED license plate light
• All necessary fixings (bolts, nuts, washers)
• License plate adapters (for varied plate hole alignments)

If any parts are missing or damaged, please contact Evotech Performance customer support.

4. Setup and Installation

The installation process involves removing the original fender assembly and installing the new Evotech Performance Tail Tidy. While general steps are provided here, detailed pictorial instructions are available for download from the official Evotech Performance website, which we recommend consulting for visual guidance.

4.1 Preparation

1. Park the motorcycle on a level surface and secure it using a paddock stand or similar support.
2. Turn off the ignition and remove the key. Disconnect the negative terminal of the battery.
3. Identify and locate the existing rear fender assembly, including the license plate holder, turn signals, and license plate light wiring.

4.2 Removal of Original Fender

1. Carefully disconnect the wiring for the license plate light and any rear turn signals from the main harness. Note the connections for reinstallation if using original turn signals.
2. Unbolt and remove the standard rear fender assembly from the motorcycle frame. Keep original fasteners in case they are needed for other purposes.

4.3 Installation of Evotech Performance Tail Tidy

1. Position the Evotech Performance Tail Tidy assembly onto the mounting points on the motorcycle.
2. Secure the Tail Tidy using the provided fixings. Ensure all bolts are finger-tight before final tightening.
3. Connect the integrated LED license plate light wiring to the motorcycle's electrical system. Ensure correct polarity.
4. If using the original turn signals, mount them to the designated points on the Tail Tidy (if applicable) and reconnect their wiring.
5. Attach your license plate to the Tail Tidy. Use the provided license plate adapters if the holes on your plate do not align directly with the Tail Tidy's mounting points.
6. Once all components are in place, progressively tighten all fasteners to a secure fit. Avoid overtightening.

4.4 Post-Installation Check

1. Reconnect the motorcycle battery.
2. Turn on the ignition and test the license plate light and any connected turn signals to ensure they function correctly.
3. Visually inspect all installed components to ensure they are securely fastened and do not interfere with any moving parts of the motorcycle.

Figure 1: The Evotech Performance Tail Tidy main assembly, showcasing its sleek, black powder-coated aluminum construction and integrated LED light housing.

Figure 2: Side view of the Yamaha YZF-R7 with the Evotech Performance Tail Tidy installed, demonstrating how it streamlines the rear profile compared to the factory fender.

Figure 3: Rear-side perspective of the Yamaha YZF-R7 featuring the Evotech Performance Tail Tidy, highlighting the compact design and the placement of the license plate.

Figure 4: Direct rear view of the Yamaha YZF-R7 equipped with the Evotech Performance Tail Tidy, showing the clean integration and the visibility of the license plate and turn signals.

5. Operation

The Evotech Performance Tail Tidy is a fixed component and does not require active operation. Once installed, its primary function is to securely hold the license plate and provide illumination via its integrated LED light. Ensure the license plate light is always functional when riding, especially at night, to comply with local regulations.

6. Maintenance

Regular maintenance will ensure the longevity and proper function of your Tail Tidy.

• Cleaning: Clean the Tail Tidy regularly with a mild soap and water solution. Avoid abrasive cleaners or solvents that could damage the powder-coated finish.
• Inspection: Periodically check all fasteners for tightness, especially after the first few rides. Vibrations can sometimes loosen bolts.
• Electrical Check: Ensure the LED license plate light is functioning correctly. If it fails, check wiring connections before considering replacement.
• Damage: In case of any impact or damage, inspect the Tail Tidy for cracks or bends. Replace damaged components immediately to maintain structural integrity and safety.

7. Troubleshooting

If you encounter issues with your Evotech Performance Tail Tidy, refer to the following common problems and solutions:

• License Plate Light Not Working:
  • Check electrical connections for proper seating and polarity.
  • Ensure the motorcycle's battery is fully charged and connected.
  • Inspect the wiring for any cuts or pinches.
• Tail Tidy Feels Loose:
  • Re-tighten all mounting bolts. Do not overtighten.
  • Ensure all washers and spacers (if any) are correctly installed.
• License Plate Does Not Fit:
  • Utilize the provided license plate adapters to adjust for different hole patterns.
  • Ensure the license plate is oriented correctly.

For issues not covered here, please contact Evotech Performance customer support.

8. Specifications

9. Warranty and Support

Evotech Performance products are manufactured to high standards and typically come with a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official Evotech Performance website or contact their customer service directly.

For technical assistance, missing parts, or warranty claims, please contact Evotech Performance customer support through their official channels. When contacting support, please have your product model number (PRN015775) and purchase information readily available.